Hi guys
My rear fender has been shortened by a few inches at the front. Not sure why. But could anyone let me know how near the fender is to the swinging arm. I have the correct oil tank mounting plate bracket. Does it tuck behind that or not? A picture would be good if anyone has one. I can then get my metal man to stitch a bit on.
Thanks
Paul
1959 rear fender
-
- Member
- Posts: 43
- Joined: Wed Sep 30, 2015 4:31 am
- Bikes: 1952 WL , 1959 Panhead
Re: 1959 rear fender
Hi Paul, I'm not sure if you have the info you require as yet, I have just spent the last week or so fitting the rear end on my 59.
Let me know if you still need the measurement and I will take some pics for you.
Let me know if you still need the measurement and I will take some pics for you.
-
- Member
- Posts: 56
- Joined: Sat Nov 07, 2015 1:41 am
- Bikes: flh 1959, 850 Commando, 50 Inter, 2 x ES2's, Model 7, Bsa sloper, Triumph Sprint
- Location: Rochford, Essex, UK
- Has thanked: 12 times
Re: 1959 rear fender
Thanks for the offer. I found a guy local to me with a spare fender that I can copy. It seems to be from a 65 bike but I can get the measurements I need from it.
Cheers
Paul
Cheers
Paul
-
- Member
- Posts: 43
- Joined: Wed Sep 30, 2015 4:31 am
- Bikes: 1952 WL , 1959 Panhead