Trying to get a handle on rpm/speed bands and I'm having no luck finding info on pan gear ratios, also no luck getting into Jack's recommended calculator from Terra-Glide. It seems to be an MS-DOS exe file that I can't open on my Mac. Any suggestions? Thanks.
David
Jack's gear ratio and wheel speed calc
-
- Inactive member
- Member
- Posts: 26
- Joined: Mon Jan 19, 2009 3:04 am
- Bikes: 54 FL
- Location: portland, OR
-
- Inactive member
- Member
- Posts: 26
- Joined: Mon Jan 19, 2009 3:04 am
- Bikes: 54 FL
- Location: portland, OR
Re: Jack's gear ratio and wheel speed calc
Sent a message to Jack, but unfortunately he says he only has the MS-DOS version available and I don't seem able to download it on my Mac. Any help with that appreciated, or maybe someone out there knows the 4 gear ratios for the standard Pan box--then I can plug those into a couple of online calculators. Somewhere I saw these figures: 1st 3.24; second 2.21; third 1.6, fourth 1.23. Do these look right?
David
David
-
- Senior Member
- Posts: 1014
- Joined: Fri Apr 18, 2003 12:26 pm
- Bikes: *
- Location: Sultan, WASH
- Been thanked: 6 times
- Contact:
Re: Jack's gear ratio and wheel speed calc
play with this...
http://www.rbracing-rsr.com/gearspeed.html
http://www.andrewsproducts.com/motorcyc ... G_sets.htm
victory library use to have the ratios online, but I see that you have to payup to see them, will see if I have a printed copy someplace
http://www.rbracing-rsr.com/gearspeed.html
http://www.andrewsproducts.com/motorcyc ... G_sets.htm
victory library use to have the ratios online, but I see that you have to payup to see them, will see if I have a printed copy someplace