I have looked in the KB on transmissions and I can't seem to find what I am looking for, so to show how I can confuse myself I am asking this question about the 1st and 2nd gear bushing.
Is the bushing, 35791-36 used for 1st and 2nd gear ... 4 speed transmissions only,
and bushing 35789-36 used in 3 speed w/reverse transmissions only?
Looks like the 35791-36 bushing goes in the 4 speed only, at least that is what I am understanding.
Building a 4 speed foot shift transmission from scratch and want to be correct when I put it together.
Thanks, George
Transmission bushing.
-
- Senior Member
- Posts: 1958
- Joined: Tue Nov 09, 2004 6:02 am
- Bikes: 1942 WLA Type III
Hybrid WL/KH bobber project.
58 FL - Location: Markt Einersheim, Bayern
- Has thanked: 972 times
- Been thanked: 259 times
- Contact:
-
- Moderator
- Senior Member
- Posts: 8378
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 478 times
- Been thanked: 2933 times
Re: Transmission bushing.
George,
For a 4 speed you need one each of 35789-36 and 35791-36. The first is for low gear, the second for 2nd. There is no 2nd gear bushing in a 3&R as it is a sliding gear.
For a 4 speed you need one each of 35789-36 and 35791-36. The first is for low gear, the second for 2nd. There is no 2nd gear bushing in a 3&R as it is a sliding gear.
-
- Senior Member
- Posts: 1958
- Joined: Tue Nov 09, 2004 6:02 am
- Bikes: 1942 WLA Type III
Hybrid WL/KH bobber project.
58 FL - Location: Markt Einersheim, Bayern
- Has thanked: 972 times
- Been thanked: 259 times
- Contact: