Panhead oil pump
-
- Junior Member
- Posts: 1
- Joined: Tue Oct 13, 2015 1:06 pm
- Bikes: 1950 panhead
- Location: Sc
Panhead oil pump
I converted a 1950 pan/shovel back to panhead with inside oilers,I have the knucklehead style oil pump so I been told..I plugged the pump where it fed oil to shovel rockers,is there anything else I need to do to be sure I'm getting oil up through the inside to pan rockers,anyway to confirm that I am ?
-
- Former member
- Senior Member
- Posts: 3336
- Joined: Sat Jun 26, 2010 1:54 pm
- Bikes: 1958flh 1969sporty,had a knuckle but sold back to original owner
- Location: NEW JERSEY
- Has thanked: 195 times
- Been thanked: 278 times
Re: Panhead oil pump
Wildcard---As long as you stopped the feed to the outside & your gasket for YOUR YEAR bike matches everything on the pump/No troubles./Make sure the feed holes in the barrels are in correct location if you had someone do it.---Respectfully----RICHIE