OEM | OEM | Description | Used on | 10-36 | 16695-36 | Rear cylinder head (marked 5.5) iron | 1936 to 1950 -- G, W & WL | 10-39 | 16683-39 | Rear cylinder head (marked 4.6) | 1940 to 1946--WLD, 1947 to 1950 | 10-40M | 16695-40 | Rear cylinder head, aluminum | 1940 to 1943--WLA & WLC; Some 1945 & 1946--WL | 1002-32 | 65210-32 | Muffler and all fittings | 1932 to 1940--solo | 1002-32A | 65212-32 | Muffler and all fittings | 1932 to 1940--Servi-Cars | 1002-41 | Muffler and all fittings | 1941 to 1949--solo | 1002-41A | Muffler and all fittings (black) | 1941 to 1950--Servi-Cars | 1002-50 | 65211-50 | Muffler and all fittings (chrome) | 1950--solo | 1002-50A | 65210-50 | Muffler and all fittings (black) | 1950--solo | 1006-35 | 65452-35 | Front exhaust pipe | 1937 to 1940 | 1006-41 | Front exhaust pipe | 1941 to 1950 | 1007-32 | 65490-32 | Rear exhaust pipe | 1932 to 1940--Servi-Cars | 1007-35 | Rear exhaust pipe | 1935 to 1940--solo | 1007-41 | 65490-41 | Rear exhaust pipe | 1941 to 1950 | 1035-32A | Right side exit muffler | Servi-car 1932-1937 | 1035-41 | Muffler rear end cpt. less exhaust pipes | 1941 to 1949--solo | 1035-50 | 65227-50 | Muffler rear end cpt., less exhaust pipes (chrome) | 1950--solo | 1035-50A | 65278-50 | Muffler rear end cpt., less exhaust pipes (black) | 1950--solo | 1037-50 | 65275-50 | Muffler pipe clamp | 1950 | 1038-36 | 65278-36 | Rear end front clamp | Later 1936 to 1950--solo | 1038-38 | 65284-38 | Rear end front clamp | 1939 to 1950--Servi-Cars | 1038-38A | 65282-38 | Front clamp support strap | 1938 to 1949--Servi-Cars | 1039-32 | 2834 | Front bracket bolt | 1932 to 1950--solo | 1044-35 | 65260-35 | Rear muffler outlet | 1938 to 1949--solo | 1044-38 | 65250-38 | Rear muffler outlet | 1938 to 1950--Servi-Cars | 1061-32A | 65510-32 | Exhaust pipe clamp | 1932 to 1950 | 1064-32A | 65286-32 | Rear hanger | 1932 to 1950--solo | 1064-38 | 65297-38 | Rear hanger strap | 1938 to 1950--Servi-Cars | 1064-38A | 65296-38 | Muffler end clamp | 1938 to 1950--Servi-Cars | 1066-38 | Muffler connection tube | 1938 to 1950--Servi-Cars | 1067-47 | 65518-47 | Exhaust pipe hanger strap | 1947 to 1950--Servi-Cars | 11-36 | 16768-36 | Cylinder head gasket | 1936 to 1950--with iron heads | 11-39 | 16768-39 | Cylinder head gasket | 1939 to 1950--aluminum heads | 1102-36 | 27010-36 | Inlet pipe cpt. | 1936 to 1940--W; 1936 to 1950--Servi-Cars |
---|---|---|---|
Part 1102-36 (Inlet pipe cpt.) consists of: | |||
1107-36: Inlet pipe only | |||
1112-32: Inlet nipple (2) | |||
1115-32: Inlet packing nut (2) | |||
1118-30A: Inlet packing bushing | |||
1121-29: Inlet pipe gasket | 1102-36A | 27011-36 | Inlet pipe cpt. | 1936 to 1950--WL; 1940 to 1943--WLA & WLC |
Part 1102-36A (Inlet pipe cpt.) consists of: | |||
0259: 5/16" x 9/16" x 1/16" lock washer | |||
1107-36A: Inlet pipe only | |||
1112-32: Inlet nipple (2) | |||
1115-32: Inlet packing nut (2) | |||
1118-30A: Inlet packing bushing | |||
1121-39: Inlet pipe gasket | |||
1123-39: Carburetor fastening bolt | 1102-40 | 27011-40 | Inlet pipe cpt. | 1940 to 1946--WLD |
Part 1102-40 (Inlet pipe cpt.) consists of: | |||
1107-40: Inlet pipe only | |||
1109-41: Inlet pipe extension | |||
1112-32A: Inlet pipe nipple rivet | |||
1112-36: Inlet nipple | |||
1115-30: Inlet packing nut | |||
1118-30: Inlet packing bushing | |||
1121-21: Inlet pipe gasket | |||
1121-39: Inlet pipe gasket | 1107-36 | 27020-36 | Inlet pipe only | 1936 to 1940--W; 1936 to 1950--Servi-Cars | 1107-36A | 27024-36 | Inlet pipe only | 1936 to 1950--WL; 1940 to 1943--WLA & WLC | 1107-40 | 27024-40 | Inlet pipe only | 1940 to 1946--WLD | 1109-41 | 27034-41 | Inlet pipe extension | 1940 to 1946--WLD | 1111-36 | 27432-36 | Carburetor support | 1936 to 1950 | 1112-32 | 27038-32 | Inlet nipple (2) | 1932 to 1950--except 1940 to 1946--WLD | 1112-32A | 27045-32 | Inlet pipe nipple rivet | 1940 to 1946--WLD | 1112-36 | 27039-36 | Inlet nipple | 1940 to 1946--WLD | 11126-38 | 67004-38 | Speedometer head 120 Mile, with odometer | 1937 to 1946 | 11126-47 | 67004-47 | Speedometer head 120.Mile, with odometer | 1947 to 1950 | 11128-38 | 67005-38 | Speedometer head 195 Kilometer, with odometer | 1937 to 1946 | 11128-47B | 67005-47 | Speedometer head 195 Kilometer, with odometer | 1947 to 1950 | 11132-37 | 67025-37 | Speedometer cable assembly with core | 1937 to 1950--Solo | 11132-38 | 67028-38 | Speedometer cable assembly with core | 1938 to 1950--Servi-cars | 11134-37 | 67055-55 | Drive cable (core) | 1937 to 1940--Solo | 11134-38 | 67056-38 | Drive cable (core) | 1938 to 1940--Servi-cars | 11134-41 | 67057-41 | Drive cable (core) | 1941 to 1950 | 11136-37 | 67074-37 | Speedometer cable clip | 1937 to 1950 | 11136-41 | 67076-41 | Speedometer cable bracket | 1941 to 1950--Solo | 11138-37 | 67129-37 | Speedometer drive unit cpt. | 1937 to 1950--Solo | 11138-38 | 67131-38 | Speedometer drive unit cpt. | 1938 to 1950--Servi-cars | 11139-37 | 67080-37 | Drive unit retainer | 1937 to 1950--Solo | 11144-37 | 67130-37 | Drive gear and shaft | 1937 to 1950--Solo | 11144-38 | 67134-38 | Drive gear and shaft | 1938 to 1950--Servi-cars | 11145-37A | 67155-37 | Speedometer drive gear, on brake shell | 1937 to 1950--Solo | 11145-38 | 67156-38 | Speedometer drive gear (on axle) | 1938 to 1950--Servi-cars | 11146-36 | 67136-36 | Drive unit housing | 1938 to 1950--Servi-cars | 11148-36 | 67137-36 | Housing washer | 1938 to 1950--Servi-cars | 1115-30 | 27050-30 | Inlet packing nut | 1940 to 1946--WLD | 1115-32 | 27051-32 | Inlet packing nut (2) | 1932 to 1950--except 1940 to 1946--WLD | 11150-36 | 67138-36 | Housing collar | 1938 to 1950--Servi-cars | 11150-37 | 67139-37 | Housing collar | 1937 to 1950--Solo | 1118-30 | 27057-30 | Inlet packing bushing | 1940 to 1946--WLD | 1118-30A | 27058-30 | Inlet packing bushing | 1936 to 1940--W; 1936 to 1950--Servi-Cars; 1940 to 1943--WLA & WLC | 1121-21 | 27410-21 | Inlet pipe gasket | 1936 to 1950--with iron heads | 1121-29 | 27410-29 | Inlet pipe gasket | 1936 to 1950--with iron heads | 1121-39 | 27410-39 | Inlet pipe gasket | 1936 to 1950--with iron heads, 1940 to 1950--with aluminum heads | 11225-31 | 91128-31 | Front wheel siren complete | 1937 to 1950 | 1123-29 | 3754 | Carburetor fastening bolt, 1" carburetor (3) | 1929 to 1940--R & W; 1932 to 1950--Servi-Cars | 1123-30 | 27421-30 | Carburetor fastening bolt, 1-1/4" carburetor,(3) | 1930 to 1941--RL, WL & WLD; 1940--WLA | 1123-39 | 27422-39 | Carburetor fastening bolt | 1936 to 1950--WL; 1940 to 1943--WLA & WLC | 1123-41 | 27423-41 | Carburetor fastening bolt (3) | 1941 and early 1942--WLA, WLC | 11235-36 | 53000-36 | Tandem complete | 1937 to 1950 | 11240-29D | 52501-29 | Buddy seat complete - De Luxe | 1933 to 1950 | 11240-33 | Set of buddy seat fittings with footboard extensions | 1933 to 1950 | 11240-33A | 52510-33 | Set of buddy seat fittings | 1933 to 1950 | 11241-29 | 52652-29 | Foot rest, assembly | 1929 to 1950 | 11250-36 | 54000-36 | Ride control cpt. | 1940 to 1945 | 11294-X | Winter windshield cpt. less legshields | 1937 to 1950 | 11295-38 | 58009-38 | Winter windshield cpt. with legshields | 1938 to 1950 | 11296-38 | 58501-38 | Set of legshields cpt. with fittings | 1938 to 1950 | 11298-30 | Apron frame | 1930 to 1940 | 11298-36 | Window support with rubber | 1937 to 1940 | 11298-36A | Support set screws | 1937 to 1940 | 11299-36 | Frame only, sport shield | 1937 to 1940 | 11299-36A | Set of two sport shield extensions | 1937 to 1940 | 11299-41 | 58012-41 | Frame only, sport shield | 1941 to early 1947 | 11299-41A | 58011-41 | Apron frame | 1941 to 1950 | 11300-30 | 11300-30 | Window only | 1930 to 1940 | 11300-30P | 11300-30P | Window only - extra heavy | 1930 to 1940 | 11300-36 | 11300-36 | Window, sport shield | 1937 to 1940 | 11300-36P | 11300-36P | Window, sport shield, heavy (.60") | 1937 to 1940 | 11300-41A | 58024-41 | Window only | 1941 to 1950 | 11300-41B | 58020-41 | Window less molding | 1941 to 1946 | 11300-47 | 58020-47 | Window less molding | 1947 and 1948 | 11301-31 | 11301-31 | Thumb .screw | 1931-1940 | 11301-31A | 11301-31A | Thumb screw clamp | 1931 to 1940 | 11302-30 | 58187-30 | Handlebar clamps | 1930 to 1950 | 11302-30A | 58185-30 | Set of two clamps with eyebolts cpt. | 1930 to 1950 | 11302-41 | 58184-41 | Set of handlebar clamps with fittings | 1941 to 1948 | 11303-30 | 58191-30 | Bracket eye bolt | 1930 to 1950 | 11304-42A | 58046-42 | Window support clips | 1941 to 1947 | 11305-30 | 58194-30 | Bracket eye bolt spacer | 1930 to 1950 | 11305-36 | 58151-36 | Fork spring apron guard | 1940 | 11305-41 | 58150-41 | Fork spring apron guard | 1941 to 1950 | 11305-47 | 58186-47 | Handlebar clamp spacer | 1941 to 1948 | 11306-30 | 11306-30 | Apron and springs | 1931 to 1940 | 11306-36A | Apron | 1937 to 1940 | 11306-41 | 58122-41 | Apron | 1941 to early 1947 | 11306-41A | 58123-41 | Apron only | 1941 to 1950 | 11306-47 | 58122-47 | Apron | Later 1947 and 1948 | 11307-31 | 58143-31 | Apron spring | 1931 to 1950 | 11307-39 | 58507-39 | Left legshield only | 1939 to 1950 | 11307-41 | 9982 | Apron coil clip | 1941 to 1948 | 11308-30 | 58527-30 | Right legshield only | 1937 to 1950 | 11311-32A | 58552-32 | Legshield bracket | 1932 to 1950 | 11312-30 | 58559-30 | Bracket clamp | 1930 to 1950 | 11314-30 | 58566-30 | Legshield flap strip, right side | 1930 to 1950 | 11314-38 | 58570-38 | Legshield flap strip, left side | 1938 to 1950 | 11315-30 | Rubber flap, right | 1930 to 1950 | 11315-38 | 58577-38 | Rubber flap, left | 1930 to 1950 | 11316-41A | Window molding clips | 1941 | 11317-30 | 58585-30 | Lower bracket | 1930 to 1950 | 11318-36 | 88950-36 | Window spring clip, long | 1937 to 1940 | 11318-36A | Apron clip, short | 1937 to 1940 | 11319-41 | 58208-41 | Windshield lower molding | 1941 to early 1947 | 11319-41A | 58220-41 | Windshield lower molding retainer | 1941 to 1947 | 11319-41B | 58221-41 | Molding retainer | 1941 to 1950 | 11319-41C | 58210-41 | Windshield molding | 1941 to 1950 | 11319-41D | 58225-41 | Windshield tee nut | 1941 to 1950 | 11319-41E | 1658 | Windshield molding screw (7/16") | 1941 to early 1947 | 11319-41F | 1666 | Windshield molding screw | 1941 to 1948 | 11319-47 | 58209-47 | Windshield molding | Later 1947 and 1948 | 11319-47A | 58227-47 | Windshield molding screw | Later 1947 and 1948 | 11319-47B | 7639 | Windshield acorn nut | Later 1947 and 1948 | 11320-X | 58760-36 | Lap cover complete | 1937 to 1950 | 11321-41 | 58766-41 | Lap apron clamp | 1937 to 1950 | 11322-41 | 58768-41 | Lap apron fastener | 1937 to 1950 | 1133-30 | 27120-30 | Linkert carburetor, 1" with 7/8" venturi | 1937 to 1950--W & Servi-Cars | 11331-32A | 50002-32 | Jiffy stand complete | 1932 to 1950 | 1134-37 | 27122-37 | Linkert carburetor, 1-1/4" with 1-1/16" venturi | 1937 to 1950--except W & Servi-Cars | 1135-36 | 27132-36 | Carburetor overhaul kit (for 1-1/4" carburetor) | 1937 to 1950--45" model WL, WLA, WLC, WLD (aluminum heads only) |
Part 1135-36 (Carburetor overhaul kit (for 1-1/4" carburetor)) consists of: | |||
010: 6-32 N.C. x 1/4" fillister head screw | |||
1121-39: Inlet pipe gasket | |||
1196-11: Float lever pin | |||
1243-24: Throttle shaft (1-1/4" carburetor) | |||
1245-24: Throttle shaft bushing | |||
1247-32: Throttle shaft spring | |||
1257-33: Nozzle retainer spring | |||
1269-28: Bowl lock nut gasket | |||
1271-33: Carburetor float | |||
1273-33A: Carburetor float valve and seat | |||
1276-36: Bowl cover gasket | |||
1285-33: Inlet nipple washer | |||
1296-26: Friction spring | |||
1297-26: Friction ball | 1135-36A | 27133-36 | Carburetor overhaul kit (for 1" carburetor) | 1937 to 1950--45" model W & Servi-Cars |
Part 1135-36A (Carburetor overhaul kit (for 1" carburetor)) consists of: | |||
010: 6-32 N.C. x 1/4" fillister head screw | |||
1121-29: Inlet pipe gasket | |||
1196-11: Float lever pin | |||
1242-26: Throttle shaft (1" carburetor) | |||
1245-24: Throttle shaft bushing | |||
1247-32: Throttle shaft spring | |||
1247-34: Throttle disc | |||
1257-33: Nozzle retainer spring | |||
1269-28: Bowl lock nut gasket | |||
1271-33: Carburetor float | |||
1273-33A: Carburetor float valve and seat | |||
1285-33: Inlet nipple washer | |||
1296-26: Friction spring | |||
1297-26: Friction ball | 11359-XA | 56581-26 | Handlebar crossbar clamp | 1938 to 1950 | 11365-47 | 69135-47 | Horn bracket bolt insulator | 1947 to 1950 | 11366-38 | 68650-38 | DeLuxe spotlight cpt. clear lens | 1938 to 1950 | 11366-38F | 68652-38 | DeLuxe spotlight cpt. fog lens | 1938 to 1950 | 11367-38 | 68653-38 | DeLuxe spotlight, red lens | 1938 to 1950 | 11368-38 | 68599-38 | Set of DeLuxe spotlights cpt. with cross bar and toggle switch | 1938 to 1950 | 11368-38P | 68600-38 | Set of pursuit lights with cross bar and toggle switch | 1938 to 1950 | 11368-46 | 68600-46 | Set of DeLuxe spotlights cpt. with chrome plated spotlight bar and handlebar swi | 1938 to 1950 | 11368-46A | 68601-46 | Set of pursuit lights with chrome plated spotlight bar | 1938 to 1950 | 11369-46 | 68615-46 | Chrome plated spotlight bar and fittings | 1938 to 1950 | 11370-29 | 70060-29 | Spotlight handlebar switch and wire | 1938 to 1950 | 11371-38 | 68660-38 | Clear lens | 1938 to 1950 | 11371-38F | 68661-38 | Fog lens | 1938 to 1950 | 11372-38 | 68662-38 | Red lens | 1938 to 1950 | 11374-38 | 68668-38 | Door or bezel | 1938 to 1950 | 11375-38 | 68672-38 | Tail lamp door screw | 1947 to 1950 | 11376-38 | 68673-38 | Lens gasket | 1938 to 1950 | 11378-38 | 68676-38 | Reflector | 1938 to first 1949 | 11378-49 | 68676-49 | Reflector | Later 1949 and 1950 | 11380-38 | 68679-38 | Bulb socket cpt. | 1938 to first 1949 | 11380-49 | 68679-49 | Bulb socket cpt. | Later 1949 and 1950 | 11381-49 | 68715-49 | 32-CP SC bulb, prefocused | Later 1949 and 1950 | 11382-38 | 68683-38 | Focus spring | 1938 to 1950 | 11384-38 | 68684-38 | Focus screw | 1938 to 1950 | 11386-38 | 68686-38 | Toggle switch assembly | 1938 to 1950 | 11390-38 | 68692-38 | Swivel | 1938 to 1950 | 11392-38 | 68693-38 | Swivel steel washer | 1938 to 1950 | 11393-38 | 68694-38 | Swivel fibre washer | 1938 to 1950 | 11394-38 | 68695-38 | Swivel nut | 1938 to 1950 | 11395-38 | 68696-38 | Swivel bolt | 1938 to 1950 | 11396-38 | 68702-38 | Clamp half | 1938 to 1950 | 11397-38 | 68707-38 | Clamp screw | 1938 to 1950 | 11400-34 | 68450-34 | Front fender lamp with wiring | 1934 to 1949 | 11401-34 | 68451-34 | Front fender lamp only | 1934 to 1949 | 1152-11 | 27350-11 | Low speed needle valve adjusting screw | 1933 to 1950--45" Model W & Servi-Cars | 1153-11 | 27351-11 | Low speed needle valve lock screw | 1933 to 1950--45" Model W & Servi-Cars | 1154-11 | 27349-11 | Low speed needle valve lock spring | 1933 to 1950--45" Model W & Servi-Cars | 1196-11 | 27383-11 | Float lever pin | 1937 to 1950--45" model W & Servi-Cars | 1197-16 | 27384-16 | Float lever pin bearing screw | 1933 to 1950 | 1226-33 | 27200-33 | Carburetor body only | 1933 to 1950--1-1/4" | 1226-33A | 27201-33 | Carburetor body only | 1933 to 1950--1" | 1231-33 | 27215-33 | Air intake shaft | 1933 to 1950 | 1231-46 | 27216-46 | Carburetor air intake shaft | 1946 to 1948 | 1231-48 | 27217-48 | Carburetor air intake shaft | 1949 and 1950 | 1232-24 | 27225-24 | Air intake disc | 1930 to 1950 | 1233-33 | 27228-33 | Air intake lever | 1933 to 1950--45" except 1941 to 1943--WLA & WLC | 1233-33A | 27235-33 | Air intake lever | 1933 to 1950--45" (use with air cleaner)--1940--WLA | 1233-41M | 27243-41 | Air intake lever | 1941 to 1943--45" model WLA & WLC (use with oil bath air cleaner) | 1233-46 | 27250-46 | Carburetor choke lever | 1946 to 1950 | 1234-24 | 27251-24 | Air intake lever screw | 1933 to 1950 | 1238-37 | 27252-37 | Throttle lever | 1935 to 1948 | 1242-26 | 27275-26 | Throttle shaft (1" carburetor) | 1936 to 1950--45" model W & Servi-Cars | 1243-24 | 27275-24 | Throttle shaft (1-1/4" carburetor) | 1930 to 1950--45" except W & Servi-Cars | 1244-24 | 27280-24 | Throttle disc | 1937 to 1950--45" model WL, WLA, WLC, WLD (aluminum heads only) | 1245-24 | 27290-24 | Throttle shaft bushing | 1937 to 1950--45" model W & Servi-Cars | 1247-32 | 27291-32 | Throttle shaft spring | 1937 to 1950--45" model W & Servi-Cars | 1247-34 | 27280-34 | Throttle disc | 1937 to 1950--45" model W & Servi-Cars | 1248-40M | 27304-40 | High speed needle valve lock screw | 1940 to 1943--45" model WLA & WLC | 1249-38D | Fixed jet No. 4 | 1940--45" model WLA | 1249-41 | 27318-41 | Fixed jet .052" hole | 1941 to 1943--WLA & WLC | 1251-33 | 27325-33 | Idle passage plug | 1933 to 1950 | 1254-27 | 27297-27 | High speed needle valve (1-1/4" carburetor) | 1937 to 1950--45" model WL & WLD | 1254-30 | 27297-30 | High speed needle valve (1" carburetor) | 1937 to 1950--45" model W & Servi-Cars | 1254-40M | 27298-40 | High speed needle valve | 1940 to 1943--45" model WLA & WLC. | 1257-33 | 27330-33 | Nozzle retainer spring | 1937 to 1950--45" model W & Servi-Cars | 1258-33 | 27331-33 | Main nozzle | 1933 to 1950 | 1261-27 | 27336-27 | Low speed needle valve only | 1930 to 1950 | 1261-27A | 27337-27 | Low speed needle valve cpt. (1-1/4" carburetor) | 1930 to 1950 |
Part 1261-27A (Low speed needle valve cpt. (1-1/4" carburetor)) consists of: | |||
1152-11: Low speed needle valve adjusting screw | |||
1153-11: Low speed needle valve lock screw | |||
1154-11: Low speed needle valve lock spring | |||
1261-27: Low speed needle valve only | 1261-33 | 27339-33 | Low speed needle valve only | 1933 to 1950--45" Model W & Servi-Cars | 1261-33A | 27340-33 | Low speed needle valve cpt. (1" carburetor) | 1933 to 1950--45" Model W & Servi-Cars |
Part 1261-33A (Low speed needle valve cpt. (1" carburetor)) consists of: | |||
1152-11: Low speed needle valve adjusting screw | |||
1153-11: Low speed needle valve lock screw | |||
1154-11: Low speed needle valve lock spring | |||
1261-33: Low speed needle valve only | 1262-27 | 27345-27 | Spring collar | 1927 to 1950 | 1263-24 | 27327-24 | Idle passage screw (3) | Later 1933 to 1950 | 1264-27 | 27349-27 | Needle valve spring | 1933 to 1950 | 1265-29A | 27360-29 | 7/8" venturi (1" carburetor) | 1937 to 1950--model W & Servi-Cars | 1265-30 | 27361-30 | 1" venturi (1-1/4" carburetor) | 1930 to 1950--45" except W & Servi-Cars | 1265-30A | 27362-30 | 1-1/16" venturi (1-1/4" carburetor) | 1930 to 1950--45" except W & Servi-Cars; 1940 & early 1941--WLA | 1265-41M | 27364-41 | 15/16" venturi (1-1/4" carburetor) | Later 1941 to 1943--45" model WLA & WLC | 1267-24 | 27370-24 | Bowl assembly | 1929 to 1950 | 1267-33 | 27370-33 | Bowl only | 1933 to 1950 | 1268-29 | 27375-29 | Bowl lock nut | 1930 to 1950 | 1269-28 | 27376-28 | Bowl lock nut gasket | 1936 to 1950--with iron heads, 1940 to 1950--with aluminum heads | 1269-39 | 27377-39 | Bowl drain screw with washer | 1939 to 1950 | 1271-33 | 27380-33 | Carburetor float | 1937 to 1950--45" model W & Servi-Cars | 1272-33 | 27381-33 | Float lever | 1933 to 1950 | 1273-33A | 27382-33 | Carburetor float valve and seat | 1937 to 1950--45" model W & Servi-Cars | 1275-33 | 27390-33 | Bowl valve cover cap | 1933 to 1950 | 1276-36 | 27391-36 | Bowl cover gasket | 1937 to 1950--45" model WL, WLA, WLC, WLD (aluminum heads only) | 1284-33 | 27401-33 | Fuel inlet nipple | 1933 to 1950 | 1285-33 | 27402-33 | Inlet nipple washer | 1937 to 1950--45" model W & Servi-Cars | 1292-27 | 27395-27 | Needle valve lever (1-1/4") carburetor) | 1933 to 1950--45" except W & Servi-Cars | 1292-30 | 27396-30 | Needle valve lever (1" carburetor) | 1936 to 1950--45" model W & Servi-Cars | 1293-27 | 27397-27 | Needle valve lever screw | 1933 to 1950 | 1296-26 | 27405-26 | Friction spring | 1937 to 1950--45" model W & Servi-Cars | 1297-26 | 27406-26 | Friction ball | 1937 to 1950--45" model W & Servi-Cars | 13000-39 | Complete seat & bumper assembly | 1939 to 1941--G & GA Servi-Cars | 13000-39A | 84921-39 | Complete seat & hand rail assembly less bumper | 1939 to 1941--G & GA Servi-Cars | 13000-42 | 84921-42 | Complete seat & hand rail assembly less bumper | 1942 to 1950--Servi-Cars | 13000-42A | 84920-42 | Complete seat & bumper assembly | 1942 to 1950--Servi-Cars | 13005-X | 84900-39 | Complete bumper assembly | 1932 to 1950--Servi-Cars | 13020-35 | 49035-35 | Front safety guard - black | 1932 to 1950 | 13020-35C | 49036-35 | Front safety guard - chrome | 1932 to 1950 | 13030-29 | 49150-29 | Rear safety guard - black | 1930 to 1950 | 13030-29C | 49151-29 | Rear safety guard - chrome | 1930 to 1950 | 13051-38 | 49177-38 | U-bolt with nut & lock washer | 1930 to 1950 | 13051-X | Safety guard U-bolt with nut & lock washer | 1932 to 1950 | 13052-38 | Rear safety guard spacer | 1930 to 1941 | 13200-32 | 50045-32 | Leg bracket | 1932 to 1950 | 13201-30A | 50060-30 | Leg | 1930 to 1950 | 13202-30 | 50012-30 | Spring | 1930 to 1950 | 13203-30A | 50035-30 | Spring plate | 1930 to 1950 | 13205-30 | 50092-30 | Leg bushing | 1930 to 1950 | 13300-40B | 52515-40 | Buddy seat top | 1938 to 1950 | 13302-34 | 53010-34 | Saddle yoke | 1934 to 1950 | 13302-34A | 53015-34 | Yoke clip | 1934 to 1950 | 13304-33 | 52541-33 | Seat bar clamp | 1933 to 1950 | 13304-35 | 53017-35 | Saddle spring, standard | 1934 to 1950 | 13306-33C | 52547-33 | Handle | 1933 to 1950 | 13310-30 | 53055-30 | Front seat connection | 1934 to 1950 | 13310-33 | 52595-33 | Auxiliary spring clip, heavy | 1933 to 1950 | 13312-30 | 53060-30 | Connection stud | 1934 to 1950 | 13312-33 | Auxiliary spring clip, light | 1933 to 1950 | 13313-30 | 53062-30 | Connection stud spacer | 1934 to 1950 | 13313-38 | 52605-38 | Buddy seat bracket spacer | 1938 to 1950 | 13314-30 | 53033-30 | Handle rod | 1934 to 1950 | 13314-33 | 5674 | Auxiliary spring clip bolt, short | 1933 to 1950 | 13314-33A | 5677 | Auxiliary spring clip bolt, long | 1933 to 1950 | 13316-30 | 53041-30 | Handle grip ferrule | 1934 to 1950 | 13316-44 | 53038-44 | Tandem grip spacer | 1934 to 1946 | 13317-30 | 53026-30 | Handle bracket assembly | 1934 to 1950 | 13318-30A | 53070-30 | Mudguard reinforcement plate | 1934 to 1950 | 13318-34 | Handle reinforcement | 1934 to 1950 | 13318-34A | 53074-34 | Handle spacer | 1934 to 1950 | 13318-36 | 53078-36 | Handle side bar brace L.H. | 1937 to 1950 | 13319-34A | 53083-34 | Rear brace | 1934 to 1950 | 13319-34B | 6334 | Upper bolt spacer | 1934 to 1950 | 13319-36 | 53079-36 | Handle side bar brace R.H. | 1937 to 1950 | 13320-36 | 53085-36 | Handle side bar brace reinforcement | 1937 to 1950 | 13322-33 | 52575-33 | Auxiliary spring | 1933 to 1950 | 13327-33 | 13327-33 | Auxiliary spring yoke | 1933 to 1940 | 13327-33B | 52562-33 | Spring yoke and clamp assembly cpt. | 1933 to 1950 | 13327-41 | 52565-41 | Auxiliary spring yoke | 1933 to 1950 | 13328-35 | Auxiliary spring shoulder bolt | RL, WL 1935-1940. | 13328-41 | 52590-41 | Auxiliary spring shoulder bolt | 1933 to 1950 | 13330-36A | 52603-36 | Spring mounting stud with fittings | 1937 to 1950 | 13331-33 | Bracket aux. springs | VL 1933-1936. RL, WL 1933-1940. | 13331-41 | 52579-41 | Auxiliary spring clamp | 1933 to 1950 | 13332-25A | 3860 | Oil pump mounting bolt | 1937 to 1950 | 13337-41 | 52584-41 | Auxiliary spring yoke spacer | 1933 to 1950 | 13340-33 | 13340-33 | Yoke hook aux. springs | VL 1933-1936. RL, WL 1933-1940. | 13340-40 | 53091-40 | Footrests | 1940 to 1950 | 13340-40A | 53090-40 | Set of tandem footrests and fittings | 1940 to 1950 | 13340-41 | 52585-41 | Auxiliary spring yoke hook | 1933 to 1950 | 13344-33 | 52560-33 | Set of footboard extensions cpt. | 1933 to 1950 | 13345-33 | 52655-33 | Right footboard footrest | 1933 to 1950 | 13346-33 | 52654-33 | Left footboard footrest | 1933 to 1950 | 13348-33 | 52668-33 | Footrest strap | 1933 to 1950 | 13400-35 | 68457-35 | Lamp cover, 7-1/2" long | 1935 to 1949 | 13401-35 | 68455-35 | Glass lens | 1935 to 1949 | 13402-35 | 68456-35 | Lens cork gasket | 1935 to 1949 | 13402-47 | 68459-47 | Fender lamp gasket | 1947 to 1949 | 13403-35 | 68469-35 | Cover screw, long | 1935 to 1949 | 13404-35 | 68470-35 | Cover screw, short | 1935 to 1949 | 13408-34 | 2586 | Contact terminal screw | 1934 to 1945 | 13409-34 | 68461-34 | Front fender lamp wire cpt. | 1934 to 1945 | 13410-35 | 68471-35 | Fender lamp mtg. bolt, front | 1935 to 1949 | 13411-35 | 68472-35 | Fender lamp mtg. bolt, rear | 1935 to 1949 | 13412-47 | 6185 | Terminal box screw insulating washer | 1948 to 1950 | 13430-33 | 54012-33 | Friction disc cup | 1933 to 1945 | 13431-33 | 54014-33 | Friction disc | 1933 to 1945 | 13435-36 | 54020-36 | Adjusting rod | 1940 to 1945 | 13436-36 | 54030-36 | Rod and bracket stud | 1939 to 1945 | 13437-33 | 54032-33 | Adjusting rod spring washer | 1933 to 1945 | 13438-36 | 54034-36 | Rod plain friction washer | 1939 to 1945 | 13440-33 | 54040-33 | Adjusting wheel | 1933 to 1945 | 13442-33 | 54047-33 | Adjusting wheel spring clip | 1933 to 1945 | 13444-33 | 54049-33 | Adjusting wheel collar | 1933 to 1945 | 13454-33 | 54051-33 | Bracket hushing (rubber) | 1933 to 1945 | 13456-36 | 54061-36 | Side plate | 1940 to 1945 | 13457-36 | 54063-36 | Clamp bracket stud | 1940 to 1946 | 13457-40 | 6417 | Spotlight fork bracket washer | 1938 to 1950 | 13501-33 | 91206-33 | Siren bracket | 1933 to 1950 | 13503-33 | 91204-33 | Bracket bolt, 1" | Later 1933 to 1950 | 13503-33A | 91205-33 | Bracket bolt, 7/8" | Later 1933 to 1950 | 13504-33 | 91203-33 | Bracket bolt spacer | Later 1933 to 1950 | 13505-32 | 91225-32 | Return spring | 1933 to 1950 | 13507-32 | 91143-32 | Fan housing | 1933 to 1950 | 13512-33 | 91160-33 | Fan | Later 1933 to 1950 | 13514-38 | 91180-38 | Fan screen | 1933 to 1950 | 13516-39 | 91162-39 | Fan shaft | Later 1939 to 1950 | 13518-X | 91157-31 | Large bearing | 13519-32 | 91158-32 | Small bearing | 13520-32 | 91164-32 | Bearing spacer sleeve | 13522-X | 91155-31 | Bearing lock nut | 13523-X | 91156-31 | Lock nut screw | 1931 to 1950 | 13526-40 | 91168-40 | Driving pulley - (right thread) | 1931 to 1950 | 13530-38 | 91185-38 | Streamlined projector | Later 1938 to 1950 | 13531-38 | 91186-38 | Projector screw | Later 1938 to 1950 | 13534-32 | 91298-32 | Hinge adjusting screw | 1933 to 1950 | 13535-32 | 13535-32 | Adjusting screw shakeproof lock washer | 1933 to 1950 | 13536-32 | 91299-32 | Adjusting screw lock nut | 1933 to 1950 | 13548-32 | 91363-32 | Control adjusting screw | 1933 to 1950 | 13550-X | 91365-31 | Adjusting screw lock nut | 1931 to 1950 | 13552-32 | 91364-32 | Control wire fastening screw | 1933 to 1950 | 13556-X | 91355-31 | Control cable complete | 1931 to 1950 | 13558-X | 91358-31 | Control wire with ends | 1931 to 1950 | 13560-X | 91368-31 | Control wire housing | 1931 to 1950 | 14-26 | 16800-26 | Cylinder head stud (2-1/8") | 1932 to 1950--with iron heads | 14-26S | 16801-26 | Cylinder head stud, oversize (7/16) | 1929 to 1950--with Iron heads | 14-29 | 16802-29 | Cylinder head stud (1-15/16") | 1929 to 1950--with iron heads | 14-40A | 16809-40 | Cylinder head bolt (14) (1-3/4") | 1940 to 1946--WLD, 1947 to 1950--WL with aluminum heads | 14-40M | 16811-40 | Cylinder head bolt, short (14) | 1940 to 1943--WLA & WLC; 1945 & 1946--WL with aluminum heads | 14-40MA | 16812-40 | Cylinder head bolt, long (2) | 1940 to 1943--WLA & WLC; 1945 to 1950--WL with aluminum heads | 14-45 | 16813-45 | Front cylinder head bolt (1) | 1942--WLA with long crankcase relief pipe | 14000-45 | 54200-45 | Front fork shock absorber cpt. | 1946 to 1950 | 14001-45 | 54206-45 | Front shock absorber only | 1946 to 1950 | 14002-45 | 54216-45 | Shock absorber rubber bushing | 1946 to 1950 | 14003-45 | 54219-45 | Shock absorber upper stud | 1946 to 1950 | 14004-45 | 54220-45 | Shock absorber lower stud | 1946 to 1950 | 14005-45 | 54224-45 | Lower stud shoulder bolt | 1946 to 1950 | 14006-45 | 54226-45 | Shock absorber upper stud plain washer | 1946 to 1950 | 14006-46 | 54227-46 | Shock absorber upper stud washer | 1946 to 1950 | 14007-45 | 45643-45 | Spring rod bushing | 1946 to 1950 | 14008-45 | 54230-45 | Fork spring ball bushing retainer plate | 1946 to 1950 | 1401-35 | 29002-35 | Air cleaner complete | 1935 to 1950 | 1401-42M | Oil bath air cleaner less fittings | 1940 to 1943--45" model WLA & WLC | 1401-42MC | 29001-42 | Oil bath air cleaner with fittings | 1940 to 1943--45" model WLA & WLC | 1402-35 | Air Cleaner Back Plate | 1402-41 | 29020-41 | Air cleaner back plate | 1941 to 1950 | 1403-35 | Air cleaner cover (5-1/4") | 1930 to 1940--small round type cleaner | 1403-41 | 29030-41 | Air cleaner cover | 1941 to 1950 | 1404-35 | 29037-35 | Air cleaner copper mesh | 1930 to 1940--small round type cleaner | 1404-41 | 29036-41 | Air cleaner copper mesh with support | 1941 to 1950 | 1405-37 | Air cleaner spring | 1937 to 1940 | 1405-41 | 29040-41 | Air cleaner spring | 1941 to 1950 | 1406-32 | 29150-32 | Air intake complete | 1936 to 1950 | 1406-41M | 29070-41 | Air cleaner carburetor connection | 1940 to 1943--45" model WLA & WLC | 1408-36 | 29155-36 | Intake or air cleaner mounting screw lock ring | 1937 to 1950 | 1408-41M | 4614 | Air cleaner mounting bolt (2) | 1940 to 1943--45" model WLA & WLC | 1409-36 | 3625 | Air intake and cleaner mounting screw (4) | 1937 to 1950 | 1409-41M | 29080-41 | Carburetor connection screw (4) | 1940 to 1943--45" model WLA & WLC | 1411-36A | 29161-36 | Air intake cover | 1936 to 1950 | 1412-36A | 29172-36 | Air intake back | 1936 to 1950 | 1413-36 | 29182-36 | Cover retaining screw (2) | 1937 to 1950 | 1413-41M | 29085-41 | Connecting hose clamp (2) | 1940 to 1943--45" model WLA & WLC | 1414-36 | 7604 | Retaining screw nut (2) | 1937 to 1950 | 1414-42 | 29094-42 | Air cleaner strainer | 1942 & 1943--45" model WLA & WLC | 1415-41M | 29096-41 | Air cleaner cover | 1940 & 1941--45" model WLA | 1415-42M | 29097-42 | Baffle plate | 1942 & 1943--45" model WLA & WLC | 1416-42 | 29098-42 | Baffle plate screw | 1942 & 1943--45" model WLA & WLC | 1417-42 | 29099-42 | Baffle plate screw washer | 1942 & 1943--45" model WLA & WLC | 14200-46 | Carburetor choke control cpt. | 1939 to 1950 | 1421-41M | 29109-41 | Bottom pan clamp | 1940 & 1941--45" model WLA; 1942--WLC | 1421-42 | 29100-42 | Oil cup latch (2) | 1942 & 1943--45" model WLA & WLC | 14215-46 | 29452-46 | Choke control coil | 1946 to 1950 | 1422-42 | 29101-42 | Oil cup latch rivet (2) | 1942 & 1943--45" model WLA & WLC | 14220-46 | 29453-46 | Choke control coil holder | 1946 | 14225-46 | 29455-46 | Choke control bracket | 1946 to 1950 | 1423-41M | 29110-41 | Bottom pan clamp screw | 1940 & 1941--45" model WLA; 1942--WLC | 1423-42 | 29102-42 | Oil cup latch spring clip (2) | 1942 & 1943--45" model WLA & WLC | 1425-41M | Oil cup | 1940 & 1941--45" model WLA | 1425-42M | 29105-42 | Oil cup | 1942--45" model WLC | 1425-42MA | 29103-42 | Oil cup | 1942 & 1943--45" model WLA & WLC | 14250-46 | 29460-46 | Choke control wire | 1946 to 1950 | 1426-42 | 29095-42 | Air cleaner gasket | 1942 & 1943--45" model WLA & WLC | 14275-46 | 29465-46 | Choke control knob | 1946 to 1950 | 1429-41M | 29107-41 | Air cleaner joint gasket | 1940 & 1941--45" model WLA; 1942--WLC | 1429-42M | 29108-42 | Oil cup gasket | 1942 & 1943--45" model WLA & WLC | 1430-41M | 29087-41 | Cleaner mounting bracket | 1940 to 1943--45" model WLA & WLC | 1432-41 | 29091-41 | Mounting bracket to frame clamp, rear | 1940 to 1943--45" model WLA & WLC | 1432-41M | 29092-41 | Mounting bracket to frame clamp, front | 1940 to 1943--45" model WLA & WLC | 15-26 | 16820-26 | Cylinder head stud nut, long (12) | 1929 to 1950--iron heads | 15-39 | 16822-39 | Head bolt washer (16) | 1940 to 1950--aluminum heads | 1501-30 | 29975-30 | Generator cpt., less drive gear | 1932 to 1950 | 1503-40 | 30007-40 | Generator overhaul kit | 1932 to 1948 |
Part 1503-40 (Generator overhaul kit) consists of: | |||
010: 6-32 N.C. x 1/4" fillister head screw | |||
0129: 3/8"-24 N.F. x 1/4" x 9/16" hexagon nut | |||
037: 10-32 N.F. x 5/8" fillister head screw | |||
1506-32: Frame screw (2) | |||
1527-30: Generator gasket | |||
1642-29: Armature bakelite washer | |||
1642-30: Bearing housing gasket | |||
1644-18: Armature bearing, small | |||
1644-30: Armature bearing, large | |||
1647-31C: Drive end felt washer | |||
1669-32A: Brush set | |||
1697-30: Commutator cover gasket | |||
634-32: Generator gear pin | 1504-32 | Frame | 1932 to 1948 | 1504-49 | Frame | 1949 and 1950 | 1505-32 | 30132-32 | Right frame end | 1932 to 1950 | 1506-32 | 30012-32 | Frame screw (2) | 1932 to 1950 | 1507-32 | 30202-32 | Shunt field coil | 1932 to 1950 | 1508-32 | 30206-32 | Regulating field coil | 1932 to 1950 | 1511-30 | 30271-30 | Pole piece (2) | 1932 to 1950 | 1512-18 | 30280-18 | Pole piece screw (4) | 1918 to 1950 | 1520-24 | 9900 | Field coil wire terminal | 1924 to 1950 | 1520-39 | 9907 | Large terminal | 1938 to 1947 | 1520-48 | 9901 | Wire terminal | 1948 to 1950 | 1520-48A | 9902 | Wire terminal | 1948 to 1950 | 1520-48B | 9903 | Wire terminal | 1948 to 1950 | 1520-48C | 9904 | Wire terminal | 1948 to 1950 | 1520-48D | 9905 | Wire terminal | 1948 to 1950 | 1520-48E | 9906 | Wire terminal | 1948 to 1950 | 1523-26 | 1240 | Connecting hose clamp screw (2) | 1940 to 1943--45" model WLA & WLC | 1523-26A | Set of frame terminal screws and fittings | 1936 to 1948 | 1523-32 | 2349 | Generator fastening screw (2) | 1932 to 1950 | 1523-36 | 30011-36 | Connecting hose clamp screw | 1940 to 1943--45"model WLA & WLC | 1527-30 | 30143-30 | Generator gasket | 1936 to 1950--with iron heads, 1940 to 1950--with aluminum heads | 1528-30 | 30025-30 | Generator strap | 1932 to 1950 | 1529-30 | 30029-30 | Generator strap washer | 1932 to 1950 | 1540-37 | Timer shaft and housing | 1937 to 1950 | 1540-37A | Timer shaft housing | Later 1937 to 1950 | 1541-37 | Timer base gasket | 1936 to 1950--with iron heads, 1940 to 1950--with aluminum heads | 1542-36 | Timer housing bushing (2) | 1937 to 1950 | 1546-37 | Timer shaft and cam | 1937 to 1950 | 1547-36 | Timer shaft gear with pin | 1937 to 1950 | 1548-36 | 255 | Timer shaft gear pin | 1937 to 1950 | 1565-37 | Circuit breaker (timer base) assembly | 1937 to 1946 | 1565-47 | Circuit breaker (timer base) assembly | 1947 to 1950 | 1566-37 | Circuit breaker base | 1937 to 1946 | 1566-47 | Circuit breaker base | 1947 & 1948 | 1566-49 | Circuit breaker base | 1949 & 1950 | 1567-36 | Circuit breaker cover | 1937 to 1950 | 1567-36C | Circuit breaker cover (chrome) | 1937 to 1950 | 1568-36 | Breaker cover retainer | 1937 to 1950 | 1568-36A | Breaker base retainer | 1937 to 1950 | 1569-30 | Contact plate and point | 1930 to 1948 | 1569-30A | Set of breaker points | 1930 to 1948 |
Part 1569-30A (Set of breaker points) consists of: | |||
018: 8-32 N.C. x 1/4" round head screw | |||
1569-30: Contact plate and point | |||
1570-30: Contact plate ring washer | |||
1573-30: Breaker lever | |||
1574-30: Breaker lever spring | 1570-30 | Contact plate ring washer | 1930 to 1948 | 1571-30 | Breaker point stud assembly | 1930 to 1948 | 1573-30 | Breaker lever | 1930 to 1948 | 1574-30 | Breaker lever spring | 1930 to 1948 | 1578-47 | Circuit breaker adjusting screw | 1947 to 1950 | 1579-47 | Circuit breaker adjusting screw plate | 1947 to 1950 | 1595-30 | Set of spark plug cables | 1930 to 1950 |
Part 1595-30 (Set of spark plug cables) consists of: | |||
1596-30: Spark plug cable, long | |||
1597-30: Spark plug cable, short | |||
1599-27: Washer | 1596-30 | Spark plug cable, long | 1930 to 1950 | 1597-30 | Spark plug cable, short | 1930 to 1950 | 1598-27 | Spark plug terminal (hollow tube) | 1927 to 1950 | 1599-27 | Washer | 1927 to 1950 | 1599-27A | Cable packing nut (2) | 1927 to 1950 | 1602-30 | Spark plug wire clamp | 1939 to 1950--Servi-Cars | 1602-37 | Front Spark plug cable bracket | 1937 to 1950 | 1613-30A | Circuit breaker to coil wire and stud | 1930 to 1950 | 1613-30B | Circuit breaker to coil wire assembly | 1930 to 1950 |
Part 1613-30B (Circuit breaker to coil wire assembly) consists of: | |||
0103: 8-32 N.C. x 1/8" x 5/16" hexagon nut | |||
0201A: 13/64" x 3/8" x 1/32" brass washer | |||
1613-30A: Circuit breaker to coil wire and stud | |||
1615-36A: Circuit breaker wire stud insulator | |||
1618-30: Circuit breaker wire stud fibre washer | 1614-18 | 9913 | Terminal and eyelet | 1918 to 1947 | 1615-36A | Circuit breaker wire stud insulator | 1930 to 1950 | 1615-42M | Circuit breaker wire stud | 1930 to 1948 | 1615-49 | Circuit breaker wire stud | 1949 & 1950 | 1615-49A | Circuit breaker wire stud insulator | 1949 & 1950 | 1617-29 | 6285 | Terminal screw fibre washer | 1936 to 1948 | 1618-30 | 6106 | Circuit breaker wire stud fibre washer | 1930 to 1950 | 1627-36 | Circuit breaker control strap assembly | 1937 to 1946 |
Part 1627-36 (Circuit breaker control strap assembly) consists of: | |||
021: 8-32 N.C. x 3/8" fillister head screw | |||
1630-36: Circuit breaker control strap | |||
1631-36: Circuit breaker lever and strap end | |||
1632-36: Circuit breaker strap end screw | |||
1633-36: Circuit breaker strap pin | |||
1634-36: Circuit breaker lever stud | 1627-37A | Timer control bracket | 1937 to 1946 | 1629-30 | Condenser | 1930 to 1948 | 163-32 | 18070-32 | Inlet valve | 1932 to 1950 | 1630-36 | Circuit breaker control strap | 1937 to 1946 | 1631-36 | Circuit breaker lever and strap end | 1937 to 1946 | 1632-36 | Circuit breaker strap end screw | 1937 to 1946 | 1633-36 | 225 | Circuit breaker strap pin | 1937 to 1946 | 1634-36 | Circuit breaker lever stud | 1937 to 1946 | 1636-32 | Armature with winding | 1932 to 1950* | 1637-46 | 30145-46 | Armature felt washer (oil seal) | 1946 to 1950 | 1638-46 | 30146-46 | Armature felt washer retainer | 1946 to 1950 | 1639-18 | 30890-18 | Armature spacing shim (.018") | 1918 to 1950 | 1641-30A | Inner oil retainer, brush end | 1932 to 1950 | 1641-33 | Outer oil retainer, brush end | Later 1933 to 1950 | 1642-29 | Armature bakelite washer | 1932 to 1948 | 1642-30 | Bearing housing gasket | 1932 to 1948 | 1643-30 | 6551 | Armature end washer (.072") (steel) | 1932 to 1950 | 1644-18 | Armature bearing, small | 1932 to 1948 | 1644-30 | Armature bearing, large | 1932 to 1948 | 1646-31 | Drive end oil deflector | 1932 to 1950 | 1647-29A | Bearing plate spring ring, 1-5/16" diameter | 1930 to 1950 | 1647-31A | 8314 | Drive end felt retainer rivet (4) | 1932 to 1950 | 1647-31B | Drive end spring | 1932 to 1950 | 1647-31C | Drive end felt washer | 1932 to 1948 | 1647-31D | Drive end spring ring | 1932 to 1960 | 1647-31E | Drive end felt washer retainer | 1932 to 1950 | 1647-32 | Brush end bearing housing | 1932 to 1947 | 1647-48 | Brush end bearing housing | 1948 to 1950 | 165-32 | 18080-32 | Exhaust valve | 1932 to 1950 | 1650-18 | 23985-18 | Crank pin key | 1930 to 1950 | 1654-29 | 25860-29 | Timer drive gear key | 1937 to 1950 | 166-32 | Valve guide - standard (4) | 1932 to 1940 | 166-32A | Valve guide - .001" O.S. | 1932 to 1940 | 166-32B | Valve guide - .002" O.S. | 1932 to 1940 | 166-41 | 18176-41 | Valve guide - standard (4) | 1941 to 1950 | 166-41A | 18179-41 | Valve guide - .001" O.S. | 1941 to 1950 | 166-41B | 18180-41 | Valve guide - .002" O.S. | 1941 to 1950 | 1660-32 | Positive brush holder assembly | 1932 to 1950 |
Part 1660-32 (Positive brush holder assembly) consists of: | |||
010: 6-32 N.C. x 1/4" fillister head screw | |||
1661-32: Main brush holder | |||
1663-32: Brush holder insulation | |||
1663-32A: Field coil terminal insulation | |||
1663-32B: Field coil terminal | |||
1664-32: Positive terminal screw | 1660-32A | Negative brush holder assembly | 1932 to 1950 |
Part 1660-32A (Negative brush holder assembly) consists of: | |||
010: 6-32 N.C. x 1/4" fillister head screw | |||
0254: No. 10 x 21/64" x 3/64" lock washer | |||
1661-32: Main brush holder | |||
1667-32: Negative brush holder screw nut | 1661-32 | 30351-32 | Main brush holder | 1932 to 1950 | 1662-32 | 30385-32 | Third brush holder | 1932 to 1950 | 1663-32 | 30365-32 | Brush holder insulation | 1932 to 1950 | 1663-32A | 30228-32 | Field coil terminal insulation | 1932 to 1950 | 1663-32B | 30231-32 | Field coil terminal | 1932 to 1950 | 1664-32 | 30460-32 | Positive terminal screw | 1932 to 1950 | 1664-32A | 30461-32 | Positive terminal screw with fittings | 1932 to 1950 |
Part 1664-32A (Positive terminal screw with fittings) consists of: | |||
0105: 10-32 N.F. x 1/8" x 5/16" hexagon nut (brass) | |||
0354: Terminal screw lock washer | |||
1664-32: Positive terminal screw | |||
1665-32: Terminal screw bushing | |||
1666-32: Terminal insulating washer | 1665-32 | 30463-32 | Terminal screw bushing | 1932 to 1950 | 1666-32 | 6186 | Terminal insulating washer | 1932 to 1950 | 1667-32 | 30367-32 | Negative brush holder screw nut | 1932 to 1950 | 1669-32A | 30425-32 | Brush set | 1932 to 1948 |
Part 1669-32A (Brush set) consists of: | |||
1669-32: Large brush and spring | |||
1671-26: Small brush and spring | 167-38 | 18198-38 | Valve guide oil seal | 1936 to 1950--with iron heads, 1940 to 1950--with aluminum heads | 168-32 | Valve spring (4) | 1932 to 1940 | 168-41 | 18201-41 | Valve spring (4) | 1941 to 1950 | 1693-30 | Field coil wire (5-1/4" black) | 1932 to 1950 | 1693-32 | Field coil wire (6-1/4" black) | 1932 to 1950 | 1696-32 | 30137-32 | Commutator end cover | 1932 to 1950 | 1697-30 | 30138-30 | Commutator cover gasket | 1932 to 1948 | 170-30 | 18220-30 | Valve spring collar (4) | 1932 to 1950 | 172-30 | 18228-30 | Valve key (4) | 1932 to 1950 | 1722-30A | Spark coil and cables | 1930 to 1950 | 1723-29 | Spark coil U-bolt | 1930 to 1947 | 1723-30 | U-bolt | 1932 to 1950 | 1724-29 | U-bolt strap | 1930 to 1947 | 1726-30 | Coil mounting plate screw plate (2) | 1933 to 1947 | 1728-30 | Coil mounting plate | 1933 to 1947 | 1728-48 | Spark coil mounting plate | 1948 to 1950 | 1729-48 | Spark coil mounting plate bolt (2) | 1948 to 1950 | 173-31 | Upper valve spring cover | 1931 to 1950 | 173-31A | 18235-31 | Valve spring cover kit | 1931 to 1950 |
Part 173-31A (Valve spring cover kit) consists of: | |||
167-38: Valve guide oil seal | |||
173-31: Upper valve spring cover | |||
173-41: Upper valve spring cover | |||
174-31: Lower valve spring cover | |||
175-29: Valve cover packing | |||
176-26: Valve cover and guide gasket | 173-41 | 18239-41 | Upper valve spring cover | 1931 to 1950 | 174-31 | 18255-31 | Lower valve spring cover | 1931 to 1950 | 1741-38 | Switch to generator and relay wire | 1938 to 1946 | 1741-47 | Switch to generator and relay wire | 1947 to 1950 | 1742-47 | Ignition wire | 1947 to 1950 | 175-29 | 18260-29 | Valve cover packing | 1936 to 1950--with iron heads, 1940 to 1950--with aluminum heads | 176-26 | 18630-26 | Valve cover and guide gasket | 1936 to 1950--with iron heads, 1940 to 1950--with aluminum heads | 186-10 | Seast post auxiliary spring (2-3/4") | 1931 to 1950 | 2-36A | 16460-36 | Front cylinder with piston assembly | 1936 to 1950--with iron heads | 2-40A | Front cylinder with piston assembly | 1940 to 1946--WLD | 200-29 | 18490-29 | Tappet with screw and nut | 1929 to 1950 | 2001-29 | 40006-29 | Front chain, 100 links | 1929 to 1950--except Servi-cars | 2001-29D | Front chain, 100 links | 1929 to 1950--except Servi-cars | 2001-38 | 40011-38 | Front chain, 96 links | 1938 to 1950--Servi-cars | 2001-38D | 40012-38 | Front chain, 96 links | 1938 to 1950--Servi-cars | 2002-15 | 40028-15 | Rear chain 3/8" x 5/8" (63-3/4") | 1935 to 1950 | 2002-15D | 40029-15 | Rear chain, 3/8" x 5/8" pitch, (63-3/4") | 1935 to 1950 | 2006-15 | 40052-15 | Connecting link (rear chain) | 1915 to 1950 | 2007-15 | 40053-15 | Connecting link (rear chain) | 1929 to 1950 | 2007-29 | 40054-29 | Connecting link,(front chain) | 1929 to 1950 | 2007-29A | 40055-29 | Connecting link (front chain) | 1937 to 1950 | 2008-12 | 40066-12 | Spring clip, rear chain link 5/8" pitch chains | 2008-29 | 40067-29 | Connecting link spring (front chain) | 1929 to 1950 | 2008-29A | 40068-29 | Connecting link spring (front chain) | 1937 to 1950 | 2010-15 | 40076-15 | Roller block, (rear chain) | 1929 to 1950 | 2011-15 | 40077-15 | Roller block (rear chain) | 1929 to 1950 | 2011-29 | 40080-29 | Roller block (front chain) | 1929 to 1950 | 2011-29A | 40079-29 | Roller block (front chain) | 1937 to 1950 | 2012-15 | 40091-15 | Offset repair link, (rear chain) | 1929 to 1950 | 2013-15 | 40092-15 | Offset link (rear chain) | 1929 to 1950 | 2014-15 | 40093-15 | Double repair link, (rear chain) | 1929 to 1950 | 2014-29 | 40096-29 | Double repair link, (front chain) | 1937 to 1950 | 2015-15 | 40094-15 | Double repair link (rear chain) | 1929 to 1950 | 2015-29 | 40097-29 | Double repair link (front chain) | 1929 to 1950 | 2029-29 | 40232-29 | 24 tooth motor sprocket | 1929 to 1950 | 2029-29A | 40240-29 | 32 tooth motor sprocket | 1929 to 1950 | 2030-29A | 40234-29 | 26 tooth motor sprocket | 1929 to 1950 | 2030-29B | 40237-29 | 29 tooth motor sprocket | 1929 to 1950 | 2030-29C | 40225-29 | 17 tooth motor sprocket | 1929 to 1950 | 2030-29D | 40230-29 | 22 tooth motor sprocket | 1929 to 1950 | 2030-29E | 40235-29 | 27 tooth motor sprocket | 1929 to 1950 | 2030-29F | 40238-29 | 30 tooth motor sprocket | 1929 to 1950 | 2031-29B | 40241-29 | 33 tooth motor sprocket | 1929 to 1950 | 2031-35 | 40242-35 | 34 tooth motor sprocket | 1935 to 1950--WLDR (Special) | 2035-33 | 35204-33 | Front sprocket for rear chain (16-tooth) | 1935 to 1940 | 2035-33A | Front sprocket for rear chain (15-tooth) | 1935 to 1940 | 2035-41 | 35204-41 | Front sprocket for rear chain (17-tooth) | 1941 to 1950 | 2039-33A | Clutch sprocket (59 tooth) | 1935 to 1940 | 2039-41A | 37695-41 | Clutch sprocket (with key ring and shell (59 tooth) | 1941 to 1950 | 2043-35 | 41474-35 | Rear wheel sprocket kit | 1935 to 1950--45" except Servi-cars |
Part 2043-35 (Rear wheel sprocket kit) consists of: | |||
2048-30: Rear wheel sprocket dowel pin | |||
4034-35: Rear brake shell splash ring | |||
8496: Rivets | 2048-30 | 41485-30 | Rear wheel sprocket dowel pin | 1935 to 1950--45" except Servi-cars | 2050-12 | 7991 | Motor sprocket nut | 1929 to 1950 | 2076-26A | Starter crank and pedal assembly | 1929 to 1940--45" ,1941 to 1950-45" model Servi-Car only | 2076-29 | Starter crank only | 1929 to 1940--45" ,1941 to 1950--45" Servi-Car only | 2076-41 | Starter-crank only | 1941 to 1950--45" except Servi-Cars | 2076-41A | Starter crank and pedal assembly | 1941 to 1950--45" except Servi-cars | 2078-26 | 4370 | Starter crank clamp bolt with nut and washer | 1929 to 1944--45", except later 1942--45" model WLA, 1932 to 1950 Servi-Cars | 2078-44 | Starter crank clamp bolt | Later 1942-45" model WLA,1944 to 1950--45" | 208-29 | Roller, tappet | 2084-28 | Starter crank spring | 1929 to 1940 | 2084-41 | 33084-41 | Starter crank spring | 1941 to 1950 | 2085-44 | 7800 | Crank bolt nut | 1929 to 1950 | 2086-33 | Starter spring stud | RL, WL, Servi-car 1933-1940. | 2086-41 | 33088-41 | Starter crank spring stud | 1941 to 1950 | 2091-16A | 33175-16 | Starter pedal cpt.(black) (rubber) | 1929 to 1950 | 2091-16C | 33176-16 | Starter pedal cpt. (plastic) red. | 1929 to 1950 | 2091-16D | 33177-16 | Starter pedal cpt. (plastic) - yellow | 1929 to 1950 | 2092-17 | 33182-17 | Pedal rubber (2) | 1929 to 1950 | 2092-45C | 33183-45 | Starter pedal block (red) | Later 1945 to 1950--(plastic pedal) | 2092-45D | 33184-45 | Starter pedal block - (yellow) | Later 1945 to 1950--(plastic pedal) | 2093-17 | 33190-17 | Pedal rubber rod (2) | 1929 to 1950 | 2094-45 | 33195-45 | Starter pedal axle spring | Later 1945 to 1950--(plastic pedal) | 2095-16 | 33192-16 | Pedal axle | 1929 to 1950 | 2095-45 | 33193-45 | Starter pedal axle | Later 1945 to 1950--(Plastic pedal) | 2096-17 | 33201-17 | Pedal axle cover | 1929 to 1950 | 2096-45 | 33197-45 | Starter pedal axle spring retainer | Later 1945 to 1950--(plastic pedal) | 2097-45 | 33199-45 | Starter pedal axle lock ring | Later 1945 to 1946--(plastic pedal) | 2098-17 | 33203-17 | Pedal end plate (2) | 1929 to 1950 | 2098-45 | 33204-45 | Starter pedal end plate | Later 1945 to 1950--(plastic pedal). | 2098-46 | 33205-46 | Starter pedal end plate (outer) | 1947 to 1950 | 2099-29 | 33210-29 | Pedal end cover | 1929 to 1950 | 2100-16 | 4336 | Pedal pin bolt | Later 1930 to 1950 | 2100-46 | 33216-46 | Starter pedal bolt | 1946 to 1950 | 2101-31 | 33213-31 | Pedal pin bushing | Later 1930 to 1950 | 2102-30 | 33215-30 | Pedal pin washer | Later 1930 to 1950 | 2102-46 | 33211-46 | Starter pedal axle lock washer | 1946 to 1950 | 2105-32 | Starter crank shaft | 1932 to 1940--Servi-Cars | 2105-41 | 33093-41 | Starter crank shaft | 1941 to 1950--Servi-Cars | 2107-32 | Starter shaft coupling | 1932 to 1940--Servi-Cars | 2108-32 | 33101-32 | Starter shaft bushing | 1932 to 1950--Servi-Cars | 2165-32 | 33380-32 | Starter clutch | 1935 to 1950 | 2166-26 | 33390-26 | Starter clutch spring | 1929 to 1950 | 2168-26 | 33455-26 | Countershaft spring | 1929 to 1950 | 2172-26 | 33456-26 | Tripper bolt (2) | 1929 to 1950 | 2173-26 | 33458-26 | Tripper bolt nut (2) | 1929 to 1940 | 2173-41 | 33458-41 | Tripper bolt nut (2) | 1941 to 1950 | 2200-37 | Complete set of transmission gaskets and oil seals | 1937 to 1940 | 2200-41 | Complete set of transmission gaskets and oil seals | 1941 to 1950 |
Part 2200-41 (Complete set of transmission gaskets and oil seals) consists of: | |||
2245-26: Gear shifter shaft leather washer | |||
2245-36A: Cam shaft oil seal | |||
2262-39: Transmission case cover rubber washer | |||
2262-41: Side cover gasket | |||
2271-41: Inspection cover gasket | |||
2512-41: Clutch gear oil seal | 2202-38 | Three speed and clutch cpt. | 1938 to 1940--Solo | 2202-41A | Three speed and clutch cpt. | 1941 to 1946 Servi-Cars | 2202-41C | Reverse transmission with clutch | 1941 to 1946--Servi-Cars | 2202-41E | Three speed and clutch cpt. | 1941 to 1946 | 2202-47 | Three speed and clutch cpt. | 1947 to 1950--Solo | 2202-47A | Reverse transmission with clutch | 1947 to 1950--Solo | 2202-47C | Reverse transmission with clutch | 1947 to 1950--Servi-Cars | 2204-37 | 33675-37 | Shifter lever | 1937 to 1950 | 2204-37B | 33676-37 | Shifter lever (R.H.) | 1937 to 1946 | 2204-47A | 33676-47 | Shifter lever R.H | 1947 to 1950 | 2205-31 | 33745-31 | Gear shifter lever ball | 1931 to 1950 | 2206-37 | 33775-37 | Shifter lever and bracket stud with bushing | 1937 to 1950 | 2206-47 | 33776-47 | Shifter lever stud | 1947 to 1950 | 2207-47 | 33778-47 | Shifter lever stud bushing | 1947 to 1950 | 2208-38A | Shifter guide | 1938 to first 1940--(reverse) | 2208-40 | 33785-40 | Shifter guide | Later 1940 to 1946--(3 speed) | 2208-40A | 33786-40 | Shifter guide | Later 1940 to 1946--(reverse) | 2208-40B | 33787-40 | Shifter guide R.H | 1940 to 1946--3 speed) | 2208-40C | 33788-40 | Shifter guide R.H | 1940 to 1946--(3 speed and reverse) | 2208-47 | 33785-47 | Shifter guide | 1947 to 1950--(3 speed) | 2208-47A | 33786-47 | Shifter guide | 1947 to 1950--(reverse) | 2208-47C | 33788-47 | Shifter guide R.H | 1947 to 1950--(3 speed and reverse) | 221-40 | 18566-40 | Tappet screw | 1940 to 1950 | 221-40A | 18556-40 | Tappet screw with nut | 1940 to 1950 |
Part 221-40A (Tappet screw with nut) consists of: | |||
221-40: Tappet screw | |||
223-38: Tappet screw nut | 2210-36 | 33822-36 | Shifter guide screw (2) | 1937 to 1946 | 2212-38 | Shift rod | WL, Servi-car 1938-1940. | 2212-38B | Shifter rod complete | 1938 to 1940 | 2212-41A | 33859-41 | Shifter rod | 1941 to 1946 | 2212-41D | 33854-41 | Shifter rod complete | 1941 to 1946 | 2212-47 | 33859-47 | Shifter rod and clevis | 1947 to 1950 | 2212-47C | 33854-47 | Shifter rod cpt | 1947 to 1950--Servi-Cars | 2214-36 | "Shift rod end " | All models 1936-1950. Servi-car, UL, WL, WLA, WLC, Knucklehead, Panhead. | 2215-37 | 33682-37 | Gear shifter lever (lower) | 1937 to 1950 | 2215-38 | 33699-38 | Gear shifter cross shaft | 1938 to 1950 | 2215-41 | 33874-41 | Shifter rod clevis pin | 1941 to 1950 | 2225-36 | 33879-36 | Shifter rod end bolt | 1938 to 1950 | 2228-31 | Cross shaft plain washer | 1938 to 1948 | 223-38 | 18570-38 | Tappet screw nut | 1940 to 1950 | 2241-38 | Gear shifter gear | 1938 to 1940 | 2241-41 | 33961-41 | Gear shifter gear | 1941 to 1946 | 2241-47 | 33961-47 | Gear shifter gear | 1947 to 1950 | 2242-36B | 6466 | Mounting base center screw washer | 1947 to 1950 | 2242-38A | 33964-38 | Shifter gear retaining spring | 1938 to 1950 | 2242-38B | 34427-38 | Shifter shaft small bushing | 1938 to 1950 | 2242-38C | 34432-38 | Shifter shaft large bushing | 1938 to 1950 | 2242-40 | 34449-40 | Shifter lever and shaft | Later 1940 to 1950 | 2243-40 | Shifting cam | 1940 | 2243-41 | 34012-41 | Shifting cam | 1941 to 1946 | 2243-47 | 34012-47 | Shifting cam | 1947 to 1950 | 2244-38 | Shifter cam shaft | Servi-car, WL, WLA 1938-1941. | 2244-38A | 34051-38 | Cam shaft lock screw | 1938 to 1950 | 2244-41 | 34031-41 | Shifter cam shaft | 1941 to 1950 | 2245-26 | 34459-26 | Gear shifter shaft leather washer | 1937 to 1950 | 2245-36A | 34036-36 | Cam shaft oil seal | 1937 to 1950 | 2245-38 | Shifting fork shaft | 1938 to 1940 | 2245-41 | 34140-41 | Shifting fork shaft | 1941 to 1950 | 2246-33 | Shifting fork 2nd & high | Servi-car, RL, WL 1933-1940. | 2247-33 | Shifter fork, low & reverse | Servi-car, RL, WL 1933-1940. | 2247-41 | 34161-41 | Gear shifter fork (2) | 1941 to 1950 | 2248-36 | 34165-36 | Shifting finger (2) | 1940 to 1950 | 2248-39 | 34168-39 | Shifting finger roller | 1940 to 1950 | 2249-36 | 34175-36 | Shifting fork bushing (2) | 1940 | 2249-41 | 34176-41 | Shifting fork bushing (2) | 1941 to 1950 | 2250-33 | 34179-33 | Bushing nut (2) | 1935 to 1950 | 2251-33 | 34180-33 | Bushing lock washer (2) | 1935 to 1950 | 2251-36 | 8872 | Gear shifter cam plunger ball | 1940 to 1950 | 2251-36A | 34057-36 | Cam plunger ball spring | 1940 to 1950 | 2251-36B | 34053-36 | Cam plunger cap screw | 1940 to 1950 | 2253-33 | 6754 | Spacer shim, 5/64" thick (2) | 1935 to 1950 | 2253-33A | 6752 | Shifter fork shim, .014" (2 to 10) | 1935 to 1950 | 2253-33B | 6750 | Shifter fork shim, .007" (1 to 2) | 1935 to 1950 | 2258-40 | Gearbox housing | Servi-car, WL 1940 | 2258-41 | 34702-41 | Gear box only | 1941 to 1950 | 2260-39 | Gearbox sidecover | WL, Servi-car 1939-1940. | 2260-41 | 34821-41 | Gear box side cover | 1941 to 1950 | 2262-33 | Side cover gasket | 1935 to 1940 | 2262-39 | 34831-39 | Transmission case cover rubber washer | 1939 to 1950 | 2262-41 | 34826-41 | Side cover gasket | 1941 to 1950 | 2264-38 | 34833-38 | Transmission case cover oil pipe support bracket | 1938 to 1950--Servi-Cars | 2270-38 | Gear box top cover | 1938 to 1940 | 2270-41 | 34813-41 | Gear box top cover | 1941 to 1950 | 2271-33 | Inspection cover gasket | 1937 to 1940 | 2271-38 | Top cover gasket | WL, Servi-car 1938-1940. | 2271-41 | 34825-41 | Inspection cover gasket | 1941 to 1950 | 2272-33 | Mainshaft | RL, WL, Servi-car 1933-1940. | 2272-41 | Main shaft | 1941 to 1950 | 2278-26 | 35216-26 | Main shaft sprocket nut lock washer | 1929 to 1950 | 2279-26 | 35195-26 | Mainshaft sprocket key | 1929 to 1950 | 2289-17 | 9301 | Crank pin roller, 1/4" x .270" long (24) standard | 1929 to 1950 | 2289-17D | 9302 | Crank pin roller, 1/4" x .270" long (24) - .0002" O.S. | 1929 to 1950 | 2289-17F | 9303 | Crank pin roller, 1/4" x .270" long (24) - .0004" O.S. | 1929 to 1950 | 2289-17H | 9304 | Crank pin roller, 1/4" x .270" long (24) - .0006" O.S. | 1929 to 1950 | 2289-17KA | 9305 | Crank pin roller, 1/4" x .270" long (24) - .0008" O.S. | 1929 to 1950 | 2289-17MA | 9306 | Crank pin roller, 1/4" x .270" long (24) - .001" O.S. | 1929 to 1950 | 2289-25 | 9220 | Roller (14 per hub) | 1937 to 1950 | 2289-36F | 9085 | Clutch gear roller bearing .0004" O.S. | 1941 to 1950 | 2289-36KA | 9086 | Clutch gear roller bearing .0008" O.S. | 1941 to 1950 | 2289-39 | 9075 | Countershaft bearing rollers right end (24) (.114" x 3/4") - standard | 1939 to 1950 | 2289-39F | 9976 | Countershaft bearing roller, right end .0004" O.S. | 1939 to 1950 | 2289-39KA | 9077 | Countershaft bearing roller, right end .0008" O.S. | 1939 to 1950 | 2290-33 | 35102-33 | Outer bearing race | 1935 to 1950 | 2291-33 | 35110-33 | Bearing thrust washer,main shaft | 1935 to 1950 | 2292-33 | 35340-33 | Thrust washer | 1935 to 1950 | 2293-36 | Set oil retaining washers, sprocket side | 1936 to 1940 | 2293-36A | 35221-36 | Mainshaft sprocket oil seal | 1936 to 1950 | 2293-41 | 35219-41 | Mainshaft sprocket side oil retainer | 1941 to 1950 | 2294-39 | Low gear | Servi-car, WL 1939-1940. | 2294-39AB | Low and second gear end thrust washer (.029") | WL, WLA 1939-1940. Servi-car | 2294-39AC | Low and second gear end thrust washer ( .032") | WL, WLA 1939-1940. Servi-car | 2294-39AD | Low and second gear end thrust washer (.035") | WL, WLA 1939-1940. Servi-car | 2294-39AE | Low and second gear end thrust washer ( .038") | WL, WLA 1939-1940. Servi-car | 2294-39AF | Thrust washer, low and second gear end .041" | WL, WLA 1939-1940. Servi-car | 2294-39C | Set of gear end thrust washers .029" - .041" | WL, WLA 1939-1940. Servi-car |
Part 2294-39C (Set of gear end thrust washers .029" - .041") consists of: | |||
2294-39AB: Low and second gear end thrust washer (.029") | |||
2294-39AC: Low and second gear end thrust washer ( .032") | |||
2294-39AD: Low and second gear end thrust washer (.035") | |||
2294-39AE: Low and second gear end thrust washer ( .038") | |||
2294-39AF: Thrust washer, low and second gear end .041" | 2294-41 | 35275-41 | Mainshaft low gear | 1941 to 1950 | 2294-41AB | 35347-41 | Low and second gear end thrust washer .040" | 1941 to 1950 | 2294-41AC | 35348-41 | Low and second gear end thrust washer .045" | 1941 to 1950 | 2294-41AD | 35349-41 | Low and second gear end thrust washer .050" | 1941 to 1950 | 2294-41AE | 35350-41 | Low and second gear end thrust washer .055" | 1941 to 1950 | 2294-41AF | 35351-41 | Low and second gear end thrust washer .060" | 1941 to 1950 | 2294-41AG | 35352-41 | Low and second gear end thrust washer .065" | 1941 to 1950 | 2294-41AH | 35353-41 | Low and second gear end thrust washer .070" | 1941 to 1950 | 2294-41AI | 35354-41 | Low and second gear end thrust washer .075" | 1941 to 1950 | 2294-41B | 35341-41 | Low gear end thrust washer | 1941 to 1950 | 2294-41C | 35344-41 | Set of low and second gear end thrust washer | 1941 to 1950 |
Part 2294-41C (Set of low and second gear end thrust washer) consists of: | |||
2294-41AB: Low and second gear end thrust washer .040" | |||
2294-41AC: Low and second gear end thrust washer .045" | |||
2294-41AD: Low and second gear end thrust washer .050" | |||
2294-41AE: Low and second gear end thrust washer .055" | |||
2294-41AF: Low and second gear end thrust washer .060" | |||
2294-41AG: Low and second gear end thrust washer .065" | |||
2294-41AH: Low and second gear end thrust washer .070" | |||
2294-41AI: Low and second gear end thrust washer .075" | 2295-39 | Second gear | WL, WLA 1939-1940. Servi-car | 2295-41 | 35294-41 | Second gear | 1941 to 1950 | 2296-33 | Reverse gear | 1933 to 1940 | 2296-33A | 35332-33 | Spacer collar | 1933 to 1950 (Used in place of reverse gear on 45" three speed) | 2296-41 | 35284-41 | Reverse gear | 1941 to 1950 | 2297-33 | 35326-33 | Reverse gear bushing | 1933 to 1950 | 2297-39A | Second gear bushing | Servi-car, WL 1939-1940. | 2297-39B | Low gear bushing | Servi-car, WL 1939-1940. | 2297-41 | 35320-41 | Second gear bushing | 1941 to 1950 | 2297-41A | 35316-41 | Low gear bushing | 1941 to 1950 | 2298-33 | Low and reverse shifter clutch | Reverse. Servi-car, WL 1935-1940. | 2298-36 | 35441-36 | Shifter clutch, low gear | 1936 to 1940 (3 speed) | 2298-39A | 35445-39 | Shifter clutch, second and high | 1939 & 1940 | 2298-41 | 35445-41 | Shifter clutch, second and high | 1941 to 1950 | 2298-41A | 35442-41 | Shifter clutch, low and reverse gear | 1941 to 1950 (Reverse) | 2298-41B | 35441-41 | Shifter clutch, low gear | 1941 to 1950 (3 speed) | 2299-33A | 35335-33 | Bracket bolt lock washer | 1935 to 1950 | 2299-39 | Second gear retaining bracket | Servi-car, WL 1939-1940. | 2299-41 | 35333-41 | Second gear retaining bracket | 1941 to 1950 | 2300-33 | 35613-33 | Countershaft | 1935 to 1940 | 2300-41 | 35613-41 | Countershaft | 1941 to 1950 | 2303-33 | Countershaft gear | 1935 to 1940 | 2303-41 | 35709-41 | Countershaft gear | 1941 to 1950 | 2305-33 | 35911-33 | Inner bearing thrust washer, left end | 1935 to 1950 | 2305-39 | 35913-39 | Countershaft roller bearing end washer, right end (2) | 1939 to 1950 | 2306-32 | 9090 | Countershaft bearing roller, left end (19) (.152" x 5/8") - standard | 1935 to 1950 | 2306-32F | 9091 | Mainshaft right bearing roller .0004" O.S. | 1935 to 1950 | 2306-32KA | 9092 | Countershaft bearing roller, left end .0008" O.S. | 1935 to 1950 | 2308-33 | 35910-33 | Outer bearing thrust washer, left end | 1935 to 1950 | 2312-26 | 36035-26 | Countershaft bushing, left | 1929 to 1950 | 2314-39 | Gearbox countershaft bushing | WL, Servi-car 1939-1940. | 2314-41 | 36042-41 | Transmission side cover countershaft bushing | 1941 to 1950 | 2318-26 | 34725-26 | Gear box bottom stud | 1929 to 1950 | 2326-26 | Plug 5/8"-18 | All models 1938-1940. Servi-car, WL 1938-1940. | 2326-35 | Gear box filler plug (11/16"-18) | Servi-car, WL 1935-1940. | 2326-38 | 704 | Timing hole plug | 1938 to 1950 | 2326-41 | 703 | Transmission oil filler plug | 1941 to 1950 | 2328-27 | 34736-27 | Gear box adjusting screw | 1929 to 1950 | 234-30 | 18605-30 | Tappet guide, front (2) | 1929 to 1950 | 2345-32A | Sprocket cover upper bushing | Servi-car, RL, WL 1932-1940. | 2345-32B | Sprocket cover lower bushing | Servi-car, RL, WL 1932-1940. | 2345-33 | Sprocket cover | RL, WL 1935-1940. | 2345-36 | Pushing rod bearing guard | Servi-car, RL, WL 1936-1940. | 2345-38 | Sprocket cover | 1938 to 1940--Servi-Cars | 2345-41 | 34873-41 | Sprocket cover | 1941 to 1943--Solo and later 1942--model WLA | 2345-41A | 34871-41 | Sprocket cover | 1941 to 1950--Servi-Cars | 2345-41B | 34885-41 | Sprocket cover bushing (2) | 1941 to 1943--Solo except later 1942 model WLA, 1941 to 1950--Servi-Cars | 2345-44 | 34873-44 | Sprocket cover | 1944 to 1950--Solo | 2345-44A | 34885-44 | Sprocket cover bushing (2) | 1944 to 1950--Solo | 2346-32 | Sprocket cover pin | 1932 to 1940 | 2346-33 | 34892-33 | Sprocket cover shoulder stud (2) | 1935 to 1950 | 2346-33A | 34891-33 | Sprocket cover shoulder stud | 1935 to 1950 | 2346-33B | 34890-33 | Sprocket cover stud (2-15/16") | 1935 to 1950 | 2346-41 | 34898-41 | Sprocket cover pin | 1941 to 1950 | 2347-32 | 34900-32 | Sprocket cover brace | 1932 to 1950--Servi-Cars | 2348-32 | 34904-32 | Brace washer | 1932 to 1950--Servi-Cars | 235-30 | 18606-30 | Tappet guide, rear (2) | 1929 to 1950 | 2365-33 | Idler gear | 1935 to 1940 (Reverse) | 2365-41 | 36141-41 | Idler gear | 1941 to 1950 (Reverse) | 2366-41 | 36152-41 | Idler gear bushing | 1941 to 1950 (Reverse) | 2367-33 | Idler gear shaft | 1935 to 1940 (Reverse) | 2367-41 | 36159-41 | Idler gear shaft | 1941 to 1950 (Reverse) | 237-30 | 18631-30 | Tappet guide gasket | 1930 to 1950, 1936 to 1950--with iron heads, 1940 to 1950--with aluminum heads | 2402-41 | 36752-41 | Clutch cpt. | 1941 to 1950 | 2409-38B | 36812-38 | Clutch Foot Lever | 45" | 2409-38C | 36832-38 | Foot lever bearing cover | 1938 to 1946--1947 to 1950--Solo only | 2409-47 | 36813-47 | Clutch foot lever | 1947 to 1950-Servi-Cars | 2410-36A | 36857-36 | Foot lever bracket bushing | 1938 to 1946--1947 to 1950--Solo only. | 2411-40 | 36871-40 | Foot lever bracket spring stud | 1940 to 1946--1947 to 1950--Solo only. | 2412-36 | 36880-36 | Foot lever spring | 1938 to 1946--1947 to 1950--Solo only. | 2412-47 | 36882-47 | Foot lever spring | 1947 to 1950--Servi-Cars | 2413-38 | 36888-38 | Foot lever pin | 1938 to 1946--1947 to 1950--Solo only. | 2415-47 | 36903-47 | Clutch Foot Lever Mounting Kit | 45" | 2416-36 | 36901-36 | Foot lever friction disc, steel | 1938 to 1946--1947 to 1950--Solo only. | 2417-36 | 36897-36 | Foot lever friction disc, moulded | 1938 to 1946--1947 to 1950--Solo only. | 2417-36B | 36895-36 | Foot lever bracket friction disc | 1938 to 1946--1947 to 1950--Solo only. | 2419-36 | 36906-36 | Lever friction spring washers (2) | 1938 to 1946--1947 to 1950--Solo only. | 2419-36A | 36908-36 | Friction spring washer disc | 1938 to 1946--1947 to 1950--Solo only. | 2422-36 | 36916-36 | Clutch lever rod end | 1938 to 1946 | 2422-47 | 36993-47 | Clutch release cable clevis | 1947 to 1950 | 2423-30 | 42269-30 | Rear brake rod clevis pin | 1935 to 1950--solo | 2424-38 | Clutch lever rod | WL, Servi-car 1938-1940. | 2424-41 | 36975-41 | Clutch release cable and tube cpt. | 1941 to 1950 | 2425-41 | 36983-41 | Clutch release cable felt washer (2) | 1941 to 1950 | 2426-41 | 37052-41 | Clutch release lever | 1941 to 1943--Solo,except later 1942 model WLA, 1941 to 1950--Servi-Cars | 2426-44 | 37052-44 | Clutch release lever | 1944 to 1950--Solo, Later 1942 model WLA | 2427-40 | Clutch release rod lever | WL, Servi-car 1940. | 2431-41 | 37076-41 | Clutch release lever screw (2) | 1941 to 1943--Solo, except later 1942 model WLA, 1941 to 1950--Servi-Cars | 2431-44 | 37077-44 | Clutch release lever screw (2) | 1944 to 1950--Solo, Later 1942 model WLA | 2432-41 | 37080-41 | Release lever screw lock washer (2) | 1941 to 1943--Solo, except later 1942 model WLA, 1941 to 1950--Servi-Cars | 2432-41A | 37084-41 | Release lever spring washer | 1941 to 1950 | 2436-26 | Clutch release finger | WL, Servi-car 1929-1940. | 2446-33 | Clutch pushrod (8 5/8") | RL, WL, Servi-car 1935-1940 (and reverse 1933-1934). | 2446-41 | 37287-41 | Clutch push rod and bearing cpt. | 1941 to 1950 | 2448-36 | Pushrod bearing | WL, Servi-car 1938-1940. Big Twins | 2458-38 | 37312-38 | Ball race retainer spring ring | 1941 to 1944 | 2459-41A | 37347-41 | Clutch push rod oil seal spring | 1941. | 2459-42 | 37347-42 | Oil seal spring | 1941 to 1950 | 2461-36B | Push rod cork washer spring | 1937 to 1940 | 2461-41 | 37350-41 | Spring cup - push rod | 2461-41A | Push rod guide | 1941 | 2461-41B | 37354-41 | Push rod guide spring ring | 1941 to 1950 | 2461-41D | 37335-41 | Set of push rod oil seal parts | 1941 to 1950 |
Part 2461-41D (Set of push rod oil seal parts) consists of: | |||
0208: 1/4" x 5/8" x 1/16" plain steel washer | |||
2459-42: Oil seal spring | |||
2461-42: Push rod oil seal (13/16) | |||
2461-42A: Push rod oil seal (13/16") 41 to 57--W & G models | |||
2461-42B: Push rod guide | |||
2462-42: Oil seal retainer | 2461-42 | 37338-42 | Push rod oil seal (13/16) | 1941 to 1950 | 2461-42A | 37339-42 | Push rod oil seal (13/16") 41 to 57--W & G models | 1941 to 1957--WL & G models | 2461-42B | 37352-42 | Push rod guide | 1941 to 1950 | 2462-42 | 37345-42 | Oil seal retainer | 1941 to 1950 | 2463-34 | Push rod adjusting screw | WL, Servi-car 1934-1940. | 2463-41A | 37358-41 | Push rod adjusting screw | 1941 to 1950 | 2464-26 | Push rod ball | WL, Servi-car 1929-1940 | 2465-26 | Push rod adjusting screw | 1929 to 1940 | 2465-41 | 37361-41 | Push rod adjusting screw | 1941 to 1950 | 2472-41A | 37551-41 | Clutch hub assembly | 1941 to 1950 | 2472-41B | 8856 | Clutch hub ball bearing, 7/32" (36) | 1941 to 1950 | 2473-41A | 37568-41 | Clutch hub ball bearing retainer | 1941 to 1950 | 2474-44 | 37574-44 | Clutch hub bearing plate spring (2) | 1944 to 1950 | 2475-41A | 37577-41 | Clutch huh bearing plate | 1941 to 1950 | 2476-47 | 37581-47 | Clutch drive hub stud nut (3) | 1947 to 1950 | 2477-41A | 37584-41 | Clutch drive hub stud (3) | 1941 to 1950 | 2478-41B | 37586-41 | Clutch drive hub pin (7) | 1941 to 1950 | 2479-41A | 37873-41 | Clutch releasing disc | 1941 to 1950 | 2481-41C | 37952-41 | Outer spring disc | 1941 to 1950 | 2481-41E | 37851-41 | Set of lined clutch discs | 1941 to 1950 |
Part 2481-41E (Set of lined clutch discs) consists of: | |||
2481-41A: Clutch friction disc | |||
2481-41C: Outer spring disc | |||
2482-41A: Clutch friction disc lining | |||
2485-41: Clutch friction disc lining rivet | 2481-46 | 37954-46 | Clutch cushion plate | 1947 to 1950 | 2482-41A | 37862-41 | Clutch friction disc lining | 1941 to 1950 | 2484-29 | Set of clutch linings and rivets | Late 1939 & 1940 |
Part 2484-29 (Set of clutch linings and rivets) consists of: | |||
2485-40: Sprocket friction disc rivet | |||
2533-26: Clutch sprocket drive disc, fibre | |||
2534-29: Outer clutch disc | 2484-41A | Set of clutch linings and rivets | 1941 to 1950 |
Part 2484-41A (Set of clutch linings and rivets) consists of: | |||
2482-41A: Clutch friction disc lining | |||
2485-12: Clutch friction disc lining rivet | |||
2485-41: Clutch friction disc lining rivet | |||
2485-41A: Clutch friction disc lining rivet | 2485-12 | Clutch friction disc lining rivet | 1941 to 1950 | 2485-40 | 8240 | Sprocket friction disc rivet | Late 1939 & 1940 | 2485-41 | 8227 | Clutch friction disc lining rivet | 1941 to 1950 | 2485-41A | 8226 | Clutch friction disc lining rivet | 1941 to 1950 | 2487-41A | 37977-41 | Clutch steel disc (2) | 1941 to 1950 | 2488-41 | 38025-41 | Set of drive disc buffers cpt.(2) | 1941 to 1950 | 2505-41A | 38011-41 | Clutch pressure plate | 1941 to 1950 | 2511-30 | Clutch spring (12) | 1934 to 1940 | 2511-41 | 38077-41 | Clutch springs | 1941 to 1950 | 2512-41 | 37465-41 | Clutch gear oil seal | 1941 to 1950 | 2512-41A | 38110-41 | Clutch Spring guide stud nut lock (3) | 1941 to 1946 | 2513-33 | Clutch gear | RL, WL, Servi-car 1934-1940. | 2513-41 | 37450-41 | Clutch gear | 1941 to 1950 | 2514-41 | 37458-41 | Clutch gear bushing | 1941 to 1950 | 2515-41 | 37460-41 | Clutch gear nut | 1941 to 1950 | 2515-41A | 37462-41 | Clutch gear nut lock washer | 1941 to 1950 | 2516-26A | Mainshaft spacer, set ( .095" - .135") | DL, RL, WL, Servi-car 1929-1940. Singles 1926-1934. |
Part 2516-26A (Mainshaft spacer, set ( .095" - .135")) consists of: | |||
2516-26B: Set of mainshaft spacers .90" | |||
2516-26C: Mainshaft spacer (.095") | |||
2516-26D: Mainshaft spacer (.100") | |||
2516-26E: Mainshaft spacer (.105") | |||
2516-26F: Mainshaft spacer ( .110") | |||
2516-26G: Mainshaft spacer (.115") | |||
2516-26H: Set of mainshaft spacers .120" | |||
2516-26JA: Mainshaft spacer (.125") | 2516-26B | Set of mainshaft spacers .90" | 1929 to 1940 | 2516-26C | Mainshaft spacer (.095") | WL, Servi-car 1929-1940. | 2516-26D | Mainshaft spacer (.100") | WL, Servi-car 1929-1940. | 2516-26E | Mainshaft spacer (.105") | DL, RL, WL, Servi-car 1929-1940. Singles 1926-1934. | 2516-26F | Mainshaft spacer ( .110") | WL, Servi-car 1929-1940. | 2516-26G | Mainshaft spacer (.115") | WL, Servi-car 1929-1940. | 2516-26H | Set of mainshaft spacers .120" | 1929 to 1940 | 2516-26JA | Mainshaft spacer (.125") | DL, RL, WL, Servi-car 1929-1940. Singles 1926-1934. | 2516-26KA | Set of mainshaft spacers .130" | 1929 to 1940 | 2516-26LA | Mainshaft spacer (.135") | DL, RL, WL, Servi-car 1929-1940. Singles 1926-1934. | 2516-26MA | Set of mainshaft spacers .140" | 1929 to 1940 | 2516-41A | 35380-41 | Set of mainshaft spacers | 1941 to 1950 |
Part 2516-41A (Set of mainshaft spacers) consists of: | |||
2516-41B: Set of mainshaft spacers .075" | |||
2516-41C: Set of mainshaft spacers .083" | |||
2516-41D: Set of mainshaft spacers .088" | |||
2516-41E: Set of mainshaft spacers .093" | |||
2516-41F: Set of mainshaft spacers .098" | |||
2516-41G: Set of mainshaft spacers .103" | |||
2516-41H: Set of mainshaft spacers .108" | |||
2516-41JA: Set of mainshaft spacers .113" | 2516-41B | 35384-41 | Set of mainshaft spacers .075" | 1941 to 1950 | 2516-41C | 35385-41 | Set of mainshaft spacers .083" | 1941 to 1950 | 2516-41D | 35386-41 | Set of mainshaft spacers .088" | 1941 to 1950 | 2516-41E | 35387-41 | Set of mainshaft spacers .093" | 1941 to 1950 | 2516-41F | 35388-41 | Set of mainshaft spacers .098" | 1941 to 1950 | 2516-41G | 35389-41 | Set of mainshaft spacers .103" | 1941 to 1950 | 2516-41H | 35390-41 | Set of mainshaft spacers .108" | 1941 to 1950 | 2516-41JA | Set of mainshaft spacers .113" | 1941 to 1950 | 2518-33 | Clutch gear roller bearing race | 1935 to 1940 | 2518-41 | 37474-41 | Left bearing outer race | 1941 to 1950 | 2520-33 | Clutch gear roller bearing thrust washer | RL, WL, Servi-car 1935-1940. Reverse 1933-1934. | 2520-41 | 37480-41 | Clutch gear roller bearing trust washer | 1936 to 1940 | 2520-41A | 37482-41 | Clutch gear roller bearing retainer washer | 1941 to 1950 | 2521-33 | Thrust bearing cpt. | 1935 to 1940 | 2521-41 | 37467-41 | Thrust bearing cpt. | 1941 to 1950 | 2522-33 | Thrust bearing & bearing race | RL, WL, Servi-car 1935-1940. Reverse 1933-1934. | 2522-41 | 37477-41 | Thrust bearing race | 1941 to 1950 | 2524-36 | Oil seal | WL, Servi-car 1936-1940. | 2528-33 | 37625-33 | Inner clutch disc complete | 1935 to 1940 | 253-29A | 22251-29 | Piston with rings and pin - standard size | 1919 to 1950 | 253-29D | 22253-29 | Piston with rings and pin - .010" O.S. | 1919 to 1950 | 253-29E | 22254-29 | Piston with rings and pin - .020" O.S. | 1919 to 1950 | 253-29F | Piston with rings and pin - .030" O.S. | 1919 to 1950 | 253-29G | 22256-29 | Piston with rings and pin - .040" O.S. | 1919 to 1950 | 253-29H | 22257-29 | Piston with rings and pin - .050" O.S. | 1919 to 1950 | 2530-33 | 37645-33 | Inner disc lock washer | 1935 to 1940 | 2531-33 | 37647-33 | Inner drive disc lock nut | 1935 to 1940 | 2533-26 | Clutch sprocket drive disc, fibre | Late 1939 & 1940 | 2534-29 | Outer clutch disc | DL, RL, WL, 1929-1940. | 2535-31 | 37865-31 | Steel friction disc (2) | 1932 to 1940 | 2535-40 | Clutch plate spring (coiled type) | 1939 & 1940 | 2536-33 | 37727-33 | Clutch sprocket bearing race | 1935 to 1940 | 2537-33 | Inner drive disc ball bearing race | 1935 to 1940 | 2538-33 | 37730-33 | Inner drive disc ball bearing washer | 1935 to 1940 | 2539-33 | 37731-33 | Ball bearing spacer washer | 1935 to 1940 | 2540-33 | 8852 | Inner drive disc clutch bearing ball (96) (5/32") | 1935 to 1940 | 2543-31 | 37743-31 | Clutch key ring | 1932 to 1940 | 2544-34 | 37977-34 | Drive disc with adjusting spring stud | 1934 to 1940 | 2547-34 | Clutch spring compression collar | 1934 to 1940 | 2548-40 | 38112-40 | Clutch spring tension adjusting nut | 1940 | 2549-34 | 38108-34 | Clutch spring guide stud (4) | 1934 to 1940 | 2550-34 | 38120-34 | Clutch thrust cap | 1934 to 1940 | 2551-29 | 6208 | Push rod steel washer | 1929 to 1940 | 2552-29 | Clutch release push rod washer | DL, RL, WL, 1929-1940. | 2555-41A | Hand clutch control cpt. | 1941 to 1948 | 2555-49 | 38602-49 | Hand clutch control cpt. | 1949 & 1950 | 2556-41 | 38610-41 | Hand clutch control coil | 1941 to 1950 | 2557-41 | 38630-41 | Control wire | 1930 to 1950 | 2558-41 | Control cable end nut | 1941 to 1950 | 2558-41A | Control cable end screw | 1941 to 1950 | 2558-41B | 6255 | Control cable end washer | 1941 to 1950 | 2558-41C | 38700-41 | Hand lever cpt. | 1941 to 1948 | 2558-49 | 38700-49 | Hand lever cpt. | 1949 to 1950 | 2559-41 | 38705-41 | Hand lever bracket | 1941 to early 1946, 1942 & 1943 model WLC | 2559-46 | 38705-46 | Hand lever bracket | 1946 to 1948 | 2559-49 | 38705-49 | Hand lever bracket | 1949 & 1950 | 2560-41 | 38670-41 | Control coil bracket | 1941 to 1950 | 2561-41 | 38710-41 | Bracket clamp | 1941 to 1948 except 1942 & 1943 model WLC | 2564-43 | 38672-43 | Hand clutch control coil extension | 1943 model WLC, Late 1945 & early 1946 45" (Used only with iron hand levers) | 2568-43 | 38712-43 | Hand lever clamp bushing lock washer | 1942 & 1943 model WLC, Late 1945 and early 1946 (Used only with iron head levers) | 260-29 | Piston compression ring - standard size (.120" wide) | Fits bottom ring groove only on all cam ground pistons, use in place of 263-38 oil control ring when desired. | 260-29C | Piston compression ring - .005" O.S. | 260-29D | Piston compression ring - .010" O.S. | 260-29E | Piston compression ring - .020" O.S. | 260-29F | Piston compression ring - .030. O.S. | 260-29G | Piston compression ring - .040" O.S. | 260-29JA | Piston compression ring - .060" O.S. | 260-29KA | Piston compression ring - .070" O.S. | 260-34 | Compression ring | 1937 to 1950--except Servi-Cars | 2602-40 | Set of forks cpt. (black) | 1940 to 1950--Solo, 1940 GA & GD Servi-Cars | 2602-40A | Set of forks cpt. (black) | 1940 G & GDT Servi-Cars | 2602-41 | Set of forks cpt. (black) | 1941 to 1950 Servi-Cars, 1942 & 1943-45" Model WLC | 2605-40 | Rigid fork (black) | 1940 to 1950--Solo, 1940 Servi-Cars | 2605-40M | Rigid fork (see note following) | 1940 & 1941--model WLA | 2605-41 | Rigid fork (black) | 1941 to 1950 Servi-Cars, 1942 & 1943--45" Model WLC | 2606-36 | Spring fork (black) | 1941 to 1950--Servi-Cars, 1942 & 1943 model WLC | 2607-40 | Spring fork (black) | 1940 to 1950--Solo, 1940--Servi-Cars | 2607-40M | Spring fork | 1940 & 1941 model WLA | 261-38 | 22355-38 | Set of piston rings - standard size | 1937 to 1950--except Servi-Cars |
Part 261-38 (Set of piston rings - standard size) consists of: | |||
260-34: Compression ring | |||
263-38: Oil control ring | 261-38A | 22356-38 | Set of piston rings - .005" O.S. | 1937 to 1950--except Servi-Cars | 261-38B | 22357-38 | Set of piston rings - .010" O.S. | 1937 to 1950--except Servi-Cars | 261-38C | 22358-38 | Set of piston rings - .020" O.S. | 1937 to 1950--except Servi-Cars | 261-38D | 22359-38 | Set of piston rings - .030" O.S. | 1937 to 1950--except Servi-Cars | 261-38E | 22360-38 | Set of piston rings - .040" O.S. | 1937 to 1950--except Servi-Cars | 261-38F | 22361-38 | Set of piston rings - .050" O.S. | 1937 to 1950--except Servi-Cars | 261-38G | 22362-38 | Set of piston rings - .060" O.S. | 1937 to 1950--except Servi-Cars | 261-38H | Set of piston rings - .070" O.S. | 1937 to 1950--except Servi-Cars | 261-40 | 22355-40 | Set of piston rings - standard | 1937 to 1950--Servi-Cars |
Part 261-40 (Set of piston rings - standard) consists of: | |||
260-34: Compression ring | |||
263-40: 0il control ring | 261-40A | 22356-40 | Set of piston rings - .005" O.S. | 1937 to 1950--Servi-Cars | 261-40B | 22357-40 | Set of piston rings - .010" O.S. | 1937 to 1950--Servi-Cars | 261-40C | 22358-40 | Set of piston rings - .020" O.S. | 1937 to 1950--Servi-Cars | 261-40D | 22359-40 | Set of piston rings - .030" O.S. | 1937 to 1950--Servi-Cars | 261-40E | 22360-40 | Set of piston rings - .040" O.S. | 1937 to 1950--Servi-Cars | 261-40F | 22361-40 | Set of piston rings - .050" O.S. | 1937 to 1950--Servi-Cars | 261-40G | 22362-40 | Set of piston rings - .060" O.S. | 1937 to 1950--Servi-Cars | 261-40H | 22363-40 | Set of piston rings - .070" O.S. | 1937 to 1950--Servi-Cars | 2617-36 | Set of front fork springs | 1940 to 1950--Solo |
Part 2617-36 (Set of front fork springs) consists of: | |||
2618-30A: Upper fork spring | |||
2620-37: Cushion spring | |||
2622-30: Recoil bumper spring | |||
2622-36: Cushion spring buffer spring | 2618-30A | Upper fork spring | 1940 to 1950--Solo | 2620-37 | Cushion spring | 1940 to 1950--Solo | 2621-39 | Cushion spring buffer spring | 1939 to 1950-Servi-Cars and 1942 & 1943 model WLC | 2622-30 | Recoil bumper spring | 1940 to 1950--Solo | 2622-36 | Cushion spring buffer spring | 1940 to 1950--Solo | 2622-48 | Fork buffer spring | 1948 to 1950 Solo models only using shock absorber | 263-38 | 22395-38 | Oil control ring | 1937 to 1950--except Servi-Cars | 263-40 | 22395-40 | 0il control ring | 1937 to 1950--Servi-Cars | 2631-36 | Spring rod | 1940 to 1950 | 2632-31 | Spring rod bushing | 1931 to 1945 | 2633-30A | Spring rod nut, lower end (2) | 1930 to 1950 | 2634-30 | Spring rod nut, upper end | 1930 to 1950 | 2634-30A | 7905 | Rear axle nut | 1935 to 1950--solo | 2634-36 | Spring rod lock nut (2) | 1936 to 1950 | 2635-30 | Left rocker plate | 1941 to 1950 Servi-Cars, 1942 & 1943 Model WLC | 2636-30 | Right rocker plate | 1941 to 1950 Servi-Cars, 1942 & 1943 Model WLC | 2636-30A | Rocker plate (2) | 1930 to 1950, 1932 to 1940-Servi-Cars | 2638-36 | Set of rocker plate studs and bushings | 1941 to 1950 Servi-Cars, 1942 & 1943--model WLC |
Part 2638-36 (Set of rocker plate studs and bushings) consists of: | |||
0129: 3/8"-24 N.F. x 1/4" x 9/16" hexagon nut | |||
2639-31: Front rocker plate stud | |||
2640-31: Rear rocker plate stud | |||
2642-30: Front rocker plate stud nut lock | |||
2642-31A: Rear rocker plate stud nut lock | |||
2643-31: Rocker plate stud nut, inside | |||
2645-30: Rocker plate stud bushing | 2638-36A | Set of rocker plate studs and bushings | 1930 to 1950--Solo, 1932 to 1940--Servi-Cars |
Part 2638-36A (Set of rocker plate studs and bushings) consists of: | |||
0231: Front rocker plate stud washer | |||
2640-30A: Left front rocker plate stud | |||
2640-30B: Right front rocker plate stud | |||
2641-30: Brace bolt nut | |||
2642-30: Front rocker plate stud nut lock | |||
2642-40: Front rocker plate stud nut lock | |||
2644-30: Bottom stud nut | |||
2645-30A: Rocker plate stud bushing | 2639-31 | Front rocker plate stud | 1941 to 1950 Servi-Cars, 1942 & 1943--model WLC | 2640-30A | Left front rocker plate stud | 1930 to 1950--Solo, 1932 to 1940--Servi-Cars | 2640-30B | Right front rocker plate stud | 1930 to 1950--Solo, 1932 to 1940--Servi-Cars | 2640-30C | Rear rocker plate stud | 1930 to 1950--Solo, 1932 to 1940--Servi-Cars | 2640-30D | Front stand stud (2) | 1930 to 1950 | 2640-31 | Rear rocker plate stud | 1941 to 1950 Servi-Cars, 1942 & 1943--model WLC | 2640-31E | Rear rocker plate stud | 1942 & 1943 WLC (With Front Stand) | 2640-39 | Towbar stud (2) | 1939 & 1940--Servi-Cars | 2640-39A | Towbar stud | 1940 to 1950--Servi-Cars | 2641-30 | 7859 | Brace bolt nut | 1932 to 1950--Servi-Cars | 2642-30 | Front rocker plate stud nut lock | 1930 to 1950--Solo, 1932 to 1940--Servi-Cars | 2642-31A | Rear rocker plate stud nut lock | 1941 to 1950 Servi-Cars, 1942 & 1943--model WLC | 2642-32A | 6404 | Tow bar end spring washer | 1939 to 1950 | 2642-40 | Front rocker plate stud nut lock | 1930 to 1950--Solo, 1932 to 1940--Servi-Cars | 2643-31 | Rocker plate stud nut, inside | 1941 to 1950 Servi-Cars, 1942 & 1943--model WLC | 2644-30 | 7863 | Bottom stud nut | 1929 to 1950 | 2644-41 | Rocker plate rear stud spacer (2) | 1941 to 1950--Servi-Cars, 1942 & 1943 model WLC | 2645-30 | Rocker plate stud bushing | 1941 to 1950 Servi-Cars, 1942 & 1943--model WLC | 2645-30A | Rocker plate stud bushing | 1930 to 1950--Solo, 1932 to 1940--Servi-Cars | 2646-32 | Rocker stud screw (2) | 1941 to 1950--Servi-Cars, 1942 & 1943 Model WLC | 2647-32 | Rocker stud screw lock (2) | 1941 to 1950--Servi-Cars, 1942 & 1943 Model WLC | 2651-40 | 45571-40 | Fork stem cap screw | 1940 to 1950 (without steering damper) | 27260-49 | 27260-49 | Throttle lever | 1949 to 1957--all twins (Carb. M-18, 36, 42, 45, 45A, 52, 54, 61, 74, 74B) | 27267-49 | 27267-49 | Throttle lever arm | 1949 to 1957--45" twins, 1953 & 1954--Servi-Cars (M-18, 42, 52, 54) | 275-42 | 22700-32 | Piston pin kit - standard | 1932 to 1950 | 275-42C | 22702-32 | Piston pin kit - .002" O.S. | 1932 to 1950 | 275-42D | 22704-32 | Piston pin kit - .004" O.S. | 1932 to 1950 | 275-42E | 22706-32 | Piston pin kit - .006" O.S. | 1932 to 1950 | 275-42F | 22708-32 | Piston pin kit - .008" O.S. | 1932 to 1950 | 275-42G | 22710-32 | Piston pin kit - .010" O.S. | 1932 to 1950 | 275-42H | 22712-32 | Piston pin kit - .012" O.S. | 1932 to 1950 | 275-42JA | 22714-32 | Piston pin kit - .015" O.S. | 1932 to 1950 | 2750-40 | Set of head cups, cones and bearings | 1940 to 1950 |
Part 2750-40 (Set of head cups, cones and bearings) consists of: | |||
0282: Ball, 5/16" steel ball | |||
2752-30: Head cup, upper and lower | |||
2754-40: Upper head cone | |||
2756-39: Lower head cone (race & body) | 2752-30 | Head cup, upper and lower | 1940 to 1950 | 2753-40 | Head cone bearing guard | 1940 to 1950 | 2754-40 | Upper head cone | 1940 to 1950 | 2756-39 | Lower head cone (race & body) | 1930 to 1950 | 2756-39A | Upper or lower head cone (race only) | 1939 to 1950 | 2759-36 | Upper head cone lock plate | 1940 to 1950 | 2759-40 | Handlebar and cone clamp nut | 1940 to 1950 | 2764-30 | Switch key (specify letter and number of lock) | 1937 to 1950 | 2776-40 | Steering damper assembly cpt. | 1940 to 1950 | 2778-36 | Steering damper lever | 1940 to 1950 | 2779-40 | Steering damper rod and friction plate | 1940 to 1950 | 2781-37 | Steering damper screw | 1937 to 1950 | 2782-39 | Steering damper rod plate | 1939 to 1950 | 2783-30 | Steering damper bakelite washer | 1930 to 1950 | 2784-30 | Adjusting washer | 1930 to 1950 | 2785-30 | Adjusting nut | 1930 to 1950 | 2787-30 | Release spring | 1930 to 1950 | 2790-30 | Fibre friction washer(2) | 1930 to 1950 | 2792-40 | Frame head bracket | 1940 to 1950 | 280-32 | Piston pin lock ring | 1932 to 1950 | 2801-41 | Frame (black) | 1941 to 1950--Servi-Cars | 2802-37 | Frame (black) | 1937 to 1940--Solo | 2802-41 | Frame (black) | 1941 to 1950-Solo | 2806-32 | Top motor mount | Cast iron heads: RL, WL, Servi-car 1932-1950. | 2806-40 | 16856-40 | Cylinder bracket | 1940 to 1946 WLD | 2806-40A | 16860-40 | Cylinder head bracket spacer (2) | 1940 to 1946 WLA, WLC & WLD | 2806-40M | 16855-40 | Cylinder bracket | 1940 to 1942 Model WLA | 2807-30 | 4620 | Brace bolt (2) | 1932 to 1950--Servi-Cars | 2818-26 | Luggage carrier (black) | 1929 to 1950 | 2820-26 | Luggage carrier stud | 1929 to 1941 | 2820-35 | Luggage carrier stud, right side | 1929 to 1941 | 2820-42 | Luggage carrier stud (2) | 1942 to 1950 | 2821-30 | 4634 | Tie bar clamp bolt | 1932 to 1950--Servi-Cars | 2823-26 | 4304 | Rear fender brace bolt (2) | 1929 to 1950 | 2827-30 | 41575-30 | Rear axle adjusting screw | 1930 to 1950--Solo | 2827-32 | 82906-32 | Rear axle adjusting screw (2) | 1932 to 1950--Servi-Cars | 283-32 | 24290-32 | Forked end connecting rod with bushings | 1940 to 1950--rear | 284-32 | 24294-32 | Single end connecting rod with bushings | 1940 to 1950--front | 289-32A | 24275-32 | Set connecting rods with rollers and crank pin | 1932 to 1950 | 29-29 | 16830-29 | Cylinder base stud (1-13/16") (8) | 1929 to 1950 | 2928-38 | Front footboard support rod | 1938 to 1950 | 2929-32 | Rear footboard support rod | 1932 to 1950 | 293-36 | 24331-36 | Piston pin bushing - standard (2) | 1936 to 1950 | 293-36A | 24332-36 | Piston pin bushing .010" O.S. | 1936 to 1950 | 2932-14 | 8038 | Footboard support rod nut, large | 1930 to 1950 | 2932-32 | Rear footboard support rod nut | 1932 to 1950 | 2932-38 | Front footboard support rod nut | 1938 to 1950 | 2934-39 | Right footboard sidebar | 1939 to 1950 | 2936-38 | Left footboard sidebar | 1938 to 1950 | 2936-47 | Left footboard sidebar | 1947 to 1950--Servi-Cars | 2938-40 | Footboard cpt. | 1940 to 1950 | 2940-40 | Footboard pad | 1940 to 1950 | 2940-40A | Set of footboard pads and rivets | 1940 to 1950 | 2941-14 | Footboard pad rivet | 1940 to 1950 | 2944-40 | Footboard hinge, right front and left rear (2) | 1940 to 1950 | 2944-40A | Footboard hinge, left front and right rear (2) | 1940 to 1950 | 2945-14 | Footboard hinge rivet | 1914 to 1950 | 2949-35 | Footboard stud (right front), 3-7/32" | 1935 to 1950 | 2950-35 | Footboard stud (left front), 2-5/8" (1) | 1935 to 1950 | 2951-24 | Footboard stud (left rear), 2-15/32" | 1930 to 1950 | 2951-35 | Footboard stud (right rear), 2-29/32" | 1935 to 1950 | 2952-35 | Footboard stud spacing washer (2) | 1935 to 1950 | 2954-14 | Footboard hinge bolt (4) | 1914 to 1950 | 2956-39 | 42401-39 | Footbrake lever | 1939 to 1950 | 2958-35 | 42280-35 | 1939-early 1940 rod lock clamp | 2958-39 | Brake lock assembly | 1939 to 1950--Servi-Cars | 2960-36 | 42430-36 | Brake lever stud | 1939 to 1950 | 2964-35 | 44484-35 | Brake lever spring | 1935 to 1950 | 3-36A | 16461-36 | Rear cylinder with piston assembly | 1936 to 1950--with iron heads | 3-40A | Rear cylinder with piston assembly | 1940 to 1946--WLD | 3001-40 | Front stand with fittings | 1940 to 1950 | 3006-36 | Front stand catch | 1940 to 1949 | 3006-50 | Front stand catch | 1950 | 301-29 | 24365-29 | Crank pin roller retainer | 1929 to 1950 | 3011-30 | Front stand collar | 1930 to 1950 | 304-15 | 9321 | Left bearing roller (24) 1/4" x .360" long - standard | 1930 to 1950 | 304-15D | 9322 | Left bearing roller .0002" O.S. | 1930 to 1950 | 304-15F | 9323 | Left bearing roller .0004" O.S. | 1930 to 1950 | 304-15KA | 9325 | Left bearing roller .0008" O.S. | 1930 to 1950 | 304-15MA | 9326 | Left bearing roller .001" O.S. | 1930 to 1950 | 305-15 | 9281 | Handlebar plunger Pin | 305-29 | 9241 | Crank pin roller, 1/4" x .550" long (12) - standard | 1929 to 1950 | 305-29D | 9242 | Crank pin roller, 1/4" x .550" long (12) - .0002" O.S. | 1929 to 1950 | 305-29F | 9243 | Crank pin roller, 1/4" x .550" long (12) - .0004" O.S. | 1929 to 1950 | 305-29H | 9244 | Crank pin roller, 1/4" x .550" long (12) - .0006" O.S. | 1929 to 1950 | 305-29KA | 9245 | Crank pin roller, 1/4" x .550" long (12) - .0008" O.S. | 1929 to 1950 | 305-29MA | 9246 | Crank pin roller, 1/4" x .550" long (12) - .001" O.S. | 1929 to 1950 | 3051-36A | Rear stand with fittings | 1936 to 1950 | 3060-38 | Stand shoulder bolt (2) | 1939 to 1950 | 30605-48 | 30605-48 | Set of breaker points | 1949 to 1957 -- all twins |
Part 30605-48 (Set of breaker points) consists of: | |||
32660-47: Contact point and support | |||
32661-47: Breaker point | 30606-47 | 32661-47 | Breaker point | 1949 & 1950 | 30609-47 | 32660-47 | Contact point and support | 1949 & 1950 | 3061-24 | Front stand spring | 1930 to 1950 | 3063-38 | Stand shoulder bolt washer (2) | 1939 to 1950 | 3067-36A | Stand catch | 1936 to 1950 | 30801-47 | 32726-47 | Condenser | 1948 & 1950 | 30803-47 | 32731-47 | Condenser bracket | 1949 & 1950 | 309-29 | 24370-29 | Set of rollers and retainers - standard | 1929 to 1950 | 309-29D | 24371-29 | Set of rollers and retainers - .0002" 0.S. O.S. | 1929 to 1950 | 309-29F | 24372-29 | Set of rollers and retainers - .0004" 0.S. O.S. | 1929 to 1950 | 309-29MA | 24375-29 | Set of rollers and retainers - .001" O.S. | 1929 to 1950 | 3101-26 | Seat bar bracket | 1929 to 1950 | 3103-29 | Seat bar plate | 1929 to 1950 | 3105-30 | Seat bar | 1937 to 1950 | 3110-37 | Set seat bar bushing | 1937 to 1950 | 3111-29 | Seat bar clevis pin | 1929 to 1950 | 3112-29 | Clevis pin spring | 1932 to 1950 | 3113-29 | 47581-29 | Seat post bushing | 1929 to 1950 | 3115-29 | Seat post plunger | 1929 to 1950 | 3117-29 | Plunger link | 1929 to 1950 | 3118-29 | Plunger link rivet | 1929 to 1950 | 3119-13 | Plunger link bushing | 1929 to 1950 | 3121-30 | Seat plunger assembly, std. (150 to 230 lbs ) | 1930 to 1950 | 3122-30 | Seat plunger assembly, 130 lbs. or less | 1930 to 1950 | 3123-30 | Seat plunger assembly, 130 to 150 lbs | 1930 to 1950 | 3124-30 | Seat plunger assembly, over 230 lbs | 1930 to 1950 | 3128-29 | Set of lower springs - std | 1929 to 1950 |
Part 3128-29 (Set of lower springs - std) consists of: | |||
3128-31: Cushion spring | |||
3129-31: Cushion spring (2-13/16") | |||
3138-31: Guide collar | 3128-29A | Set of lower springs - heavy | 1929 to 1950 |
Part 3128-29A (Set of lower springs - heavy) consists of: | |||
3128-31: Cushion spring | |||
3129-31A: Cushion spring and collar | |||
3138-29A: Cushion spring guide collar, 1-3/8" long (2) (for riders 230 lbs. and over) | 3128-31 | Cushion spring | 1929 to 1950 | 3128-31A | Set of seat post springs - cpt. | 1931 to 1950 |
Part 3128-31A (Set of seat post springs - cpt.) consists of: | |||
186-10: Seast post auxiliary spring (2-3/4") | |||
3128-31: Cushion spring | |||
3129-31: Cushion spring (2-13/16") | |||
3133-30: Seat post recoil spring | |||
3135-30: Seat post auxiliary spring (3") | 3129-31 | Cushion spring (2-13/16") | 1931 to 1950 | 3129-31A | Cushion spring and collar | 1929 to 1950 | 3133-30 | Seat post recoil spring | 1931 to 1950 | 3135-30 | Seat post auxiliary spring (3") | 1931 to 1950 | 3137-30 | Seat post rod | 1930 to 1950 | 3138-29A | Cushion spring guide collar, 1-3/8" long (2) (for riders 230 lbs. and over) | 1930 to 1950 | 3138-31 | Guide collar | 1929 to 1950 | 3141-29 | Plunger lock nut | 1929 to 1950 | 3143-25 | Seat post rod nut | 1925 to 1950 | 3144-25 | Rod lock nut | 1925 to 1950 | 3147-29A | Spring adjusting nut (13/16" O.D.) | 1929 to 1950 | 3181-25 | Saddle top (black), standard | 1925 to 1950 | 3181-47 | DeLuxe solo saddle | 1947 to 1950 | 3182-25 | Saddle pommel | 1925 to 1950 | 3187-34 | Front saddle bolt | 1934 to 1950 | 3205-34 | Rear saddle stud (2) | 1934 to 1950 | 3209-31 | Control bracket bolt spacer (2) | 1941 to 1950 | 32200-48 | 32200-48 | Spark plug rubber cover | 1948 to 1957 -- all twins | 3302-37 | Standard handlebars cpt. (Black) | 1940 to 1948 | 3302-37A | Speedster handlebar cpt. (Black) | 1940 to 1948 | 3302-40A | Speedster handlebar cpt. black, with crossbar | 3307-36 | Standard handlebar, bare (Black) | 1940 to 1948 | 3307-36A | Speedster handlebars, bare(Black) | 1940 to 1948 | 331-37 | 23901-37 | Set flywheels and shafts | 1937 to 1950 | 3310-35B | Handlebar grip - black (rubber) | 1935 to 1948 | 3311-35B | Pair of handlebar grips - black (plastic) | 1935 to 1948 | 3311-35C | Pair of handlebar grips - red (plastic) | 1935 to 1948 | 3311-35D | Pair of handlebar grips - yellow (plastic) | 1935 to 1948 | 3311-35E | Pair of handlebar grips - royal blue (plastic) | 1935 to 1948 | 3312-35 | Handlebar spiral (2) (for standard control) | 1935 to 1948 | 3312-35A | Handlebar spiral (2) | 1938 to 1948--(left hand throttle only) | 3316-36 | Handlebar plunger | 1940 to 1948 | 3316-36A | Handlebar plunger kit | 1940 to 1948 |
Part 3316-36A (Handlebar plunger kit) consists of: | |||
305-15: Handlebar plunger Pin | |||
3316-36: Handlebar plunger | |||
3320-10: Plain roller | |||
3321-31: Plain roller block | 3320-10 | Plain roller | 1940 to 1948 | 3321-31 | Plain roller block | 1940 to 1948 | 3321-31A | Roller block, oversize | 1931 to 1948 | 3322-31 | Control wire fastening screw (2) | 1931 to 1948 | 3324-09 | Control wire end (2) | 1911 to 1948 | 3326-09 | Control wire (2) | 1911 to 1948 | 3330-36 | Handlebar end nut (2) | 1940 to 1948 | 3332-36 | Control coil plug | 1932 to 1948 | 3333-31 | 56276-31 | Control coil plug set screw, 10-32 set screw with a slotted head | 1931 to 1950 | 3334-32 | Control coil and plug (2) | 1932 to 1948 |
Part 3334-32 (Control coil and plug (2)) consists of: | |||
3332-36: Control coil plug | 3344-26 | Control coil clamp (left) | 1929 to 1950 | 3345-26 | Control coil right clamp | WL, WLA, WLC, Servi-car 1929-1941, | 3370-36 | 27450-36 | Carburetor control connection | 1937 to 1950 | 3371-36A | Control bracket clamp | 1937 to 1946 (With iron heads) | 3371-37 | Carburetor control coil bracket cpt. | 1937 to 1946 (With iron heads) |
Part 3371-37 (Carburetor control coil bracket cpt.) consists of: | |||
0255: No. 12 x 11/32" x 3/64" lock washer | |||
3371-36A: Control bracket clamp | 338-32 | 23916-32 | Left flywheel only | 1932 to 1950 | 339-37 | 23936-37 | Right flywheel only | 1937 to 1950 | 3452-35A | Tool box (black) | 1935 to 1940 | 3452-40 | Tool box (black) | 1941 to 1950 | 3456-35 | Tool box cover | 1935 to 1940 | 3456-40 | Tool box cover | 1941 to 1950 | 3457-40 | Tool box mounting spacer | 1940 & 1941 | 3458-40 | 2424 | Tool box mounting screw | 1940 & 1941 | 3458-44 | Tool box mounting screw with lockwasher | All models 1944-up. UL, Knucklehead, Panhead, WL, WLA, Servi-car. | 3464-26 | Tool box key | 1930 to 1950 | 3467-35 | Tool box mounting bracket | 1935 to 1940 | 3467-41 | Tool box mounting bracket | 1941 to 1950 | 3475-36 | Lamp bracket bolt | 1940 to 1950 | 3475-46A | Spotlight fork bracket bolt nut | 1938 to 1950 | 3478-35 | Tool box screw washer | 1940 to 1950 | 348-29 | 23960-29 | Crank pin | 1929 to 1950 | 3500-47 | Set of tanks and fittings | 1947 and 1948 | 3500-49 | Set of tanks and fittings | 1949 | 3500-50 | Set of tanks and fittings | 1950 | 3501-40B | Right tank (oil) (Prime color) | 1940 | 3501-41B | Right tank (oil) (Prime color) | 1941 to 1946 | 3501-41F | Right oil tank | 1941 to 1946 | 3501-47B | Right tank (oil) (Prime color) | 1947 to 1950 | 3501-47C | Right oil tank | 1947 to 1950 | 3502-37B | Tank top filler strip | 1937 to 1950 | 3502-41B | Set of tanks and fittings | 1941 to 1946 | 3502-41E | Left gas tank | 1941 to 1946 | 3502-47B | Left gasoline tank (Prime color) | 1947 to 1950 | 3502-47C | Left gas tank | 1947 to 1950 | 3504-38C | 6700 | Drain plug gasket, 5/8" | 1938 to 1950 | 3505-37 | Oil tank gauge rod | 1937 to 1950 | 3505-37A | Tank buffer | 1937 to 1950 | 3507-36 | Tank cap, gas | 1937 to 1950 | 3507-37 | Oil tank decal | Servi-car, WL, WLA, WLC 1937-1973. | 3507-40 | Right tank name plate (chrome) | 1937 to 1946 | 3507-40A | Left tank name plate (chrome) | 1937 to 1946 | 3507-40H | Set of gas tank name plates with fittings (chrome) | 1937 to 1946 |
Part 3507-40H (Set of gas tank name plates with fittings (chrome)) consists of: | |||
3507-40: Right tank name plate (chrome) | |||
3507-40A: Left tank name plate (chrome) | |||
3507-41: Tank name plate gasket | |||
3508-40: Tank name plate screw | |||
3508-40A: Tank name plate bracket | |||
3508-40B: Tank name plate screw lock washer | 3507-41 | Tank name plate gasket | 1937 to 1946 | 3507-47 | Gas tank name plate - R.H. | 1947 to 1950 | 3507-47A | Gas tank name plate - L.H. | 1947 to 1950 | 3507-47B | Set of gas tank name plates | 1947 to 1950 |
Part 3507-47B (Set of gas tank name plates) consists of: | |||
3507-47: Gas tank name plate - R.H. | |||
3507-47A: Gas tank name plate - L.H. | 3507-47C | Gas tank name plate gasket (2) | 1947 to 1950 | 3508-40 | Tank name plate screw | 1937 to 1946 | 3508-40A | Tank name plate bracket | 1937 to 1946 | 3508-40B | Tank name plate screw lock washer | 1937 to 1946 | 3508-47 | Tank name plate bracket - R.H. | 1947 to 1950 | 3508-47D | Tank name plate bracket - L.H. | 1947 to 1950 | 3509-36 | Tank cap washer | 1937 to 1950 | 3509-36A | Tank cap washer, leather | 1937 to 1950 | 3514-41 | Front tank strip | 1937 to 1946 | 3514-41A | Rear tank strip | 1937 to 1946 | 3514-41B | Rear tank strip bracket | 1937 to 1946 | 3514-41C | Front tank strip bracket | 1937 to 1946 | 3514-41D | Set of tank strips with attaching brackets | 1937 to 1946 |
Part 3514-41D (Set of tank strips with attaching brackets) consists of: | |||
3514-41: Front tank strip | |||
3514-41A: Rear tank strip | |||
3514-41B: Rear tank strip bracket | |||
3514-41C: Front tank strip bracket | 352-29 | 24000-29 | Sprocket shaft | 1929 to 1950 | 3529-37 | 4060 | Gas and oil tank mounting bolt(3) | 1937 to 1950 | 3532-18 | 3665 | Top of tank screw | 1937 to 1950 | 3533-18 | Tank screw spring washer | 1938 to 1950 | 3534-34 | 6207 | Tank screw paper washer | 1937 to 1950 | 355-37 | 24005-37 | Gear shaft | 1937 to 1950 | 355-37B | 24699-37 | Seal ring spring | 1937 to 1950 | 355-39 | 24696-39 | Gear shaft bearing seal ring | 1939 to 1950 | 3563-12 | Push rod oil seal leather cup | 1941 | 357-26A | 24060-26 | Cpt. assortment, 10 flywheel thrust collars | 1929 to 1950 | 357-26B | 24063-26 | thrust collars .066" | 1929 to 1950 | 357-26C | 24066-26 | thrust collars .070" | 1929 to 1950 | 357-26D | 24068-26 | thrust collars .074" | 1929 to 1950 | 357-26E | 24070-26 | thrust collars .078" | 1929 to 1950 | 357-26F | 24073-26 | thrust collars .082" | 1929 to 1950 | 357-26G | 24075-26 | thrust collars .086" | 1929 to 1950 | 357-26H | thrust collars .090" | 1929 to 1950 | 357-26JA | 24079-26 | thrust collars .094" | 1929 to 1950 | 357-26KA | 24082-26 | thrust collars .098" | 1929 to 1950 | 357-26LA | 24084-26 | thrust collars .102" | 1929 to 1950 | 3571-37E | Motor oil pump feed line | 1937 to 1950 | 3571-38E | Motor oil pump return line | 1938 to 1950 | 3572-36A | Nipple for oil tank vent line | 1937 to 1950 | 3572-36B | Nipple bolt for oil tank vent line | 1937 to 1950 | 3572-36C | 6440 | Nipple packing washer | 1938 to 1950 | 3572-37B | Oil tank vent line | 1937 to 1950 | 3575-38 | Rear chain oiler line | 1938 to 1940--Servi-Cars | 3575-41 | Rear chain oiler line | 1941 to 1950--Servi-Cars | 3576-38 | Rear chain oiler line bushing | 1938 to 1950--Servi-Cars | 3577-15 | 63533-15 | Nipple for oil pump feed line | 1938 to 1950 | 3607-40A | Gas line | 1940 & 1941 | 3607-41M | Gas line | 1942 to 1949 | 361-12 | 23985-12 | Shaft key for sprocket and gear shaft (2) | 1912 to 1950 | 3612-39 | Strainer and gas line nut | 1939 to 1949 | 3613-39 | 62271-39 | Gas strainer sealing washer | 1939 to 1941 | 3614-39 | 62268-39 | Gas strainer cap | 1939 to 1941 | 3615-15 | Nipple for gas line (rear end) and vent and rocker arm oillines | 1915 to 1950 | 3615-36 | 25235-36 | Crankcase oil tank vent pipe nipple | 1936 to 1950 | 3623-39 | Gas strainer cpt. | 1939 to 1941 |
Part 3623-39 (Gas strainer cpt.) consists of: | |||
1285-33: Inlet nipple washer | |||
3527-39: | |||
3613-39: Gas strainer sealing washer | |||
3614-39: Gas strainer cap | |||
3624-39: Gas strainer base | 3623-41M | Gas strainer cpt. | 1942 to 1949 |
Part 3623-41M (Gas strainer cpt.) consists of: | |||
3624-41M: Gas strainer base | |||
3627-32: Gas strainer screen | |||
3629-32: Gas strainer cap | |||
3633-32: Gas strainer washer | 3624-39 | 62253-39 | Gas strainer base | 1939 to 1941 | 3624-41M | Gas strainer base | 1942 to 1949 | 3627-32 | Gas strainer screen | 1942 to 1950 | 3627-39 | 62265-39 | Gas strainer screen | 1939 to 1941 | 3629-32 | Gas strainer cap | 1942 to 1949 | 3633-32 | Gas strainer washer | 1942 to 1950 | 3633-40 | Tank shut-off rod | 1940 to 1950 | 3634-40 | Shut-off upper seal | 1940 to 1950 | 3635-40 | 6307 | Shut-off rod washer | 1940 to 1950 | 3636-40 | Shut-off seal cap | 1940 to 1950 | 3637-40 | Shut-off operating knob | 1940 to 1950 | 3638-40 | Shut-off rod seat washer (2) | 1940 to 1950 | 3639-40 | Shut-off rod seat | 1940 to 1949 | 3639-50 | Shut-off rod seat | 1950 | 364-12 | Main shaft sprocket nut | 1929 to 1940 | 364-29 | 7974 | Gear and sprocket shaft nut (2) | 1929 to 1950 | 364-37 | 8010 | Crank pin nut (2) | 1937 to 1950 | 3640-40 | Shut-off rod spacer | 1940 to 1950 | 368-12 | 23982-12 | Crank pin nut lock washer | 1929 to 1950 | 37-09B | Spark plug (No. 2) | 1927 to 1950 | 37-09C | Spark plug (No. 3) | 1927 to 1950 | 37-09D | Spark plug (No. 4) | 1927 to 1950 | 37-09E | Spark plug (No. 5) racing | 1927 to 1950 | 3702-40 | Front fender less flap (Prime color) | 1940 to 1949--solo; 1940--Servi-cars | 3703-36 | Front fender less flap (Prime color) | 1941 to 1949--Servi-cars | 3710-39 | Rear fender and braces (Prime color) | 1939 & 1940 | 3710-41 | Rear fender and braces (Prime color) | 1941 to 1949 | 3712-39 | Rear fender hinged end (Prime color) | 1939 to 1949 | 3715-39 | Set of fender side strips complete | 1940 to 1949 |
Part 3715-39 (Set of fender side strips complete) consists of: | |||
3761-39: Front fender front end side strip | |||
3761-39A: Front fender rear end side strip - R.H. | |||
3761-39B: Front fender rear end side strip - L.H. | |||
3762-39: Rear fender front end side strip | |||
3762-39A: Rear fender rear end side strip - R.H. | |||
3762-39B: Rear fender rear end side strip - L.H. | |||
3765-39: Fender side strip fastening clip | 3715-40 | Set of fender top strips and Chevron complete | 1940--except Servi-cars |
Part 3715-40 (Set of fender top strips and Chevron complete) consists of: | |||
3715-40A: Front fender front top strip - 4" | |||
3715-40B: Front fender top center strip - 6-1/2" | |||
3719-40A: Rear fender top center strip | |||
3719-40B: Rear fender top strip | |||
3720-40: Fender chevron | |||
3765-40: Front fender top strip clips | |||
3765-40A: Rear fender top strip clips | 3715-40A | Front fender front top strip - 4" | 1940--except Servi-cars | 3715-40B | Front fender top center strip - 6-1/2" | 1940--except Servi-cars | 3716-39 | Set of front fender side strips complete | 1940 to 1949 | 3717-39 | Set of rear fender side strips complete | 1939 to 1949--except Servi-cars |
Part 3717-39 (Set of rear fender side strips complete) consists of: | |||
3762-39: Rear fender front end side strip | |||
3762-39A: Rear fender rear end side strip - R.H. | |||
3762-39B: Rear fender rear end side strip - L.H. | |||
3765-39: Fender side strip fastening clip | 3718-40 | Set of front fender top strips and Chevron complete | 1940--except Servi-Cars |
Part 3718-40 (Set of front fender top strips and Chevron complete) consists of: | |||
3715-40A: Front fender front top strip - 4" | |||
3715-40B: Front fender top center strip - 6-1/2" | |||
3720-40: Fender chevron | |||
3765-40: Front fender top strip clips | |||
3765-40A: Rear fender top strip clips | 3719-40 | Set of rear fender top strips | 1940-except Servi-Cars |
Part 3719-40 (Set of rear fender top strips) consists of: | |||
3719-40A: Rear fender top center strip | |||
3719-40B: Rear fender top strip | |||
3765-40: Front fender top strip clips | |||
3765-40A: Rear fender top strip clips | 3719-40A | Rear fender top center strip | 1940--except Servi-cars | 3719-40B | Rear fender top strip | 1940--except Servi-cars | 372-21 | 23972-21 | Flywheel steel washer (2) | 1936 to 1950 | 3720-40 | Fender chevron | 1940--except Servi-Cars | 3726-36 | Front fender brace, upper | 4941 to 1949--Servi-Cars | 3726-40 | Front fender brace, upper | 1940 to 1949--solo | 3727-36 | Front fender brace, lower | 1941 to 1949--Servi-Cars | 3727-40 | Front fender brace, lower | 1940 to 1949--solo | 3730-36 | Front fender brace clip (2) | 1940 to 1949 | 3732-34 | Brace clip lock, left | 1940 to 1950 | 3732-34A | Brace clip lock, right | 1940 to 1950 | 3736-41 | Rear fender brace, top | 1941 to 1950 | 3737-36 | Rear fender end brace (2) | 1941 to 1950 | 3741-34 | Rear fender end brace bracket | 1934 to 1950 | 3743-23 | 5425 | Brace bracket bolt (2) | 1923 to 1950 | 3746-29 | Rear fender brace clip, left | 1929 to 1950 | 3746-36A | Rear fender brace clip. right | 1929 to 1950 | 3748-26 | 4013 | Control coil bracket bolt (2) | 1941 to 1950 | 3749-30 | 2404 | Front fender oval head bolt (2)1940 to 1950 | 3751-39 | Rear fender end hinge with fittings | 1939 to 1947 | 3751-48 | Rear fender end hinge with fittings | 1948 to 1950 | 3752-30 | Fender hinge pin | 1930 to 1950 | 3757-26 | Front fender flap | 1940 to 1949 | 3761-39 | Front fender front end side strip | 1940 to 1949 |
Part 3761-39 (Front fender front end side strip) consists of: | |||
3761-39: Front fender front end side strip | |||
3761-39A: Front fender rear end side strip - R.H. | |||
3761-39B: Front fender rear end side strip - L.H. | |||
3765-39: Fender side strip fastening clip | 3761-39A | Front fender rear end side strip - R.H. | 1940 to 1949 | 3762-39 | Rear fender front end side strip | 1939 to 1949--except Servi-cars | 3762-39A | Rear fender rear end side strip - R.H. | 1939 to 1949--except Servi-cars | 3765-39 | Fender side strip fastening clip | 1939 to 1949--except Servi-cars | 3765-40 | Front fender top strip clips | 1940--except Servi-cars | 3765-40A | Rear fender top strip clips | 1940--except Servi-cars | 3801-32 | Front chain outer guard | 1932 to 1950 | 3804-32 | Chain guard back, upper | 1932 to 1940 | 3804-41 | Front chain guard back | 1941 to 1950 | 3805-30A | 2398 | Screw for front chain guard back | 1932 to 1950 | 3805-30B | Front chain guard screw lock | 1937 to 1950 | 3805-32 | Chain guard back, lower | 1932 to 1940 | 3805-39 | Screw plug | 1939 to 1950 | 3806-41 | Front chain guard back rear bracket | 1941 to 1950 | 3807-26 | Front outer chain guard rear bracket | 1929 to 1950 | 3811-29 | Front chain guard inspection hole cover (2) | 1930 to 1950 | 3812-29 | Chain guard back slot cover | DL, RL, WL, Servi-car 1929-1940. | 3813-29 | Chain guard bracket bolt | DL, RL, WL, Servi-car 1929-1940. | 3814-29 | Front chain guard bolt spring | 1929 to 1950 | 3815-29 | Spring washer | DL, RL, WL, Servi-car 1929-1940. | 3817-40 | Rear chain guard, outer | 1940 to 1950--Servi-Cars | 3818-36 | Rear chain guard | 1936 to 1950--solo | 3818-40 | Rear chain guard, inner | 1940--Servi-Cars | 3819-40 | Rear chain guard extension plate | 1940--Servi-Cars | 3820-41 | Rear chain guard front strap | 1941 to 1950--Servi-Cars | 39-26 | Terminal nut for 37-09 B, C, D, E | 1927 to 1950 | 3901-30 | 43503-30 | Front wheel with brake shell, less tire, 18" rim | 1930 to 1940--1941 to 1950--solo | 3901-40 | 43509-40 | Front wheel with brake shell, less tire, 16" rim | 1940, 1941 to 1950--solo | 3906-30 | Front hub cpt. with brake shell | 1930 to 1940--1941 to 1950--solo | 3909-30 | Front hub and brake shell | 1930 to 1940--1941 to 1950--solo | 3910-30 | 43871-30 | Front wheel axle | 1930 to 1940, 1941 to 1950--solo | 3910-37 | 7811 | Front axle nut (2) | 1937 to 1940, 1941 to 1950--solo | 3910-40 | Front axle set, with bearing and cones | 1930 to 1940, 1941 to 1950--solo |
Part 3910-40 (Front axle set, with bearing and cones) consists of: | |||
0282: Ball, 5/16" steel ball | |||
3910-30: Front wheel axle | |||
3921-30: Front wheel axle | |||
3923-30: Front wheel hub adjusting cone assembly | |||
3925-30: Front wheel hub bear ing cone spring rings | |||
3926-30: Hub bearing cone lock washer | |||
3929-30: Hub bearing cone lock nut | 3912-43 | 43638-43 | Front wheel hub grease distributor | 1943 to 1950--solo | 3921-30 | Front wheel axle | 1930 to 1940, 1941 to 1950--solo | 3923-30 | 43624-30 | Front wheel hub adjusting cone assembly | 1930 to 1940--1941 to 1950--solo |
Part 3923-30 (Front wheel hub adjusting cone assembly) consists of: | |||
3926-30: Hub bearing cone lock washer | |||
3928-44: Hub bearing cone oil seal | |||
3928-44A: Hub bearing cone oil seal retainer | |||
3929-30: Hub bearing cone lock nut | 3925-30 | 43630-30 | Front wheel hub bear ing cone spring rings | 1930 to 1940, 1941 to 1950--solo | 3926-30 | 43635-30 | Hub bearing cone lock washer | 1930 to 1940--1941 to 1950--solo | 3928-44 | 43632-44 | Hub bearing cone oil seal | 1930 to 1940--1941 to 1950--solo | 3928-44A | 43633-44 | Hub bearing cone oil seal retainer | 1930 to 1940--1941 to 1950--solo | 3929-30 | 43885-30 | Hub bearing cone lock nut | 1930 to 1940--1941 to 1950--solo | 3932-30 | 43640-30 | Left inner dirt guard | 1930 to 1940--1941 to 1950--solo | 3935-30 | 43645-30 | Spoke flange, right side | 1930 to 1940--1941 to 1950--solo | 3940-35 | 43004-35 | Rim, 18" drop center | 1935 to 1950--rear only | 3940-35C | Rim, 18" drop center - chrome (when available) | 1935 to 1950--rear only | 3940-40 | 43006-40 | Rim, 16" drop center | 1940 to 1950-rear only | 3940-40A | 43008-40 | Rim, 16" | 1940--Servi-car front wheel; 1940 to 1950--solo, front wheel only | 3940-40AC | 43009-40 | Rim, 16" - chrome (when available) | 1940--Servi-car front wheel; 1940 to 1950--solo, front wheel only | 3940-40C | 43007-40 | Rim, 16" drop center - chrome (when available) | 3941-30 | 43002-30 | Rim, 18" drop center | 1932 to 1940--Servi-Cars front wheel; 1930 to 1950--solo, front wheel only | 3941-30C | 43003-30 | Rim, 18" - chrome (when available) | 1932 to 1940--Servi-Cars front wheel; 1930 to 1950--solo, front wheel only | 3943-30 | 43028-30 | Spokes - 8-3/8" | 1932 to 1940--Servi-Cars; 1930 to 1950--solo | 3943-36 | 43031-36 | Spokes | 1937 to 1950 | 3943-36A | 43030-36 | Complete set of spokes and nipples for 18" rear wheel | 1937 to 1950 |
Part 3943-36A (Complete set of spokes and nipples for 18" rear wheel) consists of: | |||
3943-36: Spokes | |||
3947-29: Nipples | 3943-40 | 43032-40 | Spokes | 1940 to 1950 | 3943-40A | 43033-40 | Complete set of spokes and nipples for 16" rear wheel | 1940 to 1950 |
Part 3943-40A (Complete set of spokes and nipples for 16" rear wheel) consists of: | |||
3943-40: Spokes | |||
3947-29: Nipples | 3944-40 | 43034-40 | Spokes - 4-11/16" | 1940--all models; 1941 to 1950--solo only | 3944-40A | 43035-40 | Spokes - 6-7/8" | 1940--all models; 1941 to 1950--solo only | 3945-30 | 43027-30 | Spokes - 5-15/16" | 1932 to 1940--Servi-Cars; 1930 to 1950--solo | 3945-30A | 43029-30 | Complete set of spokes and nipples for 18" front wheel | 1932 to 1940--Servi-Cars; 1930 to 1950--solo |
Part 3945-30A (Complete set of spokes and nipples for 18" front wheel) consists of: | |||
3943-30: Spokes - 8-3/8" | |||
3945-30: Spokes - 5-15/16" | |||
3947-16: Nipples | 3945-40A | 43036-40 | Complete set of spokes and nipples for 16" front wheel | 1940--all models; 1941 to 1950--solo only |
Part 3945-40A (Complete set of spokes and nipples for 16" front wheel) consists of: | |||
3944-40: Spokes - 4-11/16" | |||
3944-40A: Spokes - 6-7/8" | |||
3947-35: Nipples | 3947-16 | Nipples | 1932 to 1940--Servi-Cars; 1930 to 1950--solo | 3947-29 | 43099-29 | Nipples | 1937 to 1950 | 3947-35 | Nipples | 1940--all models; 1941 to 1950--solo only | 3951-36 | 40978-36 | Wheel cpt., less tire (18") | 1935 to 1950 | 3951-40 | 40981-40 | Wheel cpt., less tire (16") | 1935 to 1950 | 3951-40C | 40982-40 | Spare wheel cpt. less tire - chrome rim (when available) | 1935 to 1950 | 3958-36 | Hub assembled | 1937 to 1950 | 3960-36 | 43546-36 | Hub shell only | 1937 to 1950 | 3963-35 | 43550-35 | Roller bearing sleeve | 1937 to 1950 | 3965-35 | 43554-35 | Thrust washer retaining lock ring (2 per hub) | 1937 to 1950 | 3966-39 | 43558-39 | Roller bearing thrust washer (brake side) | Later 1939 to 1950 | 3967-35 | 43578-35 | Roller retainer (large) (brake side) | 1937 to 1950 | 3968-35 | 43571-35 | Cork washer (large) (brake side) | 1937 to 1950 | 3970-35 | 43564-35 | Cork washer retainer (brake side) | 1937 to 1950 | 3972-35 | 43566-35 | Outer thrust bearing cover | 1937 to 1950 | 3974-35 | 43574-35 | Inner thrust bearing cover | 1937 to 1950 | 3975-35 | 43576-35 | Inner thrust bearing gasket | 1937 to 1950 | 3976-35 | 43570-35 | Cork washer (small) | 1937 to 1950 | 3978-35 | 43556-35 | Thrust bearing sleeve | 1937 to 1950 | 3980-35 | 43560-35 | Thrust adjusting shim washer (.002")(3 to 12 per hub) | 1937 to 1950 | 3981-39 | 43561-39 | Inside hub bearing thrust collar | 1939 to 1950 | 3982-35 | 43563-35 | Thrust washer, thick (2 per hub) | 1937 to 1950 | 3982-39 | 43552-39 | Small retainer thrust washer | 1939 to 1950 | 3995-35 | Rear axle | RL, WL 1935-1940. | 3995-41 | 41551-41 | Rear axle | 1941 to 1950--solo | 40-08 | Spark plug gasket | 1927 to 1950 | 4001-35 | 41598-35 | Rear wheel axle spacer | 1935 to 1950--solo | 4004-35 | Axle sleeve | RL, WL 1935-1940. | 4004-41 | 41718-41 | Rear wheel axle sleeve | 1941 to 1950--solo | 4005-35 | 8056 | Rear wheel axle sleeve nut | 1935 to 1950--solo | 4006-35 | 41603-35 | Rear wheel axle nut lock washer | 1935 to 1950--solo | 4007-38 | 41593-38 | Rear wheel axle spacer (left or right side) | Later 1938 to 1950--solo | 4026-35 | 43530-35 | Wheel mounting socket screw (5 per wheel) | 1937 to 1950 | 4026-35S | 43531-35 | Wheel mounting socket screw oversize | 1937 to 1950 | 4029-37A | Rear brake assembly cpt | 1937 to 1940--solo | 4029-41 | 41647-41 | Rear brake assembly cpt | 1941 to 1950--solo | 403-37 | 24511-37 | Set of matched crank cases | 1937 to 1950 | 4032-37 | Brake shell and sprocket assembly | 1937 to 1940--solo | 4032-37A | Brake shell, less sprocket | WL, WLA 1937-1940. | 4032-41 | 41401-41 | Brake shell and sprocket assembly | 1941 to 1950--solo | 4032-41A | 41402-41 | Brake shell (less sprocket) | 1941 to 1950--solo | 4034-35 | 41421-35 | Rear brake shell splash ring | 1935 to 1950--45" except Servi-cars | 4035-37 | 41425-37 | Brake Shell dowel pin (5) | 1937 to 1950--solo | 4036-37A | 41652-37 | Brake side cover | 1937 to 1950--solo | 4037-35 | 41716-35 | Rear brake arm anchor stud | 1935 to 1950--solo | 4040-36A | 44402-36 | Set of brake shoes and linings | 1941 to 1950--Servi-Cars | 4040-48 | 41807-48 | Set of rear brake shoes and linings | 1948 to 1950--Servi-Cars | 4041-41 | 41806-41 | Set of brake shoes and linings | 1941 to 1950--solo | 4043-48 | 41853-48 | Set of rear brake linings and rivets | 1948 to 1950--Servi-Cars | 4046-31 | 41841-31 | Brake lining rivet | 1935 to 1950--solo | 4054-35 | 41670-35 | Brake operating shaft | 1935 to 1950--solo | 4055-31 | 41691-31 | Brake operating shaft spring washer | 1941 to 1950--Servi-Cars | 4056-35 | Brake operating lever | RL, WL 1935-1940. | 4056-41 | 41925-41 | Brake operating lever | 1941 to 1950--solo | 4058-41 | 41876-41 | Brake shoe pivot stud | 1941 to 1950--solo | 4059-35 | 44475-35 | Brake shoe pivot stud plate | 1941 to 1950--Servi-Cars | 4065-35 | 42258-35 | Rear brake rod | 1935 to 1950--solo | 4067-30 | 42273-30 | Rear brake rod clevis | 1935 to 1950--solo | 4069-26 | 490 | Clevis pin | 1928 to 1950 | 4073-39 | 42330-39 | Rear wheel brake foot pedal rod with fittings | 1939 to 1950--solo | 4075-35 | 42566-35 | Rear brake rod shaft lever | 1935 to 1950--solo | 4098-36 | 44113-36 | Front brake shell | 1941 to 1950--Servi-Cars | 410-37A | 24556-37 | Right crank case | 1937 to 1950 | 4108-31A | Front brake side cover | 1931 to 1940--solo | 4108-41 | 44145-41 | Front brake side cover | 1941 to 1950--solo | 4108-41A | 44146-41 | Front brake side cover | 1941 to 1950--Servi-Cars | 4109-36 | 44182-36 | Brake side hub washer, steel | 1941 to 1950--Servi-Cars | 4109-36A | 44183-36 | Brake side hub washer, cork | 1941 to 1950--Servi-Cars | 4109-36B | 44186-36 | Brake side plate spring | 1941 to 1950--Servi-Cars | 411-37 | 24975-37 | Crankcase oil strainer | 1937 to 1950 | 411-37A | 333 | Oil strainer retaining pin 1/8" x 1-3/4" | 1937 to 1950 | 4110-30 | 44122-30 | Front brake shell | 1930 to 1940, 1941 to 1950--solo | 4111-31 | 44406-31 | Upper brake shoe and lining | 1931 to 1940 | 4112-31 | 44405-31 | Lower brake shoe and lining | 1931 to 1940 | 4112-40 | 44402-40 | Set of brake shoes and linings | 1931 to 1940, 1941 to 1950--solo | 4114-35 | 44427-35 | Set front brake linings and rivets | 1936 to 1940, 1941 to 1950--solo | 4114-39 | 44433-39 | Set front brake linings and rivets | 1941 to 1950--Servi-Cars | 4114-41 | 41849-41 | Set brake linings and rivets | 1941 to 1950--solo | 4115-35 | Set brake linings and rivets | 1936 to 1940--solo | 4117-30 | 44340-30 | Stabilizer center plate | 1930 to 1940, 1941 to 1950--solo | 4118-29 | 44348-29 | Stabilizer spring washer (1) | 1930 to 1950--solo | 4118-36 | 44449-36 | Brake shoe pivot stud | 1941 to 1950--Servi-Cars | 4119-29 | 44344-29 | Stabilizer inner washer | 1930 to 1950--solo | 4119-35 | 44476-35 | Brake shoe pivot stud plate | 1935 to 1950--solo | 4120-29 | 44346-29 | Stabilizer outer washer | 1930 to 1950--solo | 4121-29 | 44342-29 | Stabilizer cover | 1930 to 1950--solo | 4122-30 | 44350-30 | Stabilizer collar stud (2) | 1930 to 1950--solo | 4123-31 | 44307-31 | Brake operating lever | 1937 to 1940, 1941 to 1950--solo | 4123-36 | 44308-36 | Brake operating lever | 1941 to 1950--Servi-Cars | 4124-31 | 44265-31 | Brake operating stud | 1937 to 1940, 1941 to 1950--solo | 4124-36A | Brake operating shaft washer | 1941 to 1950--Servi-Cars | 4124-38A | 44231-38 | Brake operating stud nipple extension | 1937 to 1940, 1941 to 1950--solo | 4125-28A | 44486-28 | Brake shoe spring (2) | 1929 to 1940, 1941 to 1950--solo | 413-39A | 24585-39 | Right crank case bushing | 1939 to 1950 | 413-39AB | Right crankcase bushing 002" O.S. | 1939 to 1950 | 413-39AC | 24587-39 | Right crankcase bushing 005" O.S. | 1939 to 1950 | 4130-40 | 44211-40 | Front brake shackle | 1940 to 1950--solo; 1940--Servi-Car | 4130-40A | 44210-40 | Front brake shackle | 1941 to 1950--Servi-Cars | 4131-28 | 44223-28 | Brake shackle bushing (2) | 1940 to 1950 | 4133-36 | 44226-36 | Front brake shackle fork stud | 1940 to 1950 | 4133-40 | 44229-40 | Front brake shackle stud lock washer | 1940 to 1950 | 4137-30 | 44225-30 | Front brake shackle side cover stud | 1940 to 1950 | 414-37 | 24670-37 | Gear side bearing cpt. - standard | 1937 to 1950 | 414-37D | 24671-37 | Gear side bearing complete .0002" O.S. | 1937 to 1950 | 414-37F | 24672-37 | Gear side bearing complete .0004" O.S. | 1937 to 1950 | 414-37KA | 24674-37 | Gear side bearing complete .0008" O.S. | 1937 to 1950 | 414-37MA | 24675-37 | Gear side bearing complete .001" O.S. | 1937 to 1950 | 414-39A | Gear side bearing washer | 1939 to 1950 | 4140-29 | 44250-29 | Stabilizer center plate nipple extension | 1930 to 1950--solo | 4140-39 | 45102-39 | Control coil oil cup kit | 1939 to 1950 |
Part 4140-39 (Control coil oil cup kit) consists of: | |||
0105A: 10-32 N.F. x 1/8" x 3/8" hexagon nut | |||
035: 10-32 N.F. x 3/8" fillister head screw | |||
4141-39: Control coil oil cup body | |||
4142-39: Control coil oil cup plunger | |||
4142-39A: Control coil oil cup spring | 4141-39 | 45103-39 | Control coil oil cup body | 1939 to 1950 | 4142-39 | 45105-39 | Control coil oil cup plunger | 1939 to 1950 | 4142-39A | 45107-39 | Control coil oil cup spring | 1939 to 1950 | 4143-30 | 45085-30 | Control coil assembly | Later 1930 to 1950 | 4144-30 | 45109-30 | Control coil ferrule (2) | Later 1930 to 1950 | 4144-30A | Felt washer packing nut | All models late 1930-1940, incl. WLA. DL, RL, WL, Servi-car, VL, UL,, Knucklehead. | 4144-30B | Felt washer | Later 1930 to 1940 | 4144-41 | 45111-41 | Felt packing washer | 1941 to 1950 | 4145-28 | Control wire | 1930 to 1940 | 4146-15 | 45158-15 | Control wire end | 1930 to 1940 | 4149-28 | Hand lever and bracket cpt. | 1928 to 1940 | 4149-41 | 45002-41 | Brake hand lever and bracket complete | 1941 to 1950 | 415-37 | 24645-37 | Right roller bearing retainer (2) | 1937 to 1950 | 4150-28 | Brake hand lever | 1928 to 1940 | 4150-41 | 45017-41 | Hand lever only | 1941 to 1950 | 4151-28 | Hand lever bracket | Singles, DL, VL, RL, WL, Servi-car, UL, Knucklehead 1928-1940. | 4151-41 | 45023-41 | Hand lever bracket | 1941 to 1950 | 4152-41 | 45033-41 | Hand lever clamp bushing | 1941 to 1948 | 4152-49 | 45033-49 | Hand lever clamp bushing | 1949 & 1950 | 4153-28 | 45030-28 | Bracket clamp | 1930 to 1940, 1942 & 1943 model WLC | 4154-28 | Bracket clamp screw | Singles, DL, VL, RL, WL, Servi-car, UL, Knucklehead 1928-1940. | 4156-28 | Hand lever screw | Singles, DL, VL, RL, WL, Servi-car, UL, Knucklehead 1928-1940. | 4156-41 | 45031-41 | Hand lever pivot screw | 1941 to 1950 | 4157-28 | Spring washer, screw | Singles, DL, VL, RL, WL, Servi-car, UL, Knucklehead 1928-1940. | 416-39 | 24610-39 | Left roller bearing bushing with fittings | 1939 to 1950 |
Part 416-39 (Left roller bearing bushing with fittings) consists of: | |||
421-39: Sprocket shaft bearing end | |||
422-39: Sprocket shaft bearing washer | |||
423-39: Sprocket shaft bearing spring ring | 4160-28 | 9980 | Handlebar clip | 1930 to 1950 | 4162-30 | 9967 | Control coil clip | 1930 to 1950 | 4162-36 | 9968 | Coil clip, to fork | 1937 to 1950 | 4163-40 | 9974 | Control coil clamp | 1940 to 1950 | 4165-28 | 38674-28 | Control coil adjusting sleeve | 1930 to 1950 | 4165-41 | 45162-41 | Control coil adjusting screw | 1941 to 1950 | 4166-28 | 7827 | Adjusting sleeve nut | 1930 to 1950 | 417-29 | 24720-29 | Left roller bearing retainer (2) | 1929 to 1950 | 417-30 | 24721-30 | Roller retainer, small | 1937 to 1950 | 4170-28 | 45172-28 | Control wire lower connection | 1928 to 1950 | 4171-29 | 45182-29 | Lower connection clamp nut | 1929 to 1950 | 4176-36 | 43872-36 | Front axle | 1941 to 1950--Servi-Cars | 4178-30 | Front axle nut | 1941 to 1950--Servi-Cars | 4180-36 | 43884-36 | Front axle spacer | 1941 to 1950--Servi-Cars | 419-29 | 24730-29 | Sprocket shaft bearing cpt. - standard | 1929 to 1950 | 419-29D | 24731-29 | Sprocket shaft bearing .0002" O.S. | ]929 to 1950 | 419-29F | 24732-29 | Sprocket shaft bearing .0004" O.S. | ]929 to 1950 | 419-29H | 24733-29 | Sprocket shaft bearing .0006" O.S. | ]929 to 1950 | 419-29KA | 24734-29 | Sprocket shaft bearing .0008" O.S. | ]929 to 1950 | 419-29MA | 24735-29 | Sprocket shaft bearing .001" O.S. | ]929 to 1950 | 421-39 | 24775-39 | Sprocket shaft bearing end | 1939 to 1950 | 422-39 | 24691-39 | Sprocket shaft bearing washer | 1939 to 1950 | 423-39 | 24701-39 | Sprocket shaft bearing spring ring | 1939 to 1950 | 4303-29A | HM5 battery, fully charged with terminal fittings | 1937 to 1950 | 4304-41 | HM5 battery, dry, with terminal fittings | 1937 to 1950 | 4359-29 | Rubber jar only | 1937 to 1950 | 4369-29 | Wood separator | 1937 to 1950 | 437-26 | 4379 | Motor fastening bolt (4) | 1930 to 1950 | 4371-29 | Rubber separator | 1937 to 1950 | 4381-29 | Filler plug | 1930 to 1950 | 4383-28 | Filler plug washer | 1929 to 1950 | 4404-29 | Battery case only | 1929 to 1950--Solo | 4405-40 | Battery case only (black) | 1940 to 1950--Servi-Cars | 4407-29 | Battery case cover | 1929 to 1950 | 4409-24 | Cover bolt wing nut | 1929 to 1950 | 4409-26 | Clip bolt wing nut | 1933 to 1950 | 4411-24 | Cover clamp bolt | 1929 to 1940,1941 to 1950--Servi-Cars. | 4411-41 | Cover clamp bolt | 1941 to 1950--Solo | 4413-24 | Clamp bolt lock pin | 1929 to 1950 | 4417-29 | Rear frame plate | 1929 to 1950--Solo | 442-10 | 24811-10 | Crankshaft 1/4" x 1-5/8" (2) | 1937 to 1950 | 442-37 | 24812-37 | Crankcase stud 9/32" x 4-1/2" | 1937 to 1950 | 4427-15 | Rubber mat (2) | 1937 to 1950 | 443-37 | 4080 | Crankcase bolt 5/16" x 2-3/4" (2) | 1937 to 1950 | 4433-23 | Terminal screw | 1923 to 1950 | 4433-23A | Terminal screw felt washer | 1923 to 1950 | 4434-23 | 7628 | Terminal screw nut | 1923 to 1950 | 4435-23 | Set of battery terminal screws and fittings | 1923 to 1950 |
Part 4435-23 (Set of battery terminal screws and fittings) consists of: | |||
4433-23: Terminal screw | |||
4433-23A: Terminal screw felt washer | |||
4434-23: Terminal screw nut | 444-37 | 24813-37 | Crankcase stud 1/4" x 5" (2) | 1937 to 1950 | 4501-39 | Instrument panel base cpt. less speedometer | 1939 to 1946 | 4501-48C | Instrument panel base cpt., less speedometer | 1948 to 1950 | 4505-39 | Panel base only | 1939 to 1946 | 4505-39A | 2658 | Panel cover self tapping screw | 1939 to 1946 | 4505-47 | Panel base only | 1947 to 1950 | 4506-36 | Mounting base stud (3) | 1937 to 1946 | 4506-47 | Mounting base stud | 1947 to 1950 | 4506-47A | Mounting base center screw | 1947 to 1950--(Not used with choke control) | 4506-47B | Mounting base stud lock washer | 1947 to 1950 | 4506-47C | Mounting base screw | 1947 to 1950--(Used with choke control) | 4508-36 | Center bulb contact spring | 1937 to 1946 | 4508-38 | Side bulb contact spring (2) | 1938 to 1946 | 4509-38 | Side bulb socket (2) | 1938 to 1946 | 4509-38A | Bulb socket insulator (2) | 1938 to 1946 | 4509-38B | Screw insulator (9) | 1938 to 1950 | 4509-47 | Speedometer light socket | 1947 | 4509-47A | Signal light socket | 1947 to 1950 | 4509-47B | Signal light socket washer (2) | 1947 to 1950 | 4509-47C | Oil signal light socket | 1947 | 4509-48 | Speedometer light socket | 1948 to 1950 | 451-37 | 7698 | Crankcase stud nut (10) | 1937 to 1950 | 4510-36 | Center contact spring insulator (2) | 1937 to 1946 | 4510-47 | Panel light socket fibre washer (2) | 1947 to 1950 | 4510-47A | Panel light socket spring (2) | 1947 to 1950 | 4510-47B | Panel light socket wire (Green) | 1947 to 1950 | 4512-47 | Instrument panel cover gasket | 1947 to 1950 | 4513-47 | Panel lamp bulb (3) | 1947 to 1950 | 4516-39 | Instrument panel cover | 1939 to 1946 | 4516-47 | Instrument panel cover | 1947 to 1950 | 4517-47 | Panel signal light separator and gasket | 1947 to 1950 | 4517-47A | Panel signal light separator gasket | 1947 to 1950 | 4518-36 | 3550 | Panel cover hex, screw | 1937 to 1946 | 4518-38 | Instrument panel cover plug | 1938 to 1950 | 4519-39 | Cover side plate (for plain speedometer) | 1939 to 1946 | 4519-39A | Cover side plate (for Trip-mileage) | 1939 to 1946 | 4519-47 | Cover side plate | 1947 to 1950 | 4523-39 | Panel light shield, R.H. | 1939 to 1946 | 4523-39A | Panel light shield, L.H. | 1939 to 1946 | 4524-39 | Panel window and frame cpt. green | 1939 to 1946 | 4525-39 | Panel window and frame cpt. red | 1939 to 1946 | 4526-39 | Set of instrument panel windows | 1939 to 1946 | 4526-47 | Instrument panel window (Gen - Oil) | 1947 to 1950 | 4527-36 | Ignition and light switch cpt. with lock and keys | 1937 to 1950 | 4529-36A | Switch cover | 1937 to 1950 | 453-11 | 700 | Crankcase drain plug | 1938 to 1950 | 4531-36 | Switch key hole cover with rivet | 1937 to 1950 | 4534-36 | Cover rivet | 1937 to 1950 | 4534-47 | Tail lamp wire butt connector | Servi-Cars | 4536-36 | Switch base | 1937 to 1950 | 4539-36 | Switch mounting plate assembly | 1937 to 1950 | 4541-36 | Roller contact | 1937 to 1950 | 4543-36 | Roller contact retainer | 1937 to 1950 | 4545-36 | Contact holder & plate assembly ( = 71550-36) | 4550-39 | Panel light switch cpt. | 1939 to 1946 |
Part 4550-39 (Panel light switch cpt.) consists of: | |||
0204: 3/16" x 3/8" x 1/32" plain steel washer | |||
4551-37: Panel switch bracket | |||
4552-39: Panel switch stem | |||
4553-37: Panel switch cam (bakelite) | |||
4554-37: Panel switch stem spacer | |||
4555-37: Panel switch spring washer | 4551-37 | Panel switch bracket | 1939 to 1946 | 4551-37A | Bracket mounting rivet | 1937 to 1946 | 4552-39 | Panel switch stem | 1939 to 1946 | 4553-37 | Panel switch cam (bakelite) | 1939 to 1946 | 4554-36 | Switch lock plate | 1937 to 1950 | 4554-37 | Panel switch stem spacer | 1939 to 1946 | 4555-37 | Panel switch spring washer | 1939 to 1946 | 4556-42 | Panel switch knob and screw kit | 1938 to 1946 | 4557-37 | Switch contact spring | 1937 to 1946 | 4558-37 | Fibre insulator washer | 1937 to 1946 | 4558-43 | Panel light switch knob screw | 1938 to 1946 | 4559-37 | 6042 | Rivet washer,steel | 1937 to 1946 | 4560-39 | Ignition switch mounting spacer | 1939 to 1946 | 4590-48A | Terminal box | 1948 to 1950 | 4591-48 | Terminal box cover | 1948 to 1950 | 4592-48 | Terminal box and spark coil stud | 1948 to 1950 | 4593-48 | Terminal box insulator | 1948 to 1950 | 46-29 | 16775-29 | Cylinder base gasket | 1929 to 1950 | 462-11 | 25811-11 | Idler gear stud fibre washer | 1932 to 1950 | 4701-38 | Switch to coil,tail light terminal positive battery terminal wire | 1938 to 1946 | 4701-47 | Panel to battery, tail light terminals and spark coil wire | 1947 | 4701-48 | Mounting plate to spark coil terminal box wire | 1948 to 1950 | 4702-38 | Headlight to handlebar toggle switch 3-wire cable | 1938 to 1946 | 4703-36 | Switch to horn & toggle switch terminal wire | 1938 to 1946 | 4703-36A | Toggle switch and switch panel conduit | 1937 to 1946 | 4703-38A | 9973 | Front fork wire clamp | 1940 to 1950 | 4703-47 | Panel to horn cable | 1947 | 4704-39B | Stop and tail light wire | 1938 to 1946 | 4705-48 | Spark coil to terminal box wire | 1948 to 1950 | 4706-36 | Battery ground wire | 1938 to 1946 | 4706-37 | Positive battery to frame terminal wire | 1938 to 1946 | 4706-39 | Battery positive wire | 1938 to 1946 | 4706-41 | Battery negative ground wire | 1948 to 1950 | 4706-48 | Battery positive wire | 1948 to 1950 | 4708-38A | Switch to signal light wire | 1938 to 1946 | 4709-38 | Oil pressure switch wire | 1938 to 1946 | 4710-36 | Horn switch wire | 1938 to 1946 | 4711-45 | 1/4 I.D. Wire conduit (in bulk) | 1936 to 1950 | 4711-45A | 5/16" I.D. wire conduit (in bulk) | 1936 to 1950 | 4711-45B | 3/8 I.D. wire conduit (in bulk) | 1936 to 1950 | 4712-15 | 91704-15 | LV lighting cable, 16-strand, black (per foot) | All models | 4712-36 | Panel bulb contact wire | 1938 to 1946 | 4713-47 | Parking lamp lead wire | 1947 to 1950 | 4715-18 | Terminal eyelet | 1936 to 1946 | 4728-25 | 9979 | Wire clamp 1-1/4" | 1929 to 1950 | 4730-30A | 9977 | Wire retaining clamp (around frame head) | 1936 to 1950 | 4732-47C | Tail lamp cable-red | 1948 to 1950 | 4732-47D | Tail lamp cable black | 1948 to 1950 | 4733-39 | Stop light switch wire | WL, Servi-car, UL, Knucklehead, WLC 1939-1947. WLA 1940. | 4733-48 | 0il and stop light switch wire | 1948 to 1950 | 4735-38A | Complete set of low tension wiring | 1938 to 1946 | 4760-26 | Horn switch cpt. less wire | 1926 to 1950 |
Part 4760-26 (Horn switch cpt. less wire) consists of: | |||
018: 8-32 N.C. x 1/4" round head screw | |||
4762-26: Horn switch button | |||
4764-26: Shut-Off rod spring | |||
4766-26: Horn switch wire insulation | |||
4768-26: Horn switch housing | |||
4776-26: Horn switch contact plate | |||
4777-26: Horn switch spring stop washer | 4760-29 | Light switch cpt. less wire | 1929 to 1950 |
Part 4760-29 (Light switch cpt. less wire) consists of: | |||
018: 8-32 N.C. x 1/4" round head screw | |||
4764-29: Light switch lever | |||
4766-29: Light switch wire insulator | |||
4768-29: Light switch housing | |||
4770-29: Light switch contact pin | |||
4771-29: Light switch contact pin spring | |||
4776-29: Light switch contact block | |||
4777-29: Light switch retainer plate | 4762-26 | Horn switch button | 1926 to 1950 | 4764-26 | Shut-Off rod spring | 1940 to 1950 | 4764-29 | Light switch lever | 1929 to 1950 | 4766-26 | Horn switch wire insulation | 1926 to 1950 | 4766-29 | Light switch wire insulator | 1929 to 1950 | 4768-29 | Light switch housing | 1929 to 1950 | 4770-29 | Light switch contact pin | 1929 to 1950 | 4771-29 | Light switch contact pin spring | 1929 to 1950 | 4776-26 | Horn switch contact plate | 1926 to 1950 | 4776-29 | Light switch contact block | 1929 to 1950 | 4777-26 | Horn switch spring stop washer | 1926 to 1950 | 4777-29 | Light switch retainer plate | 1929 to 1950 | 4785-38 | Relay assembly | 1938 to 1950 | 4786-38 | Relay cover | 1938 to 1950 | 4787-26 | 2762W | Relay mounting and bracket screw | 1926 to 1950 | 4801-36 | Horn | 1937 to 1941 | 4801-42 | Horn | 1942 to 1950 | 4809-31 | Horn, front | 1931 to 1950 | 4810-31 | Diaphragm screw | 1931 to 1950 | 4811-31 | Diaphragm screw nut | 1931 to 1950 | 4813-31 | Adjusting screw | 1931 to 1950 | 4814-31 | Diaphragm assembly | 1931 to 1950 | 482-38 | 26568-38 | Oil pressure switch nipple | 1938 to 1950 | 4824-31 | Terminal screw | 1931 to 1950 | 4827-31 | Terminal screw bushing | 1931 to 1950 | 4829-31 | Terminal square fibre | 1931 to 1950 | 4829-42 | Horn terminal plate | 1942 to 1946 | 484-38 | 26579-38 | Pressure switch screen | 1938 to 1950 | 4855-42 | Horn bracket spring plate | 1942 to 1950 | 4856-42 | Horn bracket bolt | 1942 to 1950 | 4857-36 | Lower horn bracket | 1937 to 1945 | 4857-36A | Lower horn bracket reinforcement | 1937 to 1950 | 4857-45 | Lower horn bracket | 1946 to 1950 | 4858-36 | Upper horn bracket | 1940 to 1946 | 4858-36A | Upper bracket flexible connection | 1940 & 1941 | 4861-29 | Horn bracket spring | 1930 to 1941 | 4862-29 | Straight spring plate | 1930 to 1941 | 4862-31 | Curved spring plate | 1931 to 1941 | 4901-35 | Head lamp | 1935 to 1950 | 4901-35C | Head lamp, chrome plated | 1935 to 1950 | 4904-35 | Head lamp body | 1935 to 1950 | 4905-29 | Body fastening bolt | 1929 to 1950 | 4906-35 | Front lens | 1935 to 1950 | 4906-35A | Headlamp door & lens cpt. | 1935 to 1950 | 4910-35 | Lens retainer spring | 1935 to 1950 | 4912-35 | Lens packing washer | 1935 to 1950 | 4914-35 | Door only | 1935 to 1950 | 4915-35 | Door lug | 1935 to 1950 | 4918-35 | Door fastening screw | 1935 to 1950 | 4922-35 | Reflector | 1935 to 1950 | 4925-20 | 32-CP SC bulb | 1938 to first 1949 | 4925-35 | Headlamp bulb | 1935 to 1950 | 4927-15 | Panel lamp bulb (3) | 1937 to 1946 | 4935-35 | Inside lamp wiring | 1935 to 1950 | 4938-35 | Terminal block | 1935 to 1950 | 4940-35 | Terminal screw, 8-32 | 1935 to 1950 | 4941-35 | Terminal screw, 10-32 | 1935 to 1950 | 4955-47 | 6210 | Horn bracket insulator | 1947 to 1950 | 4966-36 | Upper horn bracket | 1947 to 1950 | 503-37 | 26331-37 | Breather valve gear and scavenger pump drive shaft | 1937 to 1950 | 504-37 | 25350-37 | Crankcase gear cover breather valve | 1937 to 1950 | 504-39 | 26343-39 | Scavenger pump screen | 1939 to 1950 | 5051-47 | Stoplight and tail lamp cpt. (black) | 1940 to 1950 | 5051-47A | Stoplight and tail lamp cpt. (chrome) | 1940 to 1950 | 5052-47 | Tail lamp housing (black) | 1947 to 1950 | 5052-47C | Tail lamp housing (chrome) | 1947 to 1950 | 5053-47 | Tail lamp grommet | 1947 to 1950 | 5054-47 | Tail lamp door (black) | 1947 to 1950 | 5054-47C | Tail lamp door (chrome) | 1947 to 1950 | 5055-47A | Tail lamp license plate screw | 1947 and 1948 | 5055-47C | Tail lamp license plate screw nut | 1947 and 1948 | 5056-39 | Tail lamp base gasket | 1939 to 1946 | 5056-47 | Tail lamp gasket | 1947 to 1950 | 5058-34 | Stop light bulb (21 - 3 c.p.) | 1934 to 1946 | 5058-47 | Tail lamp bulb | 1947 to 1950 | 5059-39 | Tail lamp red lens | 1939 to 1946 | 5059-47 | Tail lamp red lens | 1947 to 1950 | 5061-39 | Tail lamp red lens gasket | 1939 to 1941 | 5061-42 | Tail lamp red lens gasket | 1942 to 1946 | 5061-47 | Tail lamp gasket | 1947 to 1950 | 5063-39 | Tail lamp numberplate window | 1939 to 1946 | 5063-47 | Tail lamp out look lens or window | 1947 to 1950 | 5065-39 | Window gasket | 1939 to 1941 | 5065-42 | Window gasket | 1942 to 1946 | 5065-47 | Tail lamp out look window gasket | 1947 to 1950 | 5067-39 | Tail lamp lens retaining spring, left hand | 1939 to 1941 | 5067-39A | Tail lamp lens retaining spring, right hand | 1939 to 1941 | 5067-42 | Red lens lower speed nut | 1942 to 1946 | 5067-42A | Red lens upper speed nut | 1942 to 1946 | 5067-42B | License window speed nut | 1942 to 1946 | 5067-47 | Tail lamp spring | 1947 to 1950 | 5069-39 | Tail lamp housing screw | 1939 to 1946 | 5070-47 | Tail lamp upper stud | 1947 to 1950 | 5070-47A | Tail lamp lower stud | 1947 to 1950 | 5072-47 | Tail lamp license plate | 1947 to 1948 | 5072-49 | Tail lamp license plate | 1949 and 1950 | 5075-39 | Rear lamp base | 1939 to 1946 | 5076-39 | Socket spring and fittings | 1939 to 1946 | 5077-47 | Tail light socket complete | 1947 to 1950 | 5079-48 | Tail lamp wire protection coil | 1948 to 1950 | 5081-39 | Stop light switch only | 1939 to 1950 | 5082-39 | Switch mounting bracket | 1939 to 1950 | 5083-39 | Stoplight switch insulator | 1939 to 1950 | 5084-39 | Switch operating spring | 1939 to 1950 | 5088-39A | Stop light pull wire | 1939 to 1950 | 5092-39 | License bracket with fittings | 1939 to 1946 | 52-36 | 17025-36 | Complete set of motor gaskets | 1936 to 1950--with iron heads |
Part 52-36 (Complete set of motor gaskets) consists of: | |||
11-36: Cylinder head gasket | |||
1121-21: Inlet pipe gasket | |||
1121-29: Inlet pipe gasket | |||
1269-28: Bowl lock nut gasket | |||
1527-30: Generator gasket | |||
1541-37: Timer base gasket | |||
167-38: Valve guide oil seal | |||
175-29: Valve cover packing | |||
176-26: Valve cover and guide gasket | |||
237-30: Tappet guide gasket | |||
40-08: Spark plug gasket | |||
46-29: Cylinder base gasket | |||
544-37: Relief pipe gasket | |||
589-37: 011 feed pump gasket | |||
590-37: Oil scavenger pump base and cover gasket | |||
598-37A: Gear cover gasket | 524-25 | Rear chain guard stud spring | 1939 to 1950 | 53-40 | 17026-40 | Complete set of motor gaskets | 1940 to 1950--with aluminum heads |
Part 53-40 (Complete set of motor gaskets) consists of: | |||
11-39: Cylinder head gasket | |||
1121-39: Inlet pipe gasket | |||
1269-28: Bowl lock nut gasket | |||
1527-30: Generator gasket | |||
1541-37: Timer base gasket | |||
167-38: Valve guide oil seal | |||
175-29: Valve cover packing | |||
176-26: Valve cover and guide gasket | |||
237-30: Tappet guide gasket | |||
40-08: Spark plug gasket | |||
46-29: Cylinder base gasket | |||
544-37: Relief pipe gasket | |||
589-37: 011 feed pump gasket | |||
590-37: Oil scavenger pump base and cover gasket | |||
598-37A: Gear cover gasket | 543-37 | 24912-37 | Crankcase relief pipe | 1937 to 1950--except 1942--WLA | 543-37A | 24910-37 | Chain oiler pipe | 1937 to 1950 | 543-37B | 24913-37 | Crankcase relief pipe | 1942--WLA Models | 544-37 | 24921-37 | Relief pipe gasket | 1936 to 1950--with iron heads, 1940 to 1950--with aluminum heads | 546-45 | 24918-45 | Breather pipe fitting | 1942-WLA Model | 55-36A | 17030-36 | Engine top overhaul gasket set | 1936 to 1950--with iron heads |
Part 55-36A (Engine top overhaul gasket set) consists of: | |||
11-36: Cylinder head gasket | |||
1121-21: Inlet pipe gasket | |||
1121-29: Inlet pipe gasket | |||
1121-39: Inlet pipe gasket | |||
167-38: Valve guide oil seal | |||
175-29: Valve cover packing | |||
176-26: Valve cover and guide gasket | |||
46-29: Cylinder base gasket | 55-40 | 17031-40 | Engine top overhaul gasket set | 1940 to 1950--with aluminum heads |
Part 55-40 (Engine top overhaul gasket set) consists of: | |||
11-39: Cylinder head gasket | |||
1121-39: Inlet pipe gasket | |||
15-39: Head bolt washer (16) | |||
167-38: Valve guide oil seal | |||
175-29: Valve cover packing | |||
176-26: Valve cover and guide gasket | |||
46-29: Cylinder base gasket | 56006-49 | Long buckhorn handlebar complete (black) | 49 to 57--WL models & GA | 56007-49 | Short speedster handlebar complete (black) | 49 to 52--WL models | 56012-49 | Long buckhorn handlebar complete (chrome) | 1949 to 1953--rubber mounted, WL & OHV | 56013-49 | Short speedster handlebar complete (chrome) | 1949 to 1953--rubber mounted, WL & OHV | 56049-49 | Short speedster handlebar (bare) (chrome) | 49 to 53--rubber mounted, WL & OHV | 56054-49 | Long buckhorn handlebar (bare) (chrome) | 49 to 53--rubber mounted, WL & OHV | 56056-49 | Long buckhorn handlebar (bare) (black) | 49 to 57--WL & GA. solid mounting | 56057-49 | Short speedster handlebar (bare) (black) | 49 to 52--WL models, solid mounting | 56119-49 | Handlebar triple clamp | 37 to early 46-61", 74" & 80" twins, 49 to 52--WL models, rubber mounted bars | 56127-49 | Handlebar riser bracket (2) | Later 49 to 53--WL & OHV (all rubber mounted bar) | 56142-49 | Set of rubber mounts complete | 40 to 57--WL & GA | 56148-49 | Handlebar riser with rubber bushing (2) | 49 to 57--WL & OHV models | 56154-49 | Handlebar riser mounting screw (2) | 49 to 57--WL & OHV, rubber mounted | 56155-49 | Handlebar riser cap (black) (2) | 49 to 57--WL (5, OHV, rubber mounted | 56156-49 | Handlebar riser cap (chrome) (2) | 49 to 57--WL & OHV, rubber mounted | 56158-49 | Handlebar riser rubber bushing (2) | 49 to 57--WL & OHV, rubber mounted | 56159-49 | Handlebar riser screw rubber washer (4) | 49 to 57--WL & OHV, rubber mounted | 56166-49 | Handlebar riser link | 49 to 52--WL & OHV (spring fork with rubber mounting) | 56167-49 | Handlebar riser link mounting stud (4) | 1949 to 1957--WL & OHV, rubber mounted | 56210-47 | Handlebar grips (black) (2) | Replaced by 56212-53 | 56220-48 | Handlebar grip sleeve (2) | 1949 to 1953--all models | 56235-47 | Handlebar grip retainer | 1949 to 1953--all models, 1954--Servi-Cars | 56240-47 | Grip retainer screw | 1949 to 1953--All models, 1954-1957--Servi-Cars | 56391-49 | Control wire & plunger | 1949 to 1953--all models, rubber mounted, 1954--Servi-Cars | 56392-49 | Control wire | 1949 to 1953--all models, rubber mounted, 1954--Servi-Cars | 56410-47 | Control coil plug | All 1949-1953, Rigid 1954-1957. Servi-car 1954-1957 | 56528-49 | Control coil and plug | 1949 to 1953--all models, rubber mounted, 1954--Servi-Cars | 56529-49 | Control coil only (2) | 1949 & 1950--rubber mounted | 56616-49 | 9959 | Carburetor control coil clip (2) | 1949 & 1950 | 58000-48 | Windshield complete | 1940 to 1954--all models with spring fork | 58001-49 | Window complete | 1949 and 1950-(Models having spring fork and rubber mounted handlebars) | 58020-48 | Windshield upper window | 1940 to 1950 | 58022-48 | Windshield lower window | 1940 to 1950 | 58032-48 | Windshield inner brace | 1940 to 1950 | 58037-48 | Windshield outer brace | 1940 to 1950 | 58045-49 | Windshield handlebar clamp | 1949 and 1950--(Spring fork with rubber mounting) | 58047-48 | Windshield handlebar clamp | 1940 to 1950 | 58048-48 | Windshield mounting clamp | 1940 to 1950 | 58050-48 | Handlebar clamp stud | Servi-car 1940-1957. | 58052-48 | Handlebar stud spacer | Servi-car 1940-1957. | 58064-49 | Windshield brace screwrubber washer | Springer windshield. Servi-car 1940-1957. | 58072-48 | Windshield support, right | Model(s): 1940 to 1949--all models, 1950 to 1952--45" twins, 1953 & 1954 Servi-Cars (models with spring fork) | 58073-48 | Windshield support, left | 1940 to 1949--all models, 1950 to 1952--45" twins, 1953 & 1954 Servi-Cars (models with spring fork) | 58075-48 | Windshield support bracket | Springer windshield. Servi-car 1940-1957. | 58124-48 | Windshield apron | 1940 to 1949--all models, 1950 to 1952--45" twins, 1953 & 1954 Servi-Cars (models with spring fork) | 585-37 | 25281-37 | Breather oil separator seal ring | 1937 to 1950 | 585-37B | 25285-37 | Seal ring retaining pin (2) | 1937 to 1950 | 587-37 | 26203-37 | Oil feed pump assembly | 1937 to 1950 | 588-37 | 26204-37 | Oil scavenger pump assembly | 1937 to 1950--solo only | 588-38 | 26205-38 | Oil scavenger pump assembly | 1938 to 1950--Servi-Cars | 589-37 | 26244-37 | 011 feed pump gasket | 1936 to 1950--with iron heads, 1940 to 1950--with aluminum heads | 590-37 | 26246-37 | Oil scavenger pump base and cover gasket | 1936 to 1950--with iron heads, 1940 to 1950--with aluminum heads | 59007-50 | Front fender less flap (prime color) | 1940 to 1952--45" solo only | 59012-50 | Front fender less flap | Replaced by 59012-50A | 591-36 | 24819-36 | Oil pump mounting stud 1/4" x 1-11/16" | 1937 to 1950 | 591-37 | 24819-37 | Oil pump mounting stud 1/4" x 1-7/16" | 1937 to 1950 | 591-41 | 24830-41 | Oil pump mounting stud nut, short | 1941 to 1950 | 591-41A | 24831-41 | 011 pump mounting stud nut, long | 1941 to 1950 | 59105-50 | Front fender front brace | 50 to 52--WL models | 59107-50 | Front fender rear brace | 50 to 52--WL models | 5919-08 | 011 tank transfer | 1936 to 1950 | 59204-49 | Set of front fender trim with fittings | 49 to 56--OHV, 50 to 56--WL & G |
Part 59204-49 (Set of front fender trim with fittings) consists of: | |||
59205-49: Front fender side trim | |||
59207-49: Front fender lower end trim | |||
59215-49: Front fender tip | |||
59895-49: Fender trim clip - 9/16" | |||
59896-49: .03 Front fender trim clip (5/8") | 59205-49 | Front fender side trim | 49 to 56--OHV, 50 to 56--WL & G | 59207-49 | Front fender lower end trim | 49 to 56--OHV, 50 to 56--WL & G | 59215-49 | Front fender tip | 49 to 56--OHV, 50 to 56--WL & G | 59235-48 | Front fender flap | 49 to 57--OHV, 50 to 57--WL & G | 59612-41 | Rear fender & brace (prime color) | 50 to 52--WL | 59699-49 | Rear fender rear end | 49 to 54--OHV, 50 to 52--WL models | 598-37A | 25226-37 | Gear cover gasket | 1936 to 1950--with iron heads, 1940 to 1950--with aluminum heads | 59874-49 | Set of rear fender trim with fittings | 1950 |
Part 59874-49 (Set of rear fender trim with fittings) consists of: | |||
59225-39: Fender trim clips | |||
59875-49: Rear fender right top trim | |||
59876-49: Rear fender right middle trim | |||
59877-49: Rear fender right bottom trim | |||
59878-49: Rear fender right left top trim | |||
59879-49: Rear fender right middle trim | |||
59880-49: Rear fender right bottom trim | 59875-49 | Rear fender right top trim | 1949 to 1950--OHV twins, 1950--45" twins | 59876-49 | Rear fender right middle trim | 1949 to 1950--OHV twins, 1950--45" twins | 59877-49 | Rear fender right bottom trim | 1949 to 1950--OHV twins, 1950--45" twins | 59878-49 | Rear fender right left top trim | 1949 to 1950--OHV twins, 1950--45" twins | 59879-49 | Rear fender right middle trim | 1949 to 1950--OHV twins, 1950--45" twins | 59880-49 | Rear fender right bottom trim | 1949 to 1950--OHV twins, 1950--45" twins | 59895-49 | Fender trim clip - 9/16" | 1949 to 1954--OHV twins, 1950 to 1952--45" twins, 1953 & 1954 Servi-Cars | 59896-49 | .03 Front fender trim clip (5/8") | 49 to 56--OHV, 50 to 56--WL & G | 6033-30 | 4636 | Handlebar bolt (2) | 1940 to 1948 | 6036-36 | 4979 | Footrest bolt | 1940 to 1950 | 6036-36B | 7938 | Footrest bolt nut | 1940 to 1950 | 604-37A | 24011-37 | Pinion gear | 1937 to 1950 | 610-37 | 25501-37 | Front inlet cam gear | 1937 to 1950 | 611-37 | 25502-37 | Rear inlet cam gear and timer gear | 1937 to 1950 | 6114-36 | Rear frame plate bolt | 1929 to 1950--Solo | 612-37 | 25503-37 | Front exhaust cam gear | 1937 to 1950 | 613-37 | 25504-37 | Rear exhaust cam gear | 1937 to 1950 | 6166-28 | 83105-28 | Timken bearing cup outer race | 1932 to 1950--Servi-Cars | 619-37 | 25776-37 | Idling gear | 1937 to 1950 | 620-30 | 25785-30 | Idling gear bushing | 1932 to 1950 | 621-37 | 25851-37 | Timer drive gear only | 1937 to 1950 | 62250-50 | Gas strainer complete | 50 to 57--all models |
Part 62250-50 (Gas strainer complete) consists of: | |||
62253-50: Gas strainer base | |||
62265-32: Gas strainer screen | |||
62268-32: Gas strainer cap | |||
62270-32: Gas strainer washer | 62253-50 | Gas strainer base | 1950 to 1957 -- all models | 62354-50 | Gas line | 50 to 57--WL & G | 62360-50 | 62370-50 | Gas line rubber sleeve (2) | 50 to 57--all models | 62361-50 | 62371-50 | Strainer & gas line nut | 1950 to 1957--all models | 632-37 | Generator drive gear | 1937 to 1950 | 634-32 | 327 | Generator gear pin | 1932 to 1950 | 636-30A | 25788-30 | Idler gear stud assembly | 1932 to 1950 |
Part 636-30A (Idler gear stud assembly) consists of: | |||
462-11: Idler gear stud fibre washer | |||
644-30: Idler gear stud screw | |||
658-15: Idler gear stud spring ring | 644-30 | 25794-30 | Idler gear stud screw | 1932 to 1950 | 6499-30 | 88624-30 | Cover latch plate | 1935 to 1950--Servi-Cars | 658-15 | 25810-15 | Idler gear stud spring ring | 1932 to 1950 | 659-37A | 25575-37 | Set of gear shaft end bushings | 1937 to 1950 |
Part 659-37A (Set of gear shaft end bushings) consists of: | |||
660-37: Cam gear cover bushing | |||
660-37A: Cam gear cover bushing | |||
660-37B: Cam gear cover bushing | |||
660-37C: Cam gear cover bushing | |||
660-37E: Cam cover gear shaft bushing | |||
661-31: Cover bushing pin | |||
661-37A: Crankcase cam gear bushing | |||
664-37: Camshaft steel washer | 6593-31 | 5434 | Apron fastening bolt & nut | 1932 to 1941--Servi-cars | 660-37 | 25595-37 | Cam gear cover bushing | 1937 to 1950 | 660-37A | 25590-37 | Cam gear cover bushing | 1937 to 1950 | 660-37B | 25588-37 | Cam gear cover bushing | 1937 to 1950 | 660-37C | 25586-37 | Cam gear cover bushing | 1937 to 1950 | 660-37E | 25593-37 | Cam cover gear shaft bushing | 1937 to 1950 | 661-31 | 271 | Cover bushing pin | 1937 to 1950 | 661-37A | 25601-37 | Crankcase cam gear bushing | 1937 to 1950 | 664-37 | 6769 | Camshaft steel washer | 1937 to 1950 | 6650-18 | 88936-18 | Spider friction washer | 1937 to 1950 | 6657-36 | 88540-36 | Lap apron eyelets with washer | 1937 to 1950 | 6658-25 | Lift the dot fasteners | 1930 to 1940 | 672-32 | 26383-32 | Chain oiler adjusting screw | 1933 to 1950 | 674-32 | 6170 | Chain oiler adjusting washer .002" | 1933 to 1950 | 678-37 | Oil pump body | 1937 to 1940 | 678-41 | 26216-41 | Oil pump body | 1941 to 1950 | 679-37 | 26218-37 | Oil scavenger pump body | 1937 to 1950 | 682-37 | 26231-37 | Oil scavenger pump cover | 1937 to 1950--solo only | 682-38 | 26232-38 | Oil scavenger pump cover | 1938 to 1950--Servi-Cars | 68450-49 | Front fender lamp with wiring | 50 to 57--WL & G | 68455-49 | Glass lens | 50 to 57--WL & G | 68457-49 | Front fender lamp cover (4 5/8" long) | 50 to 57--WL & G | 68458-49 | Fender lamp mounting pad | 50 to 57--WL & G | 68459-49 | Fender lamp gasket (rubber) | 50 to 57--WL & G | 68461-49 | Fender lamp wire | 1950 | 68462-49 | Fender lamp bulb | 50 to 57--WL & G | 68463-49 | Fender lamp cover screw (2) | 50 to 57--WL & G | 68464-49 | Front fender lamp wire rubber grommet | 50 to 57--WL & G | 68465-49 | Front fender lamp wire spring | 1950 to 1957--WL & G | 68466-49 | Front fender lamp wire spring washer | 50 to 57--WL & G | 687-37 | 26267-37 | Oil feed pump vane holder | 1937 to 1940 | 687-41 | 26270-41 | Oil feed pump vane holder | 1941 to 1950 | 688-37 | 26284-37 | Oil feed pump vane | 1937 to 1950 | 689-37 | 26286-37 | Oil feed pump vane spring | 1937 to 1950 | 689-37B | 26318-37 | Breather valve and scavenger pump gear | 1937 to 1950 | 690-37 | 26320-37 | Oil scavenger pump gear | 1937 to 1950--solo only | 690-38 | 26321-38 | Oil scavenger pump gear | 1938 to 1950--Servi-Cars | 691-37 | 26326-37 | Oil scavenger pump idler gear | 1937 to 1950 | 693-36 | 26340-36 | Oil pump and scavenger pump gear key | 1937 to 1950 | 694-37 | 26341-37 | Scavenger gear split retaining washer | 1937 to 1950 | 697-37 | 26329-37 | Scavenger pump idler gear shaft | 1937 to 1950 | 7003-41 | Tow bar and attachments | 1941 to 1946 | 7006-39 | Safety cable cpt | 1939 to 1950 | 7007-39A | Tow bar fork | 1941 to 1946 | 7007-47 | Tow bar fork | 1947 to early 1949 | 7008-39 | Rocker plate stud collar | 1939 to 1950 | 7008-39A | Tow bar end bushing | 1939 to 1950 | 7009-39 | 82195-39 | Tow bar clamp bracket | 1940 to 1946 | 7009-47 | 82195-47 | Support bracket cpt. | 1947 to 1950 | 7009-47A | 82197-47 | Support bracket upper half | 1947 to 1950 | 7009-47B | 82202-47 | Support bracket lower half | 1947 to 1950 | 701-36 | 26362-36 | Check valve spring cover screw | 1937 to 1950 | 70102-49 | Headlight wire | 48 to 57--WL & G | 7011-47 | 82221-47 | Support bracket fork stud | 1947 to 1950--(on plain fork) | 7011-47A | 82223-47 | Support bracket fork stud | 1947 to 1950--(with shock absorber) | 7012-47 | 82204-47 | Support bracket end bushing | 1947 to 1950 | 7013-47 | 82206-47 | Support bracket spring | 1947 to 1950 | 7013-47A | 82215-47 | Support bracket wing nut | 1947 to 1950 | 70130-49 | Wiring | 1947 to 1954 | 7014-38 | Tcw bar swivel block | 1938 to 1946 | 7014-47 | Tow bar swivel block | 1947 tot early 1949 | 7015-39 | Swivel block pin | 1939 to 1946 | 7016-47 | Tow bar swivel block washer | 1947 to early 1949 | 7017-47 | Tow bar swivel and spacer | 1947 to early 1949 | 7018-39A | Swivel clamp post | Later 1939 to early 1949 | 7019-38 | Swivel pin | 1938 to early 1949 | 7019-38A | Swivel block pin | 1938 to early 1948 | 7019-48 | Swivel block pin | 1948 and early 1949 | 7021-38A | Swivel pin plain washer | 1938 to early 1949 | 7021-40 | Swivel pin spring washer | Later 1940 to 1949 | 7025-39 | Tow bar clamp post swivel screw | Later 1939 to early 1949 | 703-36 | 26363-36 | Check valve spring | 1937 to 1950 | 7030-39 | Set tow bar clamp jaws handwheels (1941 style) | Fit 1939 to 1941 tow bars | 70320-48 | Complete set of low tension wiring | 48 to 57--WL & G |
Part 70320-48 (Complete set of low tension wiring) consists of: | |||
0103: 8-32 N.C. x 1/8" x 5/16" hexagon nut | |||
0201A: 13/64" x 3/8" x 1/32" brass washer | |||
1613-30A: Circuit breaker to coil wire and stud | |||
1615-49A: Circuit breaker wire stud insulator | |||
1618-30: Circuit breaker wire stud fibre washer | |||
1741-47: Switch to generator and relay wire | |||
1742-47: Ignition wire | |||
32678-49: Stud insulator | |||
32690-30: Circuit breaker to coil wire & stud washer | |||
4705-48: Spark coil to terminal box wire | |||
4706-41: Battery negative ground wire | |||
4706-48: Battery positive wire | |||
4732-47C: Tail lamp cable-red | |||
4732-47D: Tail lamp cable black | |||
4733-48: 0il and stop light switch wire | |||
6106: 5/32" x 1/2" Bakelite washer | |||
6156: 3/16" x 3/8" Brass washer | |||
70102-49: Headlight wire | |||
70131-51A: Horn switch wire | |||
70160-48: Mounting plate to coil terminal box wire | |||
70167-47: Ignition wire | |||
70182-48: Spark coil to terminal box wire | |||
70193-48: Battery positive wire | |||
70209-41: Battery negative ground wire | |||
70244-47: Switch to generator and relay wire | |||
70281-47: Tail lamp wire (72 1/8") (red) | |||
70331-48: Oil & stop light switch wire | |||
7608: Control bracket screw nut | 7036-39A | 82242-39 | Handwheel clamp bolt in x 51" | Later 1939 to 1946 | 7037-32 | 82376-32 | Clamp wing nut | 1938 to 1946 | 7037-39A | 82248-39 | Handwheel clamp bolt spring | Later 1939 to 1946 | 7037-39B | 82249-39 | Handwheel clamp bolt cover plate | Later 1939 to 1946 | 7038-39 | 82240-39 | Handwheel and bolt cpt. | Later 1939 to 1946 | 7038-39A | 82241-39 | Handwheel only | Later 1939 to 1946 | 7041-41 | 82246-41 | Handwheel bolt lock | 1941 t9 1946 | 7042-41 | 82247-41 | Handwheel bolt lock spring | 1941 to 1946 | 7045-38 | 82300-38 | Tow bar auxiliary clamp cpt. | 1938 to 1946 | 7046-38 | 82301-38 | Clamp base | 1938 to 1946 | 7047-38 | 82373-38 | Clamp flat plate | 1938 to 1946 | 707-36 | 26367-36 | By-pass valve cover screw | 1937 to 1950 | 7072-48 | 82301-48 | Tow bar auxiliary clamp | 1947 to early 1949 tow bars, for hole-in bumper cars | 7074-48 | 82305-48 | Plunger | 1947 to 1950 | 7075-48 | 82306-48 | Plunger lock ring | 1947 to 1950 | 7076-48 | 82308-48 | Plunger spring | 1947 to 1950 | 7077-48 | 82310-48 | Handle nut | 1947 to 1950 | 7077-48A | 82312-48 | Nut only | 1947 to 1950 | 7077-48B | 82314-48 | Nut handle | 1947 to 1950 | 7077-48C | 82316-48 | Nut washer | 1947 to 1950 | 7077-48D | 82318-48 | Spring | 1947 to 1950 | 7079-48 | 82324-48 | Connection block or jaw | 1947 to 1950 | 7080-48 | 82330-48 | Jaw | 1947 to 1950 | 7081-48 | 82332-48 | Jaw shaft | 1947 to 1950 | 7082-48 | 82334-48 | Jaw spring | 1947 to 1950 | 7083-48 | 82336-48 | Jaw spring shaft | 1947 to 1950 | 7084-48 | 82359-48 | Auxiliary clamp connection | 1947 and 1948 | 7086-48 | 82364-48 | Ball lock nut | 1947 to 1950 | 7101-39 | Axle housing and differential cpt. | 1939 to 1940--Servi-Cars | 7101-41 | 82800-41 | Axle housing and differential cpt. | 1941 to 1950--Servi-Cars | 7104-38 | 82816-38 | Differential gear housing, left half | 1938 to 1950--Servi-Cars | 7106-38 | 82821-38 | Differential gear housing cap, right half | 1938 to 1950--Servi-Cars | 7107-37 | 82830-37 | Differential bolt | 1937 to 1950--Servi-Cars | 7109-32 | 82835-32 | Differential axle gear, large | 1932 to 1950--Servi-Cars | 711-36 | 26368-36 | By-pass valve adjusting screw | 1937 to 1940 | 711-41 | 26369-41 | By-pass valve adjusting screw | 1941 to 1950 | 7111-32 | 82840-32 | Differential gear, small | 1932 to 1950--Servi-Cars | 7114-32 | 82845-32 | Differential gear shaft and lock plates | 1932 to 1950--Servi-Cars | 7115-34 | 82846-34 | Differential gear shaft lock plates | 1934 to 1950--Servi-Cars | 7116-32 | 82850-32 | Differential gear spacer | 1932 to 1950--Servi-Cars | 7120-32A | 82860-32 | Drive sprocket, 37 tooth | 1932 to 1950--Servi-Cars | 7125-32 | Right axle | 1932 to 1940--Servi-Cars | 7125-41 | 82870-41 | Right axle | 1941 to 1950--Servi-Cars | 7126-32 | Left axle | 1932 to 1940--Servi-Cars | 7126-41 | 82873-41 | Left axle | 1941 to 1950--Servi-Cars | 7129-32 | 82884-32 | Axle lock ring (half) | 1932 to 1950--Servi-Cars | 7129-32A | 82885-32 | Axle lock ring (half) (4), .130" thick | 1932 to 1950--Servi-Cars | 7129-32B | Axle lock ring (half) (4), .135" thick | 1932 to 1950--Servi-Cars | 713-37 | By-pass valve spring | 1937 to 1950 | 713-41 | 26373-41 | By-pass valve spring | 1941 to 1950 | 7135-39 | Left axle housing and tube | Later 1939 & 1940--Servi-Cars | 7135-41 | 82965-41 | Left axle housing and tube | 1941 to 1950--Servi-Cars | 7140-38 | Right axle housing and tube | 1938 to 1940--Servi-Cars | 7140-41 | 82960-41 | Right axle housing and tube | 1941 to 1950--Servi-Cars | 7145-34 | 83020-34 | Axle housing stud, 4-15/16" | 1940 to 1950--Servi-Cars | 7145-39 | 83022-39 | Axle housing stud (3), 3-29/32" | Later 1939 to 1950--Servi-Cars | 7145-39A | 83024-39 | Axle housing stud (2), 4-7/16" | Later 1939 to 1950--Servi-Cars | 7146-34 | Housing truss rod | Later 1934 to 1940 Servi-Cars | 7146-41 | 83050-41 | Housing truss rod | 1941 to 1950--Servi-Cars | 7147-34 | 83055-34 | Truss rod coupling | Later 1934 to 1950--Servi-Cars | 7148-32 | 83095-32 | Timken bearing housing (cage), (left side) | 1932 to 1950--Servi-Cars | 7149-34 | 83057-34 | Truss rod coupling stud | Later 1934 to 1950--Servi-Cars | 7149-38 | 83098-38 | Timken bearing and housing cpt. | 1938 to 1950--Servi-Cars | 715-37 | 26381-37 | By-pass ball retainer | 1937 to 1950 | 7150-32 | 83101-32 | Bearing housing lock screw | 1932 to 1950--Servi-Cars | 7151-34 | 83060-34 | Coupling lock nut | Later 1934 to 1950--Servi-Cars | 7157-32 | 83107-32 | Timken bearing inner race with rollers | 1932 to 1950--Servi-Cars | 7160-38 | 83110-38 | Dust retainer | 1938 to 1950--Servi-Cars | 7163-32 | 83135-32 | Left side wheel bearing and housing cpt. | 1932 to 1950--Servi-Cars | 7164-32 | Right side wheel bearing and housing cpt. | 1932 to 1950--Servi-Cars | 7165-32 | 83139-32 | Left end bearing cup, outer race | 1932 to 1950--Servi-Cars | 7166-32 | 83152-32 | Right end bearing cup, outer race | 1932 to 1950--Servi-Cars | 7169-32 | 83154-32 | Bearing cup lock washer (outer race) | 1932 to 1950--Servi-Cars | 7173-32 | 83160-32 | Roller thrust bushing | 1932 to 1950--Servi-Cars | 7176-32 | 83162-32 | End bearing felt washer | 1932 to.1950--Servi-Cars | 7178-32 | 83164-32 | End bearing thrust washer | 1932 to 1950--Servi-Cars | 7180-32 | 83166-32 | End bearing spring ring | 1932 to 1950--Servi-Cars | 7190-32 | 83001-32 | Frame clamp bolt | 1932 to 1950--Servi-Cars | 7193-32 | 83003-32 | Rubber bumper | 1932 to 1950--Servi-Cars | 7230-37 | 83632-37 | Brake operating lever, left side | 1937 to 1950--Servi-Cars | 7230-37A | 83630-37 | Brake operating lever, right side | 1937 to 1950--Servi-Cars | 7231-37 | 83625-37 | Brake crossover shaft | 1937 to 1950--Servi-Cars | 7231-37A | 83628-37 | Crossover shaft squared end | 1937 to 1950--Servi-Cars | 7231-37B | 83636-37 | Shaft end pin | 1937 to 1950--Servi-Cars | 7232-37 | 83640-37 | Brake cross shaft bracket (on gear housing) | 1937 to 1950--Servi-Cars | 7233-37 | 83642-37 | Cross shaft bracket, left side | 1937 to 1950--Servi-Cars | 7233-37A | 83643-37 | Cross shaft bracket, right side | 1937 to 1950--Servi-Cars | 7233-37B | 83644-37 | Bracket bolt lock washer | 1937 to 1950--Servi-Cars | 7234-37 | 83635-37 | Brake lever for crossover shaft | 1937 to 1950--Servi-Cars | 7235-37 | 83655-37 | Intermediate brake lever, on crossover shaft | 1937 to 1950--Servi-Cars | 7235-37A | 363 | Retaining rivet for intermediate brake lever | 1937 to 1950--Servi-Cars | 7236-37B | 83695-37 | Link rod clevis | 1937 to early 1940--Servi-Cars | 7236-40 | 83690-40 | Brake cross shaft link assembly | 1940 to 1950-Servi-Cars | 7236-40A | 83691-40 | Link threaded rod, left hand | 1940 to 1950--Servi-Cars | 7237-37 | Brake side plate | 1937 to 1946--Servi-Cars | 7238-39 | 83697-39 | Rear brake rod | 1939 to 1950--Servi-Cars | 7251-37 | 83900-37 | Rear wheel 18", less tire | 1937 to 1950--Servi-Cars | 7251-40 | 83901-40 | Rear wheel cpt. 16", less tire | 1940 to 1950--Servi-Cars | 7255-37 | 83950-37 | Rear wheel hub | 1937 to 1950--Servi-Cars | 7258-37 | 83960-37 | Rear wheel hub cap | 1937 to 1950--Servi-Cars | 7263-32 | 82903-32 | Rear wheel key | 1932 to 1950--Servi-Cars | 7266-37 | 82900-37 | Axle spacer | 1937 to 1950--Servi-Cars | 7266-37A | 83975-37 | Axle plain washer | 1937 to 1950--Servi-Cars | 7267-32 | 7947 | Axle nut, castellated | 1932 to 1950--Servi-Cars | 7303-32 | Box supporting frame | 1932 to 1941--G & GA, Servi-Cars | 7303-32A | 84506-32 | Box supporting frame | 1932 to 1941--GD & GDT, Servi-Cars, 1942 to 1950--Servi-Cars | 7305-32 | Right front spring | 1932 to 1950--Servi-Cars | 7306-32 | Left front spring | 1932 to 1950--Servi-Cars | 7306-32A | Front spring, long leaf (15-9/32") | 1932 to 1950--Servi-Cars (For 1 - 1/4" spring) | 7306-32C | 84567-32 | Spring end clip & bushing | 1932 to 1950--Servi-Cars | 7307-32 | 4686 | Front spring bolt | 1932 to 1950--Servi-Cars | 7307-34 | 84585-34 | Spring clamp U-bolt | 1934 to 1950--Servi-Cars (For 1 - 1/4" spring) | 7308-32 | 84588-32 | Spring and U-bolt clip | 1932 to 1950--Servi-Cars (For 1 - 1/4" spring) | 7309-32 | Spring end rivet washer | 1932 to 1950--Servi-Cars | 7309-32A | 84592-32 | Spring end rivet | 1932 to 1950--Servi-Cars | 7310-32 | Frame tie bar | 1932 to 1950--Servi-Cars | 7311-32 | Tie bar nut washer | 1932 to 1940--Servi-Cars | 7311-41 | Tie bar nut washer | 1941 to 1950--Servi-Cars | 7312-32 | 84593-32 | Spring end clip bushing | 1932 to 1950--Servi-Cars | 7314-32 | Motorcycle frame bushing, for tie bar | 1932 to 1940--Servi-Cars | 7314-41 | Motorcycle frame bushing,for tie bar | 1941 to 1950--Servi-Cars | 7316-32 | Tie bar spring | 1932 go 1950--Servi-Cars | 7317-32 | Tie bar clamp | 1932 to 1950--Servi-Cars | 7319-32 | Cushion spring | 1932 to 1941--G & GA Servi-cars | 7319-32A | 84640-42 | Cushion spring | 1932 to 1941--GD & GDT Servi-cars | 7319-42 | Cushion spring | 1942 to 1950--Servi-Cars | 7321-32 | 84643-32 | Spring bolt spacer washer | 1932 to 1950--Servi-Cars | 7330-39 | Box & cover (specify color number listed on chart - solid colors only | 1939 to 1941--G & GA Servi-Cars | 7330-42 | 84740-42 | Box & cover (specify color number listed on chart - solid colors only | 1942 to 1950--Servi-Cars | 7334-32A | 84744-32 | Box reinforcing plate,front | 1939 to 1950--Servi-Cars | 7337-32 | 5489 | Box fastening bolt & nut | 1932 to 1950--Servi-Cars | 7340-35 | 84800-35 | Box cover (Specify color number listed on color chart - solid colors only) | 1935 to 1941--GD & GDT Servi-Cars,1942 to 1950--Servi-Cars | 7340-39 | Box cover (Specify color number listed on color chart - solid colors only) | 1939 to 1941--G & GA Servi-Cars | 7342-40 | 84829-40 | Bracket shoulder bolt | 1940 to 1950--Servi-Cars | 7345-35A | 84825-35 | Cover stop assembly | 1935 to 1950--Servi-Cars | 7349-35A | 84845-35 | Cover latch | 1935 to 1941--GD & GDT Servi-Cars, 1942 to 1950--Servi-Cars | 7349-39 | Cover latch | 1939 to 1941--G & GA Servi-Cars | 7354-39 | 84925-39 | Hand rail (right) | 1939 to 1950--Servi-Cars | 7354-39A | 84927-39 | Hand rail (left) | 1939 to 1950--Servi-Cars | 7355-39 | 84932-39 | Hand rail reinforcement 4-7/32" long | 1939 to 1941--G & GA Servi-Cars | 7355-39A | Hand rail reinforcement, 7-1/4" | 1939 to 1941--G & GA Servi-Cars | 7355-39B | Hand rail reinforcement (2), 10" | 1939 to 1941--GD k GDT Servi-Cars | 7355-39C | Hand rail reinforcement, R.H. | 1939 to 1941--GD & GDT Servi-Cars | 7355-39D | 84936-39 | Hand rail reinforcement, L.H. | 1939 to 1941--GD & GDT Servi-Cars | 7355-42 | 84932-42 | Hand rail reinforcement | 1942 to 1950--Servi-Cars | 7355-42A | 84933-42 | Hand rail reinforcement, rear | 1942 to 1950--Servi-Cars | 7358-32A | 84945-32 | Box cover cushion | 1932 to 1941--GD & GDT Servi-Cars, 1942 to 1950--Servi-Cars | 7358-39 | Box cover cushion & fittings | 1939 to 1941--G & GA Servi-Cars | 7359-35 | 84949-35 | Cushion metal strap, 18-1/4" | 1935 to 1950--Servi-Cars | 7362-32 | 84902-32 | Bumper only | 1932 to 1950--Servi-Cars | 7365-32 | 84904-32 | pumper bracket | 1932 to 1950--Servi-Cars | 7370-32A | Lower apron & brackets (specify color) | 1932 to 1941--GD & GDT Servi-cars | 7370-37A | 85000-37 | Front apron & brackets (specify color) | 1937 to 1941--GD Servi-cars, 1942 to 1950--Servi-cars | 7370-39 | Front apron & brackets (specify color) | 1939 to 1941 G & GA Servi-cars | 7376-37 | 85006-37 | Front apron bracket (right) | 1937 & 1938 G & GD, 1939 to 1950--Servi-cars | 7376-37A | 85007-37 | Front apron bracket (left) | 1937 & 1938 G & GD, 1939 to 1950--Servi-cars | 7376-46 | 85015-46 | Servi-car rear apron and bumper brace | 1947 to 1950--Servi -cars | 7377-46 | 85017-46 | Rear apron and bumper brace shim | 1947 to 1950-Servi-cars | 7380-39 | Right fender with braces (prime color only) | 1939 to 1941--G Servi-cars | 7380-39A | 85040-39 | Right fender with braces (prime color only) | 1939 to 1941--GD Servi-cars, 1942 to 1950--Servi-cars | 7381-39 | Left fender with braces (prime color only) | 1939 to 1941 --G Servi-cars | 7381-39A | 85042-39 | Left fender with braces (prime color only) | 1939 to 1941--GD Servi-cars, 1942 to 1950-Servi-cars | 7384-39 | 85101-39 | Right fender side strip | 1939 to 1950--Servi-cars | 7385-39 | 85102-39 | Left fender side strip | 1939 to 1950--Servi-cars | 7386-39 | 85100-39 | Set of rear fender side moldings cpt. | 1939 to 1950--Servi-cars | 7401-39 | Check strap and fittings | 1939 to 1941--Servi-Cars | 7405-39 | Check strap with ends | 1939 to 1941--Servi-Cars | 7405-42A | 85202-42 | Shock absorber cpt. - right hand | 1942 to 1950--Servi-Cars | 7405-42B | 85203-42 | Shock absorber cpt. - left hand | 1942 to 1950--Servi-Cars | 7407-32 | Check strap spring | 1939 to 1941--Servi-Cars | 7413-42 | 85211-42 | Shock absorber upper bracket | 1942 to 1950--Servi-Cars | 7414-39 | Front check strap bracket, right | 1939 to 1941--Servi-Cars | 7414-39A | Front check strap bracket, left | 1939 to 1941--Servi-Cars | 7414-42 | 85220-42 | Shock absorber lower bracket - left hand | 1942 to 1950--Servi-Cars | 7415-39 | 88693-39 | Rear check strap clamp | 1939 to 1941--Servi-Cars | 7415-39A | Check strap clamp bracket | 1939 to 1941--Servi-Cars | 7415-42 | 85221-42 | Shock absorber lower bracket - right hand | 1942 to 1950--Servi-Cars | 7416-39 | Check strap guide | 1939 & 1940-Servi-Cars | 7416-41 | Check strap guide | 1941-Servi-Cars | 7416-42 | 85213-42 | Shock absorber upper pivot stud | 1942 to 1950--Servi-Cars | 7417-39 | 5438 | Carriage bolt and nut | 1939 to 1941--Servi-Cars | 8045-36F | 41692-36 | Brake operating shaft spring washer | 1935 to 1950--solo | 8113-33 | 29468-46 | Control coil holder rubber housing | 1939 to 1946 | 82001-41 | 82001-41 | Tow bar complete | 1941 to 1957 | 82010-49 | 82010-49 | Tow bar fork | 1947 to 1957 | 82049-32 | 82049-32 | Set of clamp jaws--Std. (fits cars except those listed for special clamps) | 1947 to 1957 | 82050-49 | Upper clamp, standard | Replaced by 82050-49A | 82055-49 | 82055-49 | Clamp set | 1948 to 1950 | 82060-49 | 82060-49 | Lower clamp & screw | 1949 to 1957 | 82067-49 | 82067-49 | Clamp screw spacer | 1949 to 1957 | 82095-49 | 82095-49 | Clamp handle | 1949 to 1957 | 82099-49 | 82099-49 | Center shaft support | 1949 to 1957 | 82119-49 | 82119-49 | Clamp side plate assembly | 1949 to 1957 | 82140-49 | 82140-49 | Swivel block end screw | 1949 to 1957 | 82147-49 | 82147-49 | Clamp rubber rest | 1949 to 1957 | 82160-49 | 82160-49 | Center shaft | 1949 to 1957 | 82175-49 | Swivel block | 49 to 57 | 82181-49 | 82181-49 | Connection block | 1949 to 1957 | 82185-49 | 82185-49 | Clamp support to fork connection | 1949 to 1957 | 82186-49 | 82186-49 | Connection screw plug | 1949 to 1957 | 82301-49 | 82301-49 | Auxiliary clamp complete | 49 to 50 | 82360-49 | 82360-49 | Connection ball | 49 to 56 | 82370-49 | 82370-49 | Rubber rest assembly for Chrysler | 49 to 56 | 9-36 | 16692-36 | Front cylinder head (marked 5.5) iron | 1936 to 1950--G, W & WL | 9-39 | 16681-39 | Front cylinder head (marked 4.6) | 1940 to 1946--WLD, 1947 to 1950 | 9-40M | 16692-40 | Front cylinder head, aluminum | 1940 to 1943--WLA & WLC; Some 1945 & 1946--WL | 9005 | 9005 | Armature bearing (small) | 49 to 57--radio generator | 9007 | 9007 | Armature bearing (large) | 49 to 57--radio generator | 91007-48 | 91007-48 | Rear chrome bumper complete | 1940 to 1954--all models | 91010-48 | 91010-48 | Rear bumper rod | 1940 to 1954--all models | 91012-48 | 91012-48 | Rear bumper tube | 1940 to 1954--all models | 91019-48 | 91019-48 | Rear bumper tube bracket | 1940 to 1957--all models | 91028-48 | 91028-48 | Rear bumper stabilizer. spring (2) | 1940 to 1957--WL model | 91034-48 | 91034-48 | Rear bumper washer | 1940 to 1957--all models | 91075-49 | 91075-49 | Front bumper complete (Replaced by 91075-55) | 91076-49 | 91076-49 | Front bumper only | 1940 to 1954--all models | 91079-49 | 91079-49 | Front bumper extension | 1940 to 1954--all models | 91083-49 | 91083-49 | Front bumper extension eye bolt (4) | 1940 to 1957--all models | 91085-49 | 91085-49 | Front bumper screw (2) | 1940 to 1955--all models | 91086-49 | 91086-49 | Front bumper eye bolt washer (4) | 1940 to 1957--all models |