Bad day yesterday!
Clutch screwed up...and kicker started to rotate down all by itself!!! Good thing I was only doing about 20.
Got the Purple bastard home on my trailer. Pulled the kicker cover and the throw out bearing, retaining clip and slinger all fell out!The stop pin on the kicker gear is all bent to hell too!!
Got all new pushrod kit and kicker gear ordered.
Question,....does it matter what side of the tranny I insert the new rod from? Haggis
Ps. Hope this is not payback for calling that 45 a piece of shit...............which it still is
Clutch screwed up
-
- Member
- Posts: 178
- Joined: Tue Dec 03, 2002 4:26 am
- Bikes: *
- Location: Maine USA
-
- Inactive member
- Senior Member
- Posts: 1401
- Joined: Sat Apr 03, 2004 5:54 am
- Bikes: -
- Location: north florida
- Been thanked: 7 times
Re: Clutch screwed up
haggis
Just make sure the stepped end is for the throw out bearing side , it should slide right in from either side. Of course you will probably have to re-adjust your clutch.
, but you knew that.
Just make sure the stepped end is for the throw out bearing side , it should slide right in from either side. Of course you will probably have to re-adjust your clutch.
, but you knew that.
-
- Member
- Posts: 178
- Joined: Tue Dec 03, 2002 4:26 am
- Bikes: *
- Location: Maine USA
Re: Clutch screwed up
Karma rears its ugly head and bites me in the butt!
Teach me to keep my opinions to my self
Seriously though, i'm in the middle of a WLA project myself......and it definately will not look like a reject from the "lets weld a WW2 searchlight to my front fender school"
No disrespect aimed at any Harley models,owners or builders! Haggis.
Ps,.......( it's still as ugly as my dogs ass )
Teach me to keep my opinions to my self
Seriously though, i'm in the middle of a WLA project myself......and it definately will not look like a reject from the "lets weld a WW2 searchlight to my front fender school"
No disrespect aimed at any Harley models,owners or builders! Haggis.
Ps,.......( it's still as ugly as my dogs ass )
Re: Clutch screwed up
haggis-
congrats on your Flat WLA project. We need to see some pics..Unless it's already here ???
Inquiring minds gotta know ??
congrats on your Flat WLA project. We need to see some pics..Unless it's already here ???
Inquiring minds gotta know ??
-
- Member
- Posts: 178
- Joined: Tue Dec 03, 2002 4:26 am
- Bikes: *
- Location: Maine USA
Re: Clutch screwed up
Soon as i can get back to my shop, I'll take some.
Pretty much torn down at the minute but at least it'll give you some idea. Haggis
Pretty much torn down at the minute but at least it'll give you some idea. Haggis