Drive chain recommendations
Drive Chain, any recommendations?
-
- Member
- Posts: 133
- Joined: Wed Jun 30, 2004 1:56 am
- Bikes: 2001 Road King w/sidecar
1947 Servi-car - Location: Redmond, OR
- Been thanked: 3 times
Drive chain recommendations
Time to replace what looks like a very well used drive chain on my 64 FLH. Any recommendations? I'll I can find is I need a 530? series chain, and my old one was 102 links.
Funny when you search for "harley chains" on places like ebay to search for some info, the search only lists two listings. All others are jap type bike chains, and there are hundereds of those, wonder why?
Seems like TSUBAKI makes a good chain, but tough to find the application that will correctly fit my 64.
Leads or advise?
Thanks in advance
Funny when you search for "harley chains" on places like ebay to search for some info, the search only lists two listings. All others are jap type bike chains, and there are hundereds of those, wonder why?
Seems like TSUBAKI makes a good chain, but tough to find the application that will correctly fit my 64.
Leads or advise?
Thanks in advance
-
- Junior Member
- Posts: 3
- Joined: Thu Mar 11, 2004 10:27 pm
Re: Drive chain
Diamond 530, standard chain, 102 links... VT#19-0321
V-Twin catalog. Hope this helps ya.
Roadside
V-Twin catalog. Hope this helps ya.
Roadside
-
- Member
- Posts: 88
- Joined: Fri Jan 14, 2005 3:35 am
- Bikes: 1955 FL on a 54 frame
2012 Heritage Softail Classic - Location: Inola, Oklahoma
- Has thanked: 1 time
- Been thanked: 1 time
Re: Drive chain
64duo
Try Jireh Cycles 1-877-681-0448. They have had better prices on most things that I have been pricing. I have ordered from them & so far they are easy to deal with. Shipped quickly.
Diamond 530/102 chain XDL, Part # 52-195
Diamond 530/102 chain Standard, Part # 52-43
Red
Try Jireh Cycles 1-877-681-0448. They have had better prices on most things that I have been pricing. I have ordered from them & so far they are easy to deal with. Shipped quickly.
Diamond 530/102 chain XDL, Part # 52-195
Diamond 530/102 chain Standard, Part # 52-43
Red
-
- Member
- Posts: 412
- Joined: Fri Aug 23, 2002 10:05 pm
Re: Drive chain
Diamond has been around for-friggin-ever. This is the first I have heard they have a shoddy product. I think you could go with Diamond or Tsubaki. I got my Diamond chain from an outfit that supplies bearings and the like to industrial users and has an office here in Brooklyn, which was cheaper than buying from a motorcycle-oriented retail supplier. Because it was such a small order (one chain), I had to wait until they could add it to an order from one of their other customers.
I did have trouble getting the side plates to close on the pins of the master link, but when I called Diamond the guy I talked to was very responsive and even sent me two new master links for free.
I did have trouble getting the side plates to close on the pins of the master link, but when I called Diamond the guy I talked to was very responsive and even sent me two new master links for free.
-
- Member
- Posts: 88
- Joined: Fri Jan 14, 2005 3:35 am
- Bikes: 1955 FL on a 54 frame
2012 Heritage Softail Classic - Location: Inola, Oklahoma
- Has thanked: 1 time
- Been thanked: 1 time
Re: Drive chain
I agree with Kell. I have been using Diamond chain on all types of equipment for over 30 years. Some of the equipment was severely abused and Diamond chain always performed better than I ever dreamed a chain should. Kell is also right that buying it from an industrial supply house would most likely be cheaper. I could have gone to a local oilfield supply house and bought a chain, but I was lazy and just ordered it on line.
I am sure that there are other quality chains on the market, & maybe even better than Diamond. But I am hardheaded & generally stick with parts than I trust.
Red
I am sure that there are other quality chains on the market, & maybe even better than Diamond. But I am hardheaded & generally stick with parts than I trust.
Red
-
- Member
- Posts: 133
- Joined: Wed Mar 30, 2005 11:07 am
- Has thanked: 5 times
- Been thanked: 70 times
Re: Drive chain
I generally have a "Buy American" attitude, and had always used Diamond chain, both the industrial and motorcycle O-ring type. After building a 93" pan from the ground up and using the Diamond O-ring, I had the chain break after only about 500 miles. I was sitting on the side of the road hand filing the pins to put in a repair link and get home when I noticed that the next link was cracked by both pins. Further inspection revealed that every link was cracked. Called the shop and had a new chain brought out and after a few hundred miles that one also showed cracked links. I have talked to several people since then who have had the same experience. I changed to Tsubaki, and had no more trouble and have continued to use it since.
-
- Senior Member
- Posts: 1014
- Joined: Fri Apr 18, 2003 12:26 pm
- Bikes: *
- Location: Sultan, WASH
- Been thanked: 6 times
- Contact:
Re: Drive chain
hello,
I have run diamond, whitney and tsubaki industrial chain over the years , and they all do the same thing........S T R E T C H. I did have one chain crack a plate but that was because it was rubbing the inner primary, it got kinda warm and lost its heat treat?
now I just replace the chain instead of moving rear wheel
I run these chains hard.
64duo....I get this bulk chain thru my work. If you like I can get a price for you. Shipping is likely to cost more. LOL, I think it will go thru with the 3.85 box in the mail
mbskeam
I have run diamond, whitney and tsubaki industrial chain over the years , and they all do the same thing........S T R E T C H. I did have one chain crack a plate but that was because it was rubbing the inner primary, it got kinda warm and lost its heat treat?
now I just replace the chain instead of moving rear wheel
I run these chains hard.
64duo....I get this bulk chain thru my work. If you like I can get a price for you. Shipping is likely to cost more. LOL, I think it will go thru with the 3.85 box in the mail
mbskeam
-
- Member
- Posts: 133
- Joined: Wed Jun 30, 2004 1:56 am
- Bikes: 2001 Road King w/sidecar
1947 Servi-car - Location: Redmond, OR
- Been thanked: 3 times
Re: Drive chain
mbskeam,
maybe I'm wrong. I am running a belt primary. So I am looking for low maintenance chain. I was actually looking at the TSUBAKI 530 Sigma (o-ring). Not cheap though, about $120. The bulk chain idea sounds cheaper. Still have time to figure this out, I'm just putting the parts all back on. (engine is in today) ;D
64duo
maybe I'm wrong. I am running a belt primary. So I am looking for low maintenance chain. I was actually looking at the TSUBAKI 530 Sigma (o-ring). Not cheap though, about $120. The bulk chain idea sounds cheaper. Still have time to figure this out, I'm just putting the parts all back on. (engine is in today) ;D
64duo
-
- Member
- Posts: 88
- Joined: Fri Jan 14, 2005 3:35 am
- Bikes: 1955 FL on a 54 frame
2012 Heritage Softail Classic - Location: Inola, Oklahoma
- Has thanked: 1 time
- Been thanked: 1 time
Re: Drive chain
Flat38
I have no experience w/O-Ring chains and opted for the Diamond XDL because I am to cheap to pay the extra for the O-Ring chain. Seams like I remember that guys having trouble with O-Ring chains back in my younger days, years ago. If I have cracking trouble with the Diamond, I will try a Tsubaki.
Mbskeam
Many years ago I rode a Honda 750 (still have it in pieces) that I ran the piss out of all of the time and drag raced it on the weekends. I stretched the hell out of chains. If stretching becomes a problem with my panhead, I will most likely do the same as you are, use industrial chain & change it when it stretches to much.
Red
I have no experience w/O-Ring chains and opted for the Diamond XDL because I am to cheap to pay the extra for the O-Ring chain. Seams like I remember that guys having trouble with O-Ring chains back in my younger days, years ago. If I have cracking trouble with the Diamond, I will try a Tsubaki.
Mbskeam
Many years ago I rode a Honda 750 (still have it in pieces) that I ran the piss out of all of the time and drag raced it on the weekends. I stretched the hell out of chains. If stretching becomes a problem with my panhead, I will most likely do the same as you are, use industrial chain & change it when it stretches to much.
Red
-
- Member
- Posts: 412
- Joined: Fri Aug 23, 2002 10:05 pm
Re: Drive chain
I can entertain the idea that Diamond chain won't cut the mustard if you have a big-inch, high horsepower engine. Tsubaki for you all. I'll stick with Diamond on my old panhead.
P.S. A little food for thought:
Does a chain actually stretch, or does it get longer because of wear loosening the links?
If you lay the chain out flat and straight and can scrunch it up to the original length, it didn't actually stretch.
P.S. A little food for thought:
Does a chain actually stretch, or does it get longer because of wear loosening the links?
If you lay the chain out flat and straight and can scrunch it up to the original length, it didn't actually stretch.
-
- Member
- Posts: 88
- Joined: Fri Jan 14, 2005 3:35 am
- Bikes: 1955 FL on a 54 frame
2012 Heritage Softail Classic - Location: Inola, Oklahoma
- Has thanked: 1 time
- Been thanked: 1 time
Re: Drive chain
Kell
You are exactly right. The term "stretch" is actually wear on the pins and rollers. If you lay a used chain out on the floor and compress it to it's shortest length, then pull it out to it's maximum length it will be shorter than it was new by about the same as it will be longer than it was new. There is some actual stretch involved, but it is mostly wear. With the oilfield equipment that I have maintained, there are maximum limits set for the difference between compressed and extended. If when inspecting a chain the difference is beyond a certain measurement per link, you replace the chain. I would imagine that this dimension is listed on Diamonds web sight somewhere or can be obtained from one of their dealers. Here is the link to Diamond, I have not tried to find any information on it, but they do have a Tech section.
http://www.diamondchain.com/
Red
You are exactly right. The term "stretch" is actually wear on the pins and rollers. If you lay a used chain out on the floor and compress it to it's shortest length, then pull it out to it's maximum length it will be shorter than it was new by about the same as it will be longer than it was new. There is some actual stretch involved, but it is mostly wear. With the oilfield equipment that I have maintained, there are maximum limits set for the difference between compressed and extended. If when inspecting a chain the difference is beyond a certain measurement per link, you replace the chain. I would imagine that this dimension is listed on Diamonds web sight somewhere or can be obtained from one of their dealers. Here is the link to Diamond, I have not tried to find any information on it, but they do have a Tech section.
http://www.diamondchain.com/
Red
-
- Member
- Posts: 133
- Joined: Wed Mar 30, 2005 11:07 am
- Has thanked: 5 times
- Been thanked: 70 times
Re: Drive chain
I have found that while industrial chain works OK, the motorcycle 0-ring chain lasts much longer and does not need adjustment nearly as often. If you add up the price of the number of industrial chains you would have to buy during the life of a good motorcycle chain, the cost is about the same. Compare the size of the side plate on industrial chain to any motorcycle chain, 0-ring or not, and you will see that the cycle plates are much thicker. Internal construction is also different.
-
- Senior Member
- Posts: 1014
- Joined: Fri Apr 18, 2003 12:26 pm
- Bikes: *
- Location: Sultan, WASH
- Been thanked: 6 times
- Contact:
Re: Drive chain
hello,
but if you look at some bikes they can not run a O-ring chain, as there is no room around the inner primary.this is the case for mine. but I have seen other bikes around the same year have room, go figure. I would run the thicker chain if I could, less maint. and mess.
The other thing about" motorcycle chain" is that there is a huge mark up on it.kinda like a 40.00 bearing from the dealer that you can get at the bearing house for 8.00 or less.
but I guess i'm just a cheap ass,so I've been told.
I agree that chain can be made diff. on the inside.
But they all come off the roll all the same, and just by calling it MC chain it should not cost 4 times that of bulk.
mbskeam
but if you look at some bikes they can not run a O-ring chain, as there is no room around the inner primary.this is the case for mine. but I have seen other bikes around the same year have room, go figure. I would run the thicker chain if I could, less maint. and mess.
The other thing about" motorcycle chain" is that there is a huge mark up on it.kinda like a 40.00 bearing from the dealer that you can get at the bearing house for 8.00 or less.
but I guess i'm just a cheap ass,so I've been told.
I agree that chain can be made diff. on the inside.
But they all come off the roll all the same, and just by calling it MC chain it should not cost 4 times that of bulk.
mbskeam
-
- Inactive member
- Member
- Posts: 400
- Joined: Mon Jan 27, 2003 1:25 pm
- Bikes: *
- Been thanked: 4 times
Re: Drive chain
Hi All
I believe our Pans are not too compatible with O ring chains. O rings are too "fat". I think you can get by using one if your tranny gear is a 22 tooth but not if it is much larger. I run a 25 tooth and it's pretty tight even with the standard Diamond 530.
King
I believe our Pans are not too compatible with O ring chains. O rings are too "fat". I think you can get by using one if your tranny gear is a 22 tooth but not if it is much larger. I run a 25 tooth and it's pretty tight even with the standard Diamond 530.
King