Today I thought about hangin my front fender. Well, because the roads may be wet but it aint rainin so I could go for a put without eating road spray, this time a year our road spray is nasty. Ok, the right side fork leg has 5/16 blind holes, the other side has open holes and no threads. Now I ponder what parts I got up there. so my question would be, is that a miss match pair of legs or not? Thanks
Chuck
Front fender mount
-
- Member
- Posts: 152
- Joined: Sun Sep 02, 2012 3:18 pm
- Bikes: 1956 FLH, 1969 FL, 2014 RoadKing
- Location: Washington State
- Has thanked: 7 times
- Been thanked: 3 times
-
- Moderator
- Senior Member
- Posts: 8413
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 484 times
- Been thanked: 2958 times
Re: Front fender mount
Sounds like you have a pair of legs off of a Servi-Car. The left side had smooth bore holes with a milled flat on the outside. That was where the tow bar mount attached.
Robbie
Robbie