Panhead kicker cover stud length

Post Reply
keiser
Member
Posts: 27
Joined: Thu Jul 12, 2007 2:18 pm

Panhead kicker cover stud length

#1

Post by keiser »

Wondering if anyone knows the stock length of the studs used for the kicker cover on the transmission? It has been a long time since I took it all apart and had a bunch of studs cad plated. I think the ones that came off are a bit shorter than 1.5 inches long but not sure. The nut does not tighten on all the way through the threads using these.
Post Reply

Return to “Transmission, Starter & Shifting”