Panhead cylinder paint

[rolig]

Does anyone know of a good paint to use on cylinders after a sandblasting ?

[PanPal]

I like Aluminium duplicolor spray paint. Also, only 48 cylinders were Black. But if that's what you want Duplicolor comes in Gloss and flat Black also.

[blewcrab]

long ago when we were all pups , everyone used a heat resistant wrinkle finish on the jugs . It looked great but I haven't seen this product in many years,

[58flh]

I use the Hi-Temp paint that Napa keeps in stock.After you paint them stick them in a pre-heated oven at 110-degrees for 20-min.-Then after it cools -your good to go.-I believe Dupli-color is applied the same way.I have used Dupli-color in the past & its a good paint product.About the WRINKLE-FINISH--I have a can from last year that I used & the manufacturer is KRYLON.---Respectfully----RICHIE

[VPH-D]

Heat Resistanty Silver is still available from the factory. However, a can costs about $ 25.00.
VPH-D

[rolig]

Thanks for all the replays.

[Bigincher]

Heat Resistanty Silver is still available from the factory. However, a can costs about $ 25.00.
VPH-D

You can just buy it at the dealer's?
That's good to know. Thanks.