Would any of you have an extra oversized bottom tranny stud for a panhead tranny?
I'm putting my tranny back together and one of my oversized studs threads are chewed up and the only way I can get them is in a set of four. Was hoping one of you guys might have one that I could purchase from you.
This is 3/8" to 1/2" mounting stud that mounts the plate to the tranny. Thanks.
Tranny stud
-
- Member
- Posts: 56
- Joined: Mon Jun 02, 2008 5:22 pm
- Bikes: *
-
- Member
- Posts: 100
- Joined: Fri Jan 01, 2010 4:04 pm
- Bikes: '03 Fatboy
'14 Slim
'60 FLH
86 XT 350 - Location: St. Louis
- Been thanked: 2 times
Re: Tranny stud
Thanks ncitta. I appreciate your efforts.ncitta wrote:I might, I will look tonight.
-
- Member
- Posts: 56
- Joined: Mon Jun 02, 2008 5:22 pm
- Bikes: *
Re: Tranny stud
Did not find one, I will keep looking, I used only one out of the set I bought last year...
-
- Member
- Posts: 100
- Joined: Fri Jan 01, 2010 4:04 pm
- Bikes: '03 Fatboy
'14 Slim
'60 FLH
86 XT 350 - Location: St. Louis
- Been thanked: 2 times
Re: Tranny stud
Thanks ncitta. Thats what will happen if I have to buy a set. I'll pay $20-$30 for the set and then use one and then probably misplace the rest.
If thats what I have to do I will, but I just hate to waste the set.
If thats what I have to do I will, but I just hate to waste the set.