Greetings to all ,
have a question on the biker and good peaple...
I have clear Panhead Case Left side with VIN Nummber built Year 1952
VIN 52 FL 16 * *.......series number on the case from the inside
E
112 - 481.......and * 120 *
and seeking original / matching Case right side or Case which fits and I can build it without problems !
Has somebody an idea or experience ?
Thanks in advance for the help , tips ... regards
Panhead 1952 Case ...
-
- Junior Member
- Posts: 2
- Joined: Thu Mar 12, 2015 9:57 am
- Bikes: Shovel '79
-
- Moderator
- Senior Member
- Posts: 8413
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 483 times
- Been thanked: 2958 times
Re: Panhead 1952 Case ...
Any '48 to '57 case will bolt on and work without any special modifications. ideally a '48 -'52 type without provision for hydraulic lifters, but if you want to run them use a '53-'57 type. '58 and up right case has a bigger main bearing.
-
- Junior Member
- Posts: 2
- Joined: Thu Mar 12, 2015 9:57 am
- Bikes: Shovel '79