49 Pan Rocker Cover Question

[panz4ever]

Finally got the original heads for my 49 EL redone. Looking at Palmers he talks about the round head screws for the covers.

Looking at the parts book it shows #2675 for screws and #7021 for washers. Looking for x-refernece on back pages and there is no #2675 for screws, only #2672 (10-24x1/2)
round head screw.

NOS Parts has the #2672 in parkerized finish and #7021 washers in either zinc or parkerized finish.

Old Dude does not carry either parts.

So my question please....is the correct screw the #2672? or am I looking for the elusive #2675 that has no listing in the back of the parts book? If so what is the correct size for the #2675 screw and where in the heck do I find them?

What is the correct finish I need for the #7021 washers? Zinc or Parkerized?

[Hog54]

Colony has them.

[1951 adam]

I took some photos at the HD museum, I can't seem to upload them.... They look like plain old 10/24 round head screws that you can get at the hardware store... I'm sure colony is not much different, Thats what I did..I guess you could replate them, left mine zinc. But I'm OK with That, Adam

[panz4ever]

Colony has them.

Not unless I missed it. Colony list original hardware 48-65 for pan covers but they are incorrect. 49 uses neither steel nor aluminum D-ring, just the round head screw and I assume a washer.

[panz4ever]

I took some photos at the HD museum, I can't seem to upload them.... They look like plain old 10/24 round head screws that you can get at the hardware store... I'm sure colony is not much different, Thats what I did..I guess you could replate them, left mine zinc. But I'm OK with That, Adam

Adam, could I get you to email me the pics?

Dave

hd65flh@att.net

[1951 adam]

No problem, send them tonight...

[panz4ever]

With big thanks to Adam...his pic from the HD Museum...pan cover recessed round head screw (this site resizes but the slot is a phillips head)....now to locate them!

344.jpg

[1951 adam]

If you notice they hang past the bottom of the lip of the head a little, I got mine from wurth, they supply the shop with product and hardware. I think you can get them at the hardware store and just replate them in cad. Good luck, glad that helped. Adam

[Hog54]

Colony has them.

Not unless I missed it. Colony list original hardware 48-65 for pan covers but they are incorrect. 49 uses neither steel nor aluminum D-ring, just the round head screw and I assume a washer.

They use phillips round head screws and I think 6 allen head. https://www.hydra-glide.net/phpBB3/view ... w=previous

[panhead]

this site resizes

No, this is a link to a picture on an external site. We automatically resize big pictures, but by clicking on them you'll see the original size.

[58flh]

IF you are going for originality--then COLONY wont help you here!---I believe you will have to do a search & have them cad-plated as someone posted!--(I thought they were parkerized finish,BUT im going from memory!!!)--ALL 8 dont fire like they use to! ---RICHIE

[panz4ever]

The correct screws are #2675 10-24 x 7/16 recessed round head screw; lock washers are #10 x 21/64 x 3/64. Correct finish is cad and best of all found them at Old Dude. The screws are not listed on their site, but a member on another forum suggested I give them a call and it worked.

[awander]

What is a " recessed round head" screw?

[panz4ever]

345.jpg

Maybe this pic is a bit better but to me it looks like a large round head screw that uses a small Phillips tip.

The description of the part i took from the back of my 49-57 parts book.

Photo courtesy of Adam...

[1951 adam]

I took that shot at the HD museum...I would think its correct? I know that on the 51 they had allens as well as phillips....