Could use some help here??
I am trying to determine what the stock outer diameter of the exhaust spigot is on a panhead.
I have a 51 and I am trying to restore my exhaust port spigot back to the standard size. I had it heliarced .. now I need to know the stock dimension to mill it down to.
Thanks ..
Ya I didnt want to cut it off and weld on one of those new spigot deals either! This way seemed better for me.
Panhead exhaust spigot diameter
-
Bdog
- Inactive member
- Junior Member
- Posts: 2
- Joined: Mon Feb 22, 2010 10:19 pm
- Bikes: 1951 Pan 1978 Shovel 1988 Evo
- Location: Michigan
-
Robert Luland
- Senior Member
- Posts: 1036
- Joined: Sun Sep 02, 2007 7:56 pm
- Bikes: 1922 J, 1922 JD, 1937 ULH, 1946FL 1948FL, 1957FL, 1960FLH, 1965XLCH, 1995 FLHT
- Location: Hoboken, NJ
- Been thanked: 130 times
- Contact:
Re: Panhead exhaust spigot diameter
The ones on my 48 that just came back from head hog mike out at just a hair over two inch.
-
KB65
- Member
- Posts: 48
- Joined: Mon Jan 18, 2010 7:32 pm
- Bikes: HD Pan - HD Shovel
- Location: Canada
- Has thanked: 2 times
- Contact:
Re: Panhead exhaust spigot diameter
My pipes are off right now....this is a quick measurement....VIN shows 65' :
You do not have the required permissions to view the files attached to this post.
-
Bdog
- Inactive member
- Junior Member
- Posts: 2
- Joined: Mon Feb 22, 2010 10:19 pm
- Bikes: 1951 Pan 1978 Shovel 1988 Evo
- Location: Michigan
Re: Panhead exhaust spigot diameter
Thanks .. thats about what my front is. I just wanted to make sure before I began to remove material from the rear head!