| OEM | OEM | Description | Used on |
| 24754-30 | 419-30KA | Sprocket shaft bearing--.0008" O.S. | 30 to 54-61", 74" & 80" twins |
| 24755-30 | 419-30MA | Sprocket shaft bearing--.001" O.S. | 30 to 54-61", 74" & 80" twins |
| 2476-47 | 37581-47 | Clutch drive hub stud nut (3) | 1947 to 1950 |
| 2477-41A | 37584-41 | Clutch drive hub stud (3) | 1941 to 1950 |
| 24775-35 | | Sprocket shaft bearing end | 1939 to 1952--45" twins, 1953 & 1954--Servi-Cars |
| 24775-39 | 421-39 | Oil slinger end 1939 - 1973 | |
| 24776-40 | 421-40 | Left bearing end | 40 to 54-61", 74" & 80" twins |
| 24779-40 | 422-40 | Left bearing washer | 1940 to 1954-61", 74" & 80" twins |
| 24779-55 | | Left bearing spring ring | 55 to 57-74" OHV |
| 2478-41A | | Pin, clutch inner drive hub | |
| 2478-41B | 37586-41 | Clutch drive hub pin (7) | 1941 to 1950 |
| 24781-36 | 358-36 | Left bearing spacer | 1937 to 1954--61", 74" & 80" |
| 24783-44 | 418-44 | sprocket shaft oil seal | Late 1942 WLA Models |
| 2479-41A | 37873-41 | Clutch releasing disc | 1941 to 1950 |
| 24791-36 | 437-36 | Motor fastening bolt (front) | 37 to 47-61", 74" & 80" twins, 48 to 57-0HV |
| 24792-48 | 437-48 | Motor fastening bolt, front | 1948-74" side valves |
| 24794-36 | 438-36 | Motor fastening bolt (rear) (2) | 36 to 57--OHV |
| 24794-37 | 438-37 | Cross shaft bracket center bolt | 1937 to 1947--OHV |
| 24795-48 | 438-48 | Motor mounting spacer | 1948--74" side valves |
| 24797-36 | 439-36 | Motor bolt nut | 1937 to 1957-61", 74" & 80" twins |
| 2480-41 | | Clutch repair kit | WL, WLA, WLC, Servi-car 1941-1973. |
| 24800-36 | 439-36A | Motor bolt lock washer | 1937 to 1957--61", 74" & 80" twins |
| 24805-30 | 446-30 | Crankcase stud (5/16" x 5") | 1936 to 1957--OHV |
| 24806-36 | 447-36 | Crankcase stud (5/16" x 5 7/16") | 36 to 57-0HV |
| 24807-48 | 447-48 | Crankcase stud | Replaced by 24806-36 |
| 24809-30 | 447-30 | Crankcase stud (5/16" x 6") | 1930 to 1957 -- 61", 74" & 80" twins |
| 2481-41A | 37931-41 | Clutch friction disc | 1941 to 1950 |
| 2481-41C | 37952-41 | Outer spring disc | 1941 to 1950 |
| 2481-41E | 37851-41 | Set of lined clutch discs | 1941 to 1950 |
| | | Part 2481-41E (Set of lined clutch discs) consists of: | |
| | | 2481-41A: Clutch friction disc | |
| | | 2481-41C: Outer spring disc | |
| | | 2482-41A: Clutch friction disc lining | |
| | | 2485-41: Clutch friction disc lining rivet | |
| 2481-46 | 37954-46 | Clutch cushion plate | 1947 to 1950 |
| 24810-37 | 446-37 | Crankcase stud - 5/16" x 7-1/8" | 1937 to 1948--74" & 80" side valves |
| 24811-10 | 442-10 | Crankcase stud (1/4" x 1 5/8") (2) | 37 to 57--all W & G models |
| 24811-59A | | 65 to * - FL, FLH; 73 to * - FX, FXS | |
| 24812-37 | 442-37 | Crankcase stud (9/32" x 4 1/2") | 37 to 57--all W & G models |
| 24813-37 | 444-37 | Crankcase stud (1/4" x 5" (2) | 37 to 57--all W & G models |
| 24815-40 | | Crankcase stud (11/32 x 6") | 48 to 57--OHV |
| 24818-52 | | Stud, 5/16-18-5/16-24 x 1-11/16 lg. | 1965 to *--FL, FLH |
| 24819-36 | 591-36 | Oil pump mounting stud (1/4" x 1 11/16") | 37 to 57--all models |
| 24819-37 | 591-37 | Oil pump mounting stud (1/4" x 1 7/16") | 37 to 57--all W & G models, 37 to 48-74" & 80" sidevalves |
| 2482-41A | 37862-41 | Clutch friction disc lining | 1941 to 1950 |
| 24820-36 | 591-36A | Oil pump mounting stud (1/4" x 2 1/4") | 36 to 57-0HV |
| 24827-66 | | STUD, transmission cover (panel kit) | 65 to * -- FL, FLH |
| 24830-41 | 591-41 | Oil pump mounting stud nut (short) | 41 to 54--all W & G models, 41 to 48-74" & 80" sidevalves |
| 24831-41 | 591-41A | Oil pump mounting stud nut (long) | 41 to 54--all models, 55 to 57-74" OHV |
| 2484-29 | | Set of clutch linings and rivets | Late 1939 & 1940 |
| | | Part 2484-29 (Set of clutch linings and rivets) consists of: | |
| | | 2485-40: Sprocket friction disc rivet | |
| | | 2533-26: Clutch sprocket drive disc, fibre | |
| | | 2534-29: Outer clutch disc | |