STD heads
Re: STD heads
Thanks. Now I found a 58 pan with numbered cases, but it has STD heads......Appreciate the help !
-
- Senior Member
- Posts: 1014
- Joined: Fri Apr 18, 2003 12:26 pm
- Bikes: *
- Location: Sultan, WASH
- Been thanked: 6 times
- Contact:
Re: STD heads
http://www.geocities.com/mbskeam/pics2.html
STD heads and Shovel intake ports
these are good heads you cant go wrong
mbskeam
STD heads and Shovel intake ports
these are good heads you cant go wrong
mbskeam
-
- Inactive member
- Member
- Posts: 17
- Joined: Mon Jan 14, 2008 5:35 pm
- Bikes: 47 knuk custom,Aftermarket pan performance custom
- Location: NH
- Been thanked: 2 times
Re: STD heads
I've read this string and referenced info about the manifold for the STD heads with great interest. Not being intimately familiar with this Shovel type manifold can you tell me if this is true? If using "O" ring type manifold sealing the clamp actually clamps against the nipple and manifold thereby creating a rigid metal to metal mounting across the two, versus the clamp squeezing the rubber band type and allowing continual movement and flexing of the manifold. Seems like rigid is a better situation. Drawback is that there's a lot less sealing surface with the "O" ring versus the band and the band seems more forgiving of poor allignment at lease for the short term.
Dick
Dick