I cant find the spacers I need that go between my front bumper and fender on my 59 pan.There aproximatley 1/4" thick 5/16 I.D. and 3/4 O.D . Short of cutting some round bar into 4 peices and drilling them ,does anyone have any idea what I can use in place ?? All kinds of things have spacers of different kinds but I don't see anything on my old junk chevy pickup ,or the other things kicking around here that I can use ..I dont mind drilling the center out if somethings close.
Thanks Neil
need to make 4 spacers HD part #91089-58
-
- Member
- Posts: 352
- Joined: Sat Dec 20, 2008 3:24 am
- Bikes: 1995 Roadking(still brand new)
1991 HD springer
1959 pan (I'm reassembling)
1991 BMW 75RT. - Location: Calgary
- Has thanked: 91 times
- Been thanked: 18 times
Re: need to make 4 spacers HD part #91089-58
I'm answering my post to say I just found these (chrome plated ) at JP Cycle ,but there $15.00 us each... I'd rather find something I can use thats way cheaper.
Neil
Neil
-
- Senior Member
- Posts: 1600
- Joined: Fri Oct 03, 2008 2:57 am
- Bikes: Pan
FLHP Evo
E-H Super X
Chubble head hack
Servi-car
Topper(s)
Model 64D (Hey its got 3 wheels!) - Location: Indianapolis
- Has thanked: 399 times
- Been thanked: 364 times
Re: need to make 4 spacers HD part #91089-58
I got these at a local HD dealer for a lot less than that. If that doesnt pan out, Old Dude has them for 3 bucks a piece.
http://www.olddude.com/pricelist.htm" onclick="window.open(this.href);return false;
http://www.olddude.com/pricelist.htm" onclick="window.open(this.href);return false;
-
- Member
- Posts: 352
- Joined: Sat Dec 20, 2008 3:24 am
- Bikes: 1995 Roadking(still brand new)
1991 HD springer
1959 pan (I'm reassembling)
1991 BMW 75RT. - Location: Calgary
- Has thanked: 91 times
- Been thanked: 18 times
Re: need to make 4 spacers HD part #91089-58
Many thanks,I'll check the site out. I sent an e,mail to Old dude this morning and I better check for his reply
-
- Member
- Posts: 352
- Joined: Sat Dec 20, 2008 3:24 am
- Bikes: 1995 Roadking(still brand new)
1991 HD springer
1959 pan (I'm reassembling)
1991 BMW 75RT. - Location: Calgary
- Has thanked: 91 times
- Been thanked: 18 times
Re: need to make 4 spacers HD part #91089-58
I have an email from old dude ,he has them for 4 bucks each and I just finished ordering them. Thanks,Neil