34008-52 shifter cam
-
panhead_kicker
- Senior Member
- Posts: 1608
- Joined: Fri Oct 03, 2008 2:57 am
- Bikes: Pan
FLHP Evo
E-H Super X
Chubble head hack
Servi-car
Topper(s)
Model 64D (Hey its got 3 wheels!) - Location: Indianapolis
- Has thanked: 405 times
- Been thanked: 367 times
34008-52 shifter cam
The shift cam pictured shows a notch worn into the groove just before the peak. Is this something that could be welded up and then ground back down to the proper contour? OR is it even a problem?
You do not have the required permissions to view the files attached to this post.
-
Bosheff
- Senior Member
- Posts: 1270
- Joined: Fri Jul 03, 2009 8:23 pm
- Bikes: 65 FLH 82 FLH
- Location: Michigan
- Been thanked: 60 times
Re: 34008-52 shifter cam
Without a side by side comparison it's hard to tell how much the drum has worn. I've run some pretty sloppy pieces over the years but never had a problem. If ya got the time and means, have at it. Keep in mind that the path in the drum is what untimately locates the shift clutches, so to much play will not be a good thing....bosheff