rear fender strip clips 53 fl model

[rmcrh]

1953 FL
I need the clips x 2 for one of the rear fender strips approx 3/4 inch wide. I tried Old Dude and have not had a response. Any other ideas? Thank you in advance.

[4pans1man]

RMCRH,

I posted a photo of the one's I used my '53's rear fender trim. Is this what your looking for?

...........Tony

[rmcrh]

Yes it is the ones we are looking for.The single one not the set of three. The ones I had were a wire set although those would do very well. Where did you get them ?
Thanks for the response.
Robb

[4pans1man]

Robb,

They came with the fender trim that I bought for my '53. PM me and maybe we can work out a price for the ones that you need.

Tony

[rmcrh]

That would be great. I need 2, one broke and the other fell off in transit on my way home. It may be in my bag although a spare makes sense. My direct e mail is rmcrh@shaw.ca. The parts would be sent to RRHAWG Newport Oregon

[FlatHeadSix]

years ago, when we used to have real auto parts stores, they all had a section in the store with floor to ceiling DORMAN parts bins. If you pulled enough drawers open you could always find what you needed. Those clips were standard automotive trim strip clips, you could buy a handful for a dollar. Now-a-days they have a rack in the AutoZone or O'Reily's called HELP, sometimes you can get lucky. Do a search for Chrysler (or any of the old stuff that had stainless trim strips), you'll find them.
http://automotive-hardware.com/1-pcs-10 ... -p-60.html
mike

[rmcrh]

Thank you I will check

[joe]

I got lucky at an old NAPA store in Gulf Shore AL. .(clipwise)