EL Cylinders?
-
- Member
- Posts: 348
- Joined: Mon Jul 11, 2011 3:09 pm
- Bikes: "50 FL Panhead, '47 WL, '57 165cc
- Location: Georgia
- Has thanked: 11 times
- Been thanked: 2 times
EL Cylinders?
Did EL cylinders not have the casting #'s/tags on them? Everytime I see some, no #'s. Or does this mean they're aftermarket?
-
- Senior Member
- Posts: 2405
- Joined: Wed Jul 07, 2010 4:28 am
- Bikes: 1950Panhead
- Location: USA
- Has thanked: 1 time
- Been thanked: 366 times
Re: EL Cylinders?
Original 48 and early 49 cylinders are stamped, later 49 through 52 have casting dates, EL and FL.
- Attachments
-
- cyl2.jpg (25.83 KiB) Viewed 2115 times
-
- cyl1.jpg (19.24 KiB) Viewed 2115 times
-
- Member
- Posts: 348
- Joined: Mon Jul 11, 2011 3:09 pm
- Bikes: "50 FL Panhead, '47 WL, '57 165cc
- Location: Georgia
- Has thanked: 11 times
- Been thanked: 2 times
Re: EL Cylinders?
Thanks for the reply. So, is the 120-48 a common number for both EL and FL? Or for just one? Im looking for some 49 EL cylinders.
-
- Senior Member
- Posts: 2405
- Joined: Wed Jul 07, 2010 4:28 am
- Bikes: 1950Panhead
- Location: USA
- Has thanked: 1 time
- Been thanked: 366 times
Re: EL Cylinders?
I think both, read the cylinder thread to be sure.
https://www.hydra-glide.net/phpBB3/view ... f=5&t=8081
https://www.hydra-glide.net/phpBB3/view ... f=5&t=8081
-
- Senior Member
- Posts: 6937
- Joined: Sun Feb 10, 2002 2:30 am
- Bikes: -
- Location: Central Illinois
- Has thanked: 112 times
- Been thanked: 310 times
Re: EL Cylinders?
KEHughes!
My '49 EL cylinders have nothing at all upon their bases.
I am not aware of anyone producing cylinders with the proper smaller finnage.
....Cotten
My '49 EL cylinders have nothing at all upon their bases.
I am not aware of anyone producing cylinders with the proper smaller finnage.
....Cotten
-
- Member
- Posts: 348
- Joined: Mon Jul 11, 2011 3:09 pm
- Bikes: "50 FL Panhead, '47 WL, '57 165cc
- Location: Georgia
- Has thanked: 11 times
- Been thanked: 2 times
Re: EL Cylinders?
so, If Im looking for oem el cylinders, I shouldn't be too concerned if no stamping or casting?
I have a lead on some standards(but will have to be bored before using) with no broken fins for $200, but no castings. Don't want to get ripped off.
I have a lead on some standards(but will have to be bored before using) with no broken fins for $200, but no castings. Don't want to get ripped off.
-
- Senior Member
- Posts: 6937
- Joined: Sun Feb 10, 2002 2:30 am
- Bikes: -
- Location: Central Illinois
- Has thanked: 112 times
- Been thanked: 310 times
Re: EL Cylinders?
Yes,kehughes wrote:Im still unclear. No casting/stamping are still most likely oem?
Unless there are now reproductions with correct 61" finnage.
That price seems decent for even modern castings.
....Cotten