Hello
I rebuild My '57 Panhead.
Anyboody knows how to install the clutchbooster (height and position on frame)
Thanks
Greets
Sinnersteel
How to install the Clutchbooster ('57 PAN)
-
- Junior Member
- Posts: 4
- Joined: Fri Dec 26, 2008 2:57 pm
- Bikes: '57 Panhead
'89 frame (build by ?) with '75 shovel engine - Location: Netherlands (Nuth)
-
- Senior Member
- Posts: 1270
- Joined: Fri Jul 03, 2009 8:23 pm
- Bikes: 65 FLH 82 FLH
- Location: Michigan
- Been thanked: 60 times
Re: How to install the Clutchbooster ('57 PAN)
The mousetrap doesn't have to be dead nuts perfect to operate effectively. Find a picture and go from there. The rod going from the mousetrap to the clutch release arm has to clear the shift lever and the ball end of the rod running from the booster to the clutch release arm when fitted will pretty much dictate the proper mounting location of the booster....bosheff
-
- Junior Member
- Posts: 4
- Joined: Fri Dec 26, 2008 2:57 pm
- Bikes: '57 Panhead
'89 frame (build by ?) with '75 shovel engine - Location: Netherlands (Nuth)
Re: How to install the Clutchbooster ('57 PAN)
Thanks Bosheff.
Bosheff wrote:The mousetrap doesn't have to be dead nuts perfect to operate effectively. Find a picture and go from there. The rod going from the mousetrap to the clutch release arm has to clear the shift lever and the ball end of the rod running from the booster to the clutch release arm when fitted will pretty much dictate the proper mounting location of the booster....bosheff