DH49 Guide Light Bulb Question...

[HD48FL]

What type of socket (bulb) is used in the original DH49 guide lights? Can I get these from an auto parts store, like napa?

[UPSROD]

HD48FL, For turn signals they use 1129 for 6 volt and 1156 for 12 volt, I don't know what is right for DH49 as running lights....Rod

[HD48FL]

HD48FL, For turn signals they use 1129 for 6 volt and 1156 for 12 volt, I don't know what is right for DH49 as running lights....Rod

Perfect, thanks for the response. Just looking for the socket, 1129 or 1156, that's what I was after.

[Panshovevo]

Okay, I'm confused. Where I come from, a bulb is the thing that makes the light, and the socket is what the bulb is held by, and an 1156 is a single filament 12 volt bulb. Which are we talking about here?

Regards,
John

[HD48FL]

Okay, I'm confused. Where I come from, a bulb is the thing that makes the light, and the socket is what the bulb is held by, and an 1156 is a single filament 12 volt bulb. Which are we talking about here?

Regards,
John

I needed to know that an 1156 is the correct "socket" for that light. I don't care which bulb it is as long as I have the right socket. 1129 is for 6 volt and 1156 is for 12 volt. I didn't know either and that's why I asked. I'm not using the bulb, ust the socket from the light.

[Hog54]

Im confused too.Isnt the socket the same and just the bulbs voltages are different?

[HD48FL]

Im confused too.Isnt the socket the same and just the bulbs voltages are different?

Understood, I was just curious as to which bulb fits those lights, got the answer. Thanks.