Panhead RH-55 tail lamp

Electrical issues
Forum rules
Please start new topics here: New Panhead and Flathead topics
Post Reply
thepigstye
Member
Posts: 264
Joined: Sat Oct 06, 2007 3:18 pm
Bikes: 41 WLD, 47 WL, 51 G, 48 S, 53 STX, 55B, 56 ST, 57 FLH,60 BT, 61 BT, 62BTH
Been thanked: 4 times

Panhead RH-55 tail lamp

#1

Post by thepigstye »

Anyone got the guts for a RH-55 lamp? I have the bezel. both lens and a good tail lamp body, but the guts are missing. Cash or trades.
4pans1man
Member
Posts: 196
Joined: Wed Jul 22, 2009 9:32 pm
Bikes: XXXXXXXXXXXXXXX
Location: OHIO
Been thanked: 19 times

Re: Panhead RH-55 tail lamp

#2

Post by 4pans1man »

Pigstye,

I have several Guide taillights out in the garage. I'll look and see if the guts are any good in any of them. There has to be at least one good one. I'll pm you later with what I find.

..........Tony.
thepigstye
Member
Posts: 264
Joined: Sat Oct 06, 2007 3:18 pm
Bikes: 41 WLD, 47 WL, 51 G, 48 S, 53 STX, 55B, 56 ST, 57 FLH,60 BT, 61 BT, 62BTH
Been thanked: 4 times

Re: Panhead RH-55 tail lamp

#3

Post by thepigstye »

Thanks Tony
4pans1man
Member
Posts: 196
Joined: Wed Jul 22, 2009 9:32 pm
Bikes: XXXXXXXXXXXXXXX
Location: OHIO
Been thanked: 19 times

Re: Panhead RH-55 tail lamp

#4

Post by 4pans1man »

Pigstye,

Send an e-mail address. I took the guts from a '55 light. The socket is nice and has the mounting screws with it. Tested with a 6 volt charger and it worked well. I'll send a photo to your e-mail address. $20 and that includes shipping.

.........Tony.
thepigstye
Member
Posts: 264
Joined: Sat Oct 06, 2007 3:18 pm
Bikes: 41 WLD, 47 WL, 51 G, 48 S, 53 STX, 55B, 56 ST, 57 FLH,60 BT, 61 BT, 62BTH
Been thanked: 4 times

Re: Panhead RH-55 tail lamp

#5

Post by thepigstye »

Sounds good Tony. Thanks

pigstye13@aol.com
thepigstye
Member
Posts: 264
Joined: Sat Oct 06, 2007 3:18 pm
Bikes: 41 WLD, 47 WL, 51 G, 48 S, 53 STX, 55B, 56 ST, 57 FLH,60 BT, 61 BT, 62BTH
Been thanked: 4 times

Re: Panhead RH-55 tail lamp

#6

Post by thepigstye »

Tony, can ya post a picture of one of your original 68119-55 tail lamp outlook lens screw.I may have some NOS ones, but would like to see what they look like. I could also use a couple of the 68114-55 tail lamp outlook lens screw speed nuts
Post Reply

Return to “Electrical”