Wishbone frame
-
- Former member
- Junior Member
- Posts: 1
- Joined: Sat Oct 09, 2004 9:54 am
Wishbone frame
I'm looking at some early wishbone frames, some have a bar below the backbone, some don't. stock? or were they removed? I need an answer quick as they are on ebay. thanks rbs1997
-
- Member
- Posts: 60
- Joined: Sun Jun 29, 2003 6:31 pm
Re: Wishbone frame
sounds like you mean the "stress bar". Forms a triangle under the headstock/backbone. It should be there. some get removed when frisco mounting tanks,
can't comment on problems but have been advised not to do it as it was put there for a reason!
hope this helps .
ps I don't doubt one could be successfully welded back in to save a worthwhile frame.
can't comment on problems but have been advised not to do it as it was put there for a reason!
hope this helps .
ps I don't doubt one could be successfully welded back in to save a worthwhile frame.
-
- Inactive member
- Member
- Posts: 133
- Joined: Fri Jul 26, 2002 2:59 am
- Bikes: -
- Location: South Florida
- Been thanked: 1 time
Re: Wishbone frame
All Harley Frames had this "cross bar" And removing it is not a good idea. (IMHO) But then again I don't think its too good of an idea to rake em either.
-
- Inactive member
- Member
- Posts: 53
- Joined: Tue Jul 01, 2003 12:40 am
- Bikes: -
- Location: Puget Sound
Re: Wishbone frame
It's been altered, choppa' guys usually substitute the stress bar with a neck gusset.
Check here in the future: http://www.paughco.com/2003_catalog/page70.htm
Let us know if you bought it.
Check here in the future: http://www.paughco.com/2003_catalog/page70.htm
Let us know if you bought it.
-
- Member
- Posts: 178
- Joined: Tue Dec 03, 2002 4:26 am
- Bikes: *
- Location: Maine USA
Re: Wishbone frame
if I had my way....I would rake everything .......
just to give Cotten the extra work....like he needs it.
By the way........... float is working great, thanks Haggis
just to give Cotten the extra work....like he needs it.
By the way........... float is working great, thanks Haggis