anyone have an adjustment spec sheet for 2 unit 6 volt delco regulators? my bike is 2 brush.
i have a nice one that needs servicing, just can't find any info!
i figured i'd go back to using it since i am tired of popping 40 bucks every year for an accel unit.
thanks in advance!
john
delco remy voltage regulator spec sheet?
Forum rules
Please start new topics here: New Panhead and Flathead topics
Please start new topics here: New Panhead and Flathead topics
-
- Moderator
- Senior Member
- Posts: 3713
- Joined: Mon Dec 01, 2003 11:38 pm
- Bikes: '42 WLA X 2, '55FL, '93 Ultra Classic, '91 Fatboy, '97 883, '03 Rokon Trailbreaker, '83 GPz 750.
- Has thanked: 71 times
- Been thanked: 128 times
well i got it to work by cleaning the contacts and adjusting the set screws...
it seems to be working ok, i haven't had a chance to put an ammeter on it yet. the headlight does brighten when i speed the motor up.
having the gap data would be helpful.
on the other hand, getting it close is probably ok too!
john
it seems to be working ok, i haven't had a chance to put an ammeter on it yet. the headlight does brighten when i speed the motor up.
having the gap data would be helpful.
on the other hand, getting it close is probably ok too!
john
-
- Inactive member
- Senior Member
- Posts: 1401
- Joined: Sat Apr 03, 2004 5:54 am
- Bikes: -
- Location: north florida
- Been thanked: 7 times
JohnHD
I think those specs are in they HD tech. manual , I don't have mine here with me so I can't look them up right now. You know I'm sure, that they make some good electronic reg. out there ,Cycle Electric for one and they have one thats low out put if ya need that also . I know they are all around $ 100 bucks but I and others are getting good service out of them so far, of course I changed mine over to 12 V. I will look in my Pan manual to see if spec's are there tonight.
I think those specs are in they HD tech. manual , I don't have mine here with me so I can't look them up right now. You know I'm sure, that they make some good electronic reg. out there ,Cycle Electric for one and they have one thats low out put if ya need that also . I know they are all around $ 100 bucks but I and others are getting good service out of them so far, of course I changed mine over to 12 V. I will look in my Pan manual to see if spec's are there tonight.
-
- Inactive member
- Senior Member
- Posts: 1401
- Joined: Sat Apr 03, 2004 5:54 am
- Bikes: -
- Location: north florida
- Been thanked: 7 times