Correct finish buddy seat brackets etc?
-
- Member
- Posts: 348
- Joined: Mon Jul 11, 2011 3:09 pm
- Bikes: "50 FL Panhead, '47 WL, '57 165cc
- Location: Georgia
- Has thanked: 11 times
- Been thanked: 2 times
Correct finish buddy seat brackets etc?
Were the early Panhead buddy seat brackets/springs/hardware parkerized or painted black? And also the bar catcher bracket that mounts on the rear fender? Thank you for your help.
-
- Senior Member
- Posts: 826
- Joined: Tue Nov 18, 2008 7:33 pm
- Bikes: 1952 FL
2020 Honda Super Cub - Location: Estero Florida
- Has thanked: 49 times
- Been thanked: 57 times
Re: Correct finish buddy seat brackets etc?
Buddy seat brackets, yokes, springs and hook on top of rear fender painted black.
All nuts, bolts, washers, short extenders parkerized.
All the hardware attached to the seat itself is parkerized except for 2 lower spring plates and 2 flat plates that are cad. plus the 2 wing nuts.
I might be incorrect about the seat hardware being cad, hopefully someone will chime in and help me out.
Jim
All nuts, bolts, washers, short extenders parkerized.
All the hardware attached to the seat itself is parkerized except for 2 lower spring plates and 2 flat plates that are cad. plus the 2 wing nuts.
I might be incorrect about the seat hardware being cad, hopefully someone will chime in and help me out.
Jim
-
- Moderator
- Senior Member
- Posts: 3713
- Joined: Mon Dec 01, 2003 11:38 pm
- Bikes: '42 WLA X 2, '55FL, '93 Ultra Classic, '91 Fatboy, '97 883, '03 Rokon Trailbreaker, '83 GPz 750.
- Has thanked: 71 times
- Been thanked: 128 times
Re: Correct finish buddy seat brackets etc?
here are some shots from a very crusty buddy i traded away on wla parts a few years back.
from palmer's i was able to narrow it down to a '46
john
from palmer's i was able to narrow it down to a '46
john
You do not have the required permissions to view the files attached to this post.