Generator/regulator wiring

Can someone help me with the wiring of a two brush generator to a bosch regualtor

Electrical issues
Forum rules
Please start new topics here: New Panhead and Flathead topics
Post Reply
gpp3442
Former member
Member
Posts: 35
Joined: Wed Oct 13, 2004 12:34 am
Bikes: *

Generator/regulator wiring

#1

Post by gpp3442 »

Gentlemen,
I've searched pasts posts and found some info, but would appreciate a detailed explanation,she (57)has been converted to 12 volt, can someone help me with the wiring of a two brush generator to a bosch regualtor, to ignition/battery, markings are F, A and a wire off the end cap. On the regulator the B+ goes to the battery?-or should it go to a post on the ignition? I am not electrically inclined as Kell well knows from pasts posts, so any help would be greatly appreciated.
Thanks,
George III
panz4ever
Senior Member
Posts: 696
Joined: Sat Jun 05, 2004 5:55 pm
Bikes: EL, FXE & FLH
Has thanked: 20 times
Been thanked: 69 times

Re: Generator/regulator wiring

#2

Post by panz4ever »

Well if i have it right... should be as follows

A side of generator goes to D+ side of Bosch regulator
F side of generator goes to DF side " " "
D- side of Bosch goes to ground

B+ side on Bosch needs to go to +side of battery and to battery terminal on ignition switch
gpp3442
Former member
Member
Posts: 35
Joined: Wed Oct 13, 2004 12:34 am
Bikes: *

Re: Generator/regulator wiring

#3

Post by gpp3442 »

Gentlemen,
Panhead thanks for the link.
panz4ever thank you for the explanation.
George
Post Reply

Return to “Electrical”