Wire routing
Forum rules
Please start new topics here: New Panhead and Flathead topics
Please start new topics here: New Panhead and Flathead topics
-
- Member
- Posts: 12
- Joined: Fri Jul 17, 2015 6:20 pm
- Bikes: 1960 panhead 1973 shovel head FLH 1975 Shovelhead FLH
Wire routing
Hey guys, wiring my 1960 Panhead and am not quite sure how to route the wiring from the fork terminal to the dash plate. Also the wiring harness from the terminal block to the dash. Any photos or help would be great. Just want to get it right! Thanks, Captain80
-
- Former member
- Senior Member
- Posts: 3336
- Joined: Sat Jun 26, 2010 1:54 pm
- Bikes: 1958flh 1969sporty,had a knuckle but sold back to original owner
- Location: NEW JERSEY
- Has thanked: 195 times
- Been thanked: 278 times
Re: Wire routing
Capt.80----There are diagrams in the K-base for your bike!/However this will give you some perspective Go threw the K-Base on all different wiring QUESTIONS!---THERE you will see how the Factory routed them from day-1.There are A lot of ?s just like yours!--There are A lot of PICS. that will help you.----Respectfully----Richie
-
- Member
- Posts: 12
- Joined: Fri Jul 17, 2015 6:20 pm
- Bikes: 1960 panhead 1973 shovel head FLH 1975 Shovelhead FLH
-
- Moderator
- Senior Member
- Posts: 8406
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 481 times
- Been thanked: 2955 times
Re: Wire routing
Most of the early wire routing is photo documented in Bruce Palmer's 2nd edition of "How to restore your Harley-Davidson".