I have a set of leather bags on my '52 FL that are riveted to the "half-moon" style plates that boltto the fenders. I have been noticing that the rivets are pulling through the leather. i would like to replace hem-does anyone know where to get these rivets? they are about 1/2" long, and the small end is hollow, and split into (I think) 6 sections.
Andy
sadlebag rivets
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Please do not start new topics here, but here: New Panhead and Flathead topics
-
- Senior Member
- Posts: 6937
- Joined: Sun Feb 10, 2002 2:30 am
- Bikes: -
- Location: Central Illinois
- Has thanked: 112 times
- Been thanked: 310 times
Andy!
If you cannot find a saddle-and-tack shop near you, it may be necessary to order from a supplier like http://www1.mscdirect.com/CGI/GSDRVSM?P ... 0062401603
The ends were split into a star by a rivet press, which is another good reason to search out a local pro.
I found that a common brake riveter works great.
....Cotten
If you cannot find a saddle-and-tack shop near you, it may be necessary to order from a supplier like http://www1.mscdirect.com/CGI/GSDRVSM?P ... 0062401603
The ends were split into a star by a rivet press, which is another good reason to search out a local pro.
I found that a common brake riveter works great.
....Cotten
-
- Inactive member
- Member
- Posts: 27
- Joined: Thu Jul 24, 2008 6:43 pm
- Been thanked: 5 times
I have about 10,000 correct semi-tubular rivets in stock as well as the tool to do the star peen. contact me at paquette@earthlink.net --Michael