FLH positive battery wire gauge
-
- Member
- Posts: 449
- Joined: Mon Aug 05, 2019 8:07 pm
- Bikes: 1948 G 45", 1969 FLH, 1963 FLH, 1965 FLH
- Location: LA
- Has thanked: 243 times
- Been thanked: 99 times
FLH positive battery wire gauge
I’m redoing the battery cable and the starter solenoid cables on my FLh. What are the min gauges? I have a 6 gauge positive wire for the battery to solenoid. Will that be ok ? Or do I need 4 gauge ?
-
- Senior Member
- Posts: 5327
- Joined: Tue Oct 31, 2017 1:00 pm
- Bikes: 1950 Panhead, Resto-Mod
1968 90", 5 Speed Shovelhead,
1984 Home Built Custom Evo 100" Bagger - Location: Knoxville, Tennessee
- Has thanked: 2801 times
- Been thanked: 2159 times
Re: FLH positive battery wire gauge
I always try to use #4 welding cable, but for a true restoration you may want something else.....
-
- Member
- Posts: 40
- Joined: Sat May 20, 2017 4:39 am
- Bikes: 1973 FLH
1998 XL 1200
1948 Panhead (gone) - Location: VIRGINIA
- Has thanked: 5 times
- Been thanked: 11 times
Re: FLH positive battery wire gauge
6ga. seems to be the size on my shovel. IMHO, you should use stranded cable with a PVC outer sheath. This may not be the "correct" cable for a restoration, but this is NOT the cable to swap around for a better "Look"-- it most definitely will put you walking (looking now at my cables, it seems to be high twist-rate copper stranded cable --good engineering practice, I think.) This cable touches hot motor components and rests against the steel frame. A more heat-tolerant insulation material would seem appropiate.flatheadDave wrote: ↑Sat Feb 27, 2021 6:52 pm I’m redoing the battery cable and the starter solenoid cables on my FLh. What are the min gauges? I have a 6 gauge positive wire for the battery to solenoid. Will that be ok ? Or do I need 4 gauge ?
Hope this helps,
Good Luck,
Joe