Hi can some one please tell if the correct fender for 1960 fl Duo glide is 2piece with the hinge or just one piece no hinge.
Thanks Bill
Fender
-
- Member
- Posts: 253
- Joined: Thu Nov 09, 2006 3:38 am
- Bikes: 1965 ElectraGlide
1953 HydraGlide
Pan Super Glide
47 EL Knucklehead w/ Sidecar (Basket) - Location: Oklahoma City
- Has thanked: 13 times
- Been thanked: 57 times
Re: Fender
it is hinged, and will have 2 indentations for the Shock Stud nuts, but curved all the way down the front. There are 3 small screw holes down the centerline a few inches behind the shock stud indentions for the seat spring catch, The hinged piece should have a tail lamp hole shaped like Pocono raceway (Tri-Oval)
65 & later have a flat area pressed in front & below the shock stud nut indents to clear the square oil tank & larger 12V battery.
drinner
65 & later have a flat area pressed in front & below the shock stud nut indents to clear the square oil tank & larger 12V battery.
drinner