I was curious if this could be a problem? I have a rubber fuel hose, coming out of the factory fuel petcock and running between the jugs, and going to the s&s carb? Could the fuel be getting too hot and vapor locking? Or will it be alright the way it is?
thanks
Fuel hose: getting too hot and vapor locking
Forum rules
Please start new topics here: New Panhead and Flathead topics
Please start new topics here: New Panhead and Flathead topics
-
- Member
- Posts: 11
- Joined: Tue Mar 01, 2005 10:16 pm
-
- Member
- Posts: 35
- Joined: Sat Jan 22, 2005 9:16 am
- Location: texas
Re: Fuel hose: getting too hot and vapor locking
that is how my fuel line runs.....no problem in 21 years of riding. i also have a small fuel filter in the line. this is on a 65flh and running a linkert
chucktx
chucktx
-
- Member
- Posts: 412
- Joined: Fri Aug 23, 2002 10:05 pm
Re: Fuel hose: getting too hot and vapor locking
Rubber is an insulator. With good quality line, you should be okay.
-
- Member
- Posts: 126
- Joined: Fri Aug 06, 2004 5:10 am
- Bikes: 49 fl,71 honda 750 sohc k1,98 cbr600f3,2)gl1100 goldwings
- Location: hopewell va
- Contact:
Re: Fuel hose: getting too hot and vapor locking
same here never have a had a problem running like that