1953 OHV deluxe fender emblem
-
- Member
- Posts: 219
- Joined: Fri Dec 30, 2005 2:28 am
- Bikes: 62 Duoglide, 48 Pan, 1990 FLHTCU
- Location: Kansas
- Has thanked: 299 times
- Been thanked: 63 times
1953 OHV deluxe fender emblem
can anyone give me the correct measurements for mounting the OHV emblems on the front fender? Maybe from the spears? Thanks Dave
-
- Member
- Posts: 196
- Joined: Wed Jul 22, 2009 9:32 pm
- Bikes: XXXXXXXXXXXXXXX
- Location: OHIO
- Been thanked: 19 times
Re: 1953 OHV deluxe fender emblem
Dave,
I didn't pull the emblems off. But you can see in the photo's I posted (misc.) where the threaded mounting post is at on the emblem. 4 1/2" from the seam of the front tip and the side spear, and 1 7/8" from the fenders lower lip. Emblems are 2 1/4" c/c. Maybe someone else will chime in? Hope that helps.
Tony
I didn't pull the emblems off. But you can see in the photo's I posted (misc.) where the threaded mounting post is at on the emblem. 4 1/2" from the seam of the front tip and the side spear, and 1 7/8" from the fenders lower lip. Emblems are 2 1/4" c/c. Maybe someone else will chime in? Hope that helps.
Tony