Camshaft bushings UL1200 1938
Tool for reaming out the bushes
-
- Junior Member
- Posts: 2
- Joined: Wed Jul 21, 2021 11:01 am
- Bikes: UL1200 1938
- Location: Germany
Camshaft bushings UL1200 1938
Hello, my name is Linus and I am writing to you from Germany. I own a Flathead UL1200 from 1938 and I am currently overhauling the engine. I am also changing the camshaft bushings, as they were worn out. I have the tool to ream the bushes in the engine housing and for the two front cams.I am looking for a reamer for the rear inlet cam, the rear exhaust cam and the crankshaft journal in the cover. Can anyone point me in the right direction?And I have one more question. Are the tools shown in the service manual with a Harley Davidson article number still available somewhere and is there a key from the old article numbers to the new ones? Many thanks in advance!
-
- Site Admin
- Senior Member
- Posts: 3289
- Joined: Mon Jan 01, 2001 12:00 pm
- Bikes: 1954 FL
- Location: Holland
- Has thanked: 108 times
- Been thanked: 486 times
Re: Camshaft bushings UL1200 1938
You mean the part numbers? Here: https://www.hydra-glide.net/kb/inf_ov_parts_ex.phpis there a key from the old article numbers to the new ones?
and here: app.php/knowledgebase/category?id=25
-
- Senior Member
- Posts: 2404
- Joined: Wed Jul 07, 2010 4:28 am
- Bikes: 1950Panhead
- Location: USA
- Has thanked: 1 time
- Been thanked: 366 times
Re: Camshaft bushings UL1200 1938
Mcmaster has reamers in usa https://www.mcmaster.com/reamers/
Probably similar place in Germany.
Probably similar place in Germany.
-
- Senior Member
- Posts: 1957
- Joined: Tue Nov 09, 2004 6:02 am
- Bikes: 1942 WLA Type III
Hybrid WL/KH bobber project.
58 FL - Location: Markt Einersheim, Bayern
- Has thanked: 972 times
- Been thanked: 259 times
- Contact:
Re: Camshaft bushings UL1200 1938
Linus,
WW cycles have various reamer sizes.
I have some hand reamers here at home,
If you have a size, I can look at the ones that I have and see if I have the one you need and I can let you borrow it.
I am in Bayern, near Iphofen.
George
WW cycles have various reamer sizes.
I have some hand reamers here at home,
If you have a size, I can look at the ones that I have and see if I have the one you need and I can let you borrow it.
I am in Bayern, near Iphofen.
George
-
- Junior Member
- Posts: 2
- Joined: Wed Jul 21, 2021 11:01 am
- Bikes: UL1200 1938
- Location: Germany