Stock flywheels 1951 pan
I am researching a source for 74" flywheels for my pan
-
- Senior Member
- Posts: 2087
- Joined: Fri May 24, 2002 1:00 am
- Bikes: 64FL 99FLHR 01FXSTD
- Location: Mpls. MN.
- Has thanked: 72 times
- Been thanked: 145 times
Stock flywheels 1951 pan
Hi, I'm researching a source for 74" flywheels for my pan. I always liked the way my old pan performed and for the good of this old motor, 74" makes sense. My 4 1/2" flywheels need new shafts anyway. How bout Truet & Osborn? This is a 51 FL. Thanks for any ideas...MW
-
- Senior Member
- Posts: 2087
- Joined: Fri May 24, 2002 1:00 am
- Bikes: 64FL 99FLHR 01FXSTD
- Location: Mpls. MN.
- Has thanked: 72 times
- Been thanked: 145 times
Re: Stock flywheels 1951 pan
mbskeam, how much did they set you back? My S&S stroker set-up needs new shafts anyway so 74" is lookin' better to me.MW
-
- Senior Member
- Posts: 1014
- Joined: Fri Apr 18, 2003 12:26 pm
- Bikes: *
- Location: Sultan, WASH
- Been thanked: 6 times
- Contact:
Re: Stock flywheels 1951 pan
well they called today, and gave me the price of 675.00 shipped to me. I sent them my parts, rods and the 3 shafts.
it is 975.00 if you just buy a new set up from them. very fast turn around time one week, and that is with a holiday in there.
http://www.truettandosborn.com/flywheels.htm
mbskeam
it is 975.00 if you just buy a new set up from them. very fast turn around time one week, and that is with a holiday in there.
http://www.truettandosborn.com/flywheels.htm
mbskeam
-
- Member
- Posts: 32
- Joined: Tue Aug 10, 2004 4:54 pm
- Bikes: 1959 Bastard FLH
1989 FLHTC - Location: Colorado
- Contact:
Re: Stock flywheels 1951 pan
I don't know anything about these, the price is almost to good to be true
http://victorylibrary.com/80OHV.htm
anyone have any first hand knowlege?
http://victorylibrary.com/80OHV.htm
anyone have any first hand knowlege?
-
- Former member
- Member
- Posts: 119
- Joined: Wed Sep 03, 2003 6:24 am
- Bikes: -
- Been thanked: 1 time
Re: Stock flywheels 1951 pan
I put a set of 80 in wheels and rods balanced in my 51 from T&O . Very nice setup and very smooth running