picked up a 4 fin cam cover for outside oiler pans. the previous owner welded over the the hole where the oiler screw goes and also had the cover chromed. i had the chrome removed , now i want to fix the stress cracks around a couple of mounting holes and have the oiler screw hole reopened and machined so that it seals up when the screw with the brass washer is installed. is there anyone besides headhog ( he is just way to swamped with work right now) that can do this?
gracias,
arnulfo
1963 cam cover repair
-
- Senior Member
- Posts: 552
- Joined: Sat Jun 14, 2008 5:22 am
- Bikes: 1963 pankenstein ; 1965 flh ; 1978 shovelhead lowrider
- Has thanked: 67 times
- Been thanked: 129 times
-
- Member
- Posts: 20
- Joined: Fri Feb 02, 2007 12:39 am
Re: 63 cam cover
I've not had him do any work for me but his stuff looks good..
Try Tom at Creekside Welding, http://www.creeksidemc.com/" onclick="window.open(this.href);return false;
Jason
Try Tom at Creekside Welding, http://www.creeksidemc.com/" onclick="window.open(this.href);return false;
Jason
-
- Senior Member
- Posts: 552
- Joined: Sat Jun 14, 2008 5:22 am
- Bikes: 1963 pankenstein ; 1965 flh ; 1978 shovelhead lowrider
- Has thanked: 67 times
- Been thanked: 129 times
-
- Inactive member
- Member
- Posts: 14
- Joined: Fri Nov 19, 2010 5:59 pm
- Bikes: Harley-Davidson Roadking twincam
HD. FL 53 Panhead - Location: Spain
- Has thanked: 2 times
Re: 63 cam cover
Hi, arnulfo. I have same problems with my panhead 53, but my english is very poor.
It's possible to speak with you in spanish about same bike's questions??
There is not possible whit MP.
Regards:
Wys
It's possible to speak with you in spanish about same bike's questions??
There is not possible whit MP.
Regards:
Wys