Wire Harness Routing
Forum rules
Please start new topics here: New Panhead and Flathead topics
Please start new topics here: New Panhead and Flathead topics
-
- Member
- Posts: 403
- Joined: Sun Dec 21, 2008 2:15 am
- Bikes: 1952 FL
- Location: California
- Has thanked: 4 times
- Been thanked: 30 times
Wire Harness Routing
Does anyone have diagram, picture, or just a sketch or drawing that shows the proper routing for the wiring on a 49 or 52 pan? For several years I ran my own wiring but now have a complete reproduction harness. I know all the hook ups, I just need to know how it routes along the frame tubes. Thanks for any help on this. Oh I am using both the seat post T/B and the front fork T/B. Mostly concerned with routing from dash & ign. sw. to the T/B's. The segment I have that runs from the dash to the front fork T/B seems way too long.
-
- Moderator
- Senior Member
- Posts: 3711
- Joined: Mon Dec 01, 2003 11:38 pm
- Bikes: '42 WLA X 2, '55FL, '93 Ultra Classic, '91 Fatboy, '97 883, '03 Rokon Trailbreaker, '83 GPz 750.
- Has thanked: 70 times
- Been thanked: 128 times
Re: Wire Harness Routing
haluua,
the harness makes a big u shaped bend around the neck and is held in place with clip.
the picture should explain alot...
john
the harness makes a big u shaped bend around the neck and is held in place with clip.
the picture should explain alot...
john
- Attachments
-
- panwiring2.jpg (47.94 KiB) Viewed 749 times