1956 Rebuild

Bottom End (crankcases and crankshaft)
Post Reply
concrete guy
Member
Posts: 106
Joined: Wed Apr 09, 2008 6:02 pm
Location: Iowa

1956 Rebuild

#1

Post by concrete guy »

I have been getting back to my rebuild......slowly but surely. Here's the mainshaft tool I built so I could deck the cases.........Scott

Image

Image

Image

Image
concrete guy
Member
Posts: 106
Joined: Wed Apr 09, 2008 6:02 pm
Location: Iowa

Re: 1956 Rebuild

#2

Post by concrete guy »

I knew they needed trued up but until I ran an indicator across them I truely didn't know how messed up they were. The aluminum had pulled up badly where the studs were.

Image
Post Reply

Return to “Bottom End / Crankcases / Flywheels”