remote filter 48 cast pump cover

Lubrication System (oil feed pump and scavenger pump, reservoir, filter, and lines)
Post Reply
1951 adam
Senior Member
Posts: 889
Joined: Mon Apr 02, 2012 5:35 pm
Bikes: 1951 panhead , 1995 dyna
Has thanked: 116 times
Been thanked: 47 times

remote filter 48 cast pump cover

#1

Post by 1951 adam »

Anyone know what I can use for a fitting from pump cast cover to filter line? All the fittings I see are for the late 50 aluminum pump covers, any help would be much apreciated, also what return line?
oldbob
Member
Posts: 171
Joined: Tue Feb 06, 2007 11:48 am
Bikes: 1948 UL
Location: melba idaho
Has thanked: 1 time
Been thanked: 2 times

Re: remote filter 48 cast pump cover

#2

Post by oldbob »

Old steel line ends with line pex crimped on worked well for me.

bob
You do not have the required permissions to view the files attached to this post.
1950Panhead
Senior Member
Posts: 2404
Joined: Wed Jul 07, 2010 4:28 am
Bikes: 1950Panhead
Location: USA
Has thanked: 1 time
Been thanked: 366 times

Re: remote filter 48 cast pump cover

#3

Post by 1950Panhead »

Nipple 63533-15, pump to filter 63500-50
Jerry
RUBONE
Moderator
Senior Member
Posts: 8378
Joined: Sat Nov 15, 2008 4:09 am
Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
Has thanked: 478 times
Been thanked: 2933 times

Re: remote filter 48 cast pump cover

#4

Post by RUBONE »

Original oil filters for ''48-'49 models used a line with a standard flare on the pump end and used the original fitting on the pump cover. A 63525-50 fitting will also screw directly into the cover allowing use of rubber sealed lines.
Robbie
1951 adam
Senior Member
Posts: 889
Joined: Mon Apr 02, 2012 5:35 pm
Bikes: 1951 panhead , 1995 dyna
Has thanked: 116 times
Been thanked: 47 times

Re: remote filter 48 cast pump cover

#5

Post by 1951 adam »

Thanks for the info! now some research.....
58flh
Former member
Senior Member
Posts: 3332
Joined: Sat Jun 26, 2010 1:54 pm
Bikes: 1958flh 1969sporty,had a knuckle but sold back to original owner
Location: NEW JERSEY
Has thanked: 195 times
Been thanked: 277 times

Re: remote filter 48 cast pump cover

#6

Post by 58flh »

ROBBIES is textbook perfect!---But I went the other way also ,same as OLDBOB,& no troubles to date,Also spliced in a filter!---Richie
1951 adam
Senior Member
Posts: 889
Joined: Mon Apr 02, 2012 5:35 pm
Bikes: 1951 panhead , 1995 dyna
Has thanked: 116 times
Been thanked: 47 times

Re: remote filter 48 cast pump cover

#7

Post by 1951 adam »

Robbie, is this the correct oil line to filter from pump 63500-48 ? Dennis corrso lists it as a 48 49, I did find the fitting on there site, Thanks
Robert Luland
Senior Member
Posts: 1032
Joined: Sun Sep 02, 2007 7:56 pm
Bikes: 1922 J, 1922 JD, 1937 ULH, 1946FL 1948FL, 1957FL, 1960FLH, 1965XLCH, 1995 FLHT
Location: Hoboken, NJ
Been thanked: 121 times
Contact:

Re: remote filter 48 cast pump cover

#8

Post by Robert Luland »

Just call Clete at Old Dude and he'll send you the right fitting and as listed above call Dennis and get the right line. Bob L
Post Reply

Return to “Lubrication System/Oil pump/Oil filter”