Even though I've got my Clymer and all - I'm not exactly where to measure the spring preload on a 56' Panhead?
This is properly because english is not my mothertonque....
Pics anyone?
Thanks,
Henrik
Clutch spring adjustment?
-
Henrik_K
- Inactive member
- Member
- Posts: 18
- Joined: Thu Jul 22, 2010 8:01 am
- Bikes: FL '56
XLH '65 - Location: Copenhagen
-
Panshovevo
- Inactive member
- Member
- Posts: 292
- Joined: Sun Jul 25, 2010 5:18 pm
- Bikes: '50 F model, '76FX/L, '96 96" FXDWG
- Location: SE Florida
- Has thanked: 8 times
- Been thanked: 7 times
- Contact:
Re: Clutch spring adjustment?
Throw the Clymer away and download the factory manual from the library of this web site.
Are you referring to the pressure plate springs, or the mousetrap spring? There have been recent threads on both with good information.
Regards,
John
Are you referring to the pressure plate springs, or the mousetrap spring? There have been recent threads on both with good information.
Regards,
John
-
hplhd
- Senior Member
- Posts: 639
- Joined: Tue Mar 30, 2004 11:48 am
- Bikes: 1998 heritage springer
1959 FLH - Location: indiana, usa
- Has thanked: 17 times
- Been thanked: 19 times
Re: Clutch spring adjustment?
31/32 measurement.... shit i don't know how to show the thread from this a few days ago. pics and everything.
fuck it, trying again. https://www.hydra-glide.net/phpBB3/view ... f=5&t=8647
fuck it, trying again. https://www.hydra-glide.net/phpBB3/view ... f=5&t=8647